**Design Concept**
The elegant deer planter sculpture brings a sophisticated touch to home decor. Inspired by classical sculpture with a modern twist, the deer features intricate embossing design with golden embellishments that highlight its artistic value.


This beautiful deer planter is perfect for holding your plants or small items. It has a smooth green design with golden details, making it look very elegant and stylish. It fits well in any room and adds a natural touch to your space.


**Suggested Uses:**

* Desk decor

* Indoor planter

* Gift for nature lovers

* Living room decoration

* Office ornament


**Function**
This planter is both decorative and functional, designed to hold small plants or succulents. It adds a stylish aesthetic to living rooms, balconies, or indoor garden spaces.

**Printing Suggestions**
To achieve the best quality, use fine resolution settings. Opt for PLA or a similar material in finishes compatible with paint to highlight intricate details. Supports are necessary for antlers and delicate features.

**Assembly Instructions**
The model is printed in one piece, ensuring easy set-up. After printing, apply a clear coat to preserve the intricate detailing, particularly the golden accents.





Elegant Deer Planter Sculpture for Home Decor.stl

Free Non Commercial Version found here: 

Bring to life the rolling hills and cosy hobbit home with your very own Bag End inspired Terrarium. This Bonsai Terrarium pot are for those who love indoor plants and Lord of the Rings.

I had a lot of fun designing this and putting it together, and I hope you do too.

===

Print Settings:

Nozzle - 0.4mm

Layer Height - 0.10

Infill - 5-10%

Supports Needed for some over hanging bits. Use the manual overhang brush to add minor supports here and there. 

Materials - Bambu PLA Matte White

Outer brim 

Total Print time ~ 12hrs

Total Filament used ~180g


Note:
- The chimney's are designed to fit disposable chopsticks so you can use it to test moisture and to stir up dirt for better plant health
- The signage I found online and printed on paper to a small size
- I painted it with acrylic and recommend using a water proof lacquer to protect the paint


Lord of the Rings - Hobbiton Bonsai Terrarium Pot

Hobbiton Bonsai Terrarium Pot.3mf

**Vase Mode, No Supports, Quick Print**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints** 

For a bowl version, check out:
**Faces Of Death Bowl - Skull Bowl - https://than.gs/m/1046122**

For another fun pendant light:
**The Flustra - Vase Mode Pendant Light (Large): https://than.gs/m/1047316**

 
The Faces of Death Pendant Light brings a touch of the macabre to any room



**Model Details:**
You can start printing this model right away on a Bambu printer using the prepared 3mf file optimized for printing this model.

This model is designed to fit this Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Assembly Instructions**
Refer to the video in the image carousel

**Other Home Decor:**
**The Hestra - Pendant Light, Vase Mode: https://than.gs/m/1042357
The Trysta - Pendant Light, Vase Mode: https://than.gs/m/1042457
The Stria - Pendant Light, Vase Mode:   https://than.gs/m/1042321
The Scura - Pendant Light, Vase Mode: https://than.gs/m/1046091**

**Safety First**
Intended for use with **9 watt LED Lights**  
Other lights can get too hot and damage/deform the plastic

**Print Settings:**
Vase Mode/Spiralize/Spiral Vase Mode
0.55 mm wall thickness
8 bottom shell layers
Print with the circular cut-out on the build plate

**100% Scale**
Attempting to scale this model up or down will prevent the opening from fitting the intended Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

Please let me know if you would like to see other variations of this lamp.


Faces of Death - Vase Mode Pendant Light, Bambu 3MF

Faces of Death - Vase Mode Pendant Light_Bambu by Mimetics3D.3mf

This beautifully designed vase series mimic an inflated pillow or balloon. Each shows of the small details of movement that would look beautiful as decor on your desk at work or your table at home. They would make an excellent gift or personal pen holder. 

Make sure to check out the other vases in this collection! 
**Private Use Only.
Become a Maker Member for unlimited downloads or become a MERCHANT MEMBER for commercial use. **
Members get priority recommendations and customization. We would love for you to join!
Make sure to like and follow. Post your make so we can see!

Pillow Vase / Planter Mod 2

pillow vase2.stl

This large pot is the first in my **VESUVIUS Collection**, which features dense herringbone ribs to increase strength while creating a dramatic form.

VESUVIUS 001 is 250 mm tall and 250 mm in diameter at the top. The bottom footprint has a 190 mm footprint. This was designed for use with my [250 mm Floating Drip Tray](https://than.gs/m/1027171?affiliateCode=MAKE) to catch excess water runoff.

**_Printing Guidelines_**

The **VESUVIUS** series of prints are designed to be printed in vase/spiral mode in your slicer. For full scale I suggest printing with a **1 mm nozzle width** (even with a 0.4mm nozzle) and 1.6mm of solid bottom layers. No top layers. **Make sure your slicer is not set to close small gaps.** In BambuStudio I set the _'Slice gap closing radius'_ to 0 mm

For the 'wHole' version of the vase mode print, use the maximum number of solid bottom layers before the holes are covered to avoid interfering with the spiral printing. You can also print the version without holes and simply drill/cut your own drainage holes in the bottom after printing if you plan on growing live plants.

I've also included a 'Solid' version for standard printing, with roughly 3mm thick walls. This will be extra strong, but uses much more material, and I've found the 1mm vase mode version to be sufficient, even at this large size.

---

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab PLA Basic Gradient (Solar Breeze)](https://bit.ly/bamFIL).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_

VESUVIUS Pot 001 // Large Vase Mode Planter

VESUVIUS_001_Solid.stl

VESUVIUS_001_1mmVasemode_wHoles.stl

VESUVIUS_001_Solid_wHoles.stl

This modern and creative planter pot is designed to offer a unique decorative piece that combines aesthetics, functionality, and flawless 3D printing. Its geometry has been carefully optimized for support-free FDM printing, guaranteeing a fast, clean, and efficient process on any home 3D printer.
Perfect for succulents, small plants, or as a decorative piece, this design adds a distinctive and contemporary touch to any room. Ideal for makers, design enthusiasts, and collectors of high-quality 3D models.

Chinese Food Box Pot

ChineseFoodBoxScaled.stl

**Design Concept**
The design draws inspiration from fantasy themes, blending artistic elements with functionality. The deer are depicted in intricate detail with swirling design patterns around the body and antlers.


A beautifully designed deer planter 3D model. Perfect for home decor or as a unique gift. Compatible with Blender and ready for 3D printing.


**Suggested uses**

* Small succulent planter (use a liner for water)

* Desk decor centerpiece

* Pen or clip holder

* Trinket dish for rings and keys

* Shelf or tabletop decoration

* Gift for deer and nature lovers

* Dice tray or gaming table prop

* Candy bowl (with a safe insert)


**Applications**
Designed primarily as a planter, these pieces can also serve decorative purposes indoors. They elevate the aesthetic vibe of any home with their unique and imaginative structure.

**Printing Recommendations**
Use high-resolution settings to capture the fine details, especially around the antlers and leaf patterns. Consider using a mix of filament finishes, such as metallic, for added visual appeal.

**Assembly Instructions**
No assembly is required. Ensure the bottom is flat during printing to provide stability for planting purposes.






Deer Planter STL Fantasy Antler Bowl 3D Print.stl

The updated ITALIC V2 is an eccentric watering can featuring a playful skewed profile. The original ITALIC has been refined for improved functionality whilst maintaining the iconic shape.


**_Printing Guidelines_**

The walls of this container are 1.2 mm thick, and only the handle portion is solid. I suggest printing with a high wall count (5+) to ensure that the thin handle won't snap off.  You also need to ensure that your printer can create watertight models, otherwise this won't be quite as useful.

My settings:
- 0.16 mm layer height
-5 perimeters
- 20% Gyroid infill
- 10mm brim (or use the 'wBrim' version)

Download includes a 'wBrim' version with minimal supports since the handle is unsupported for much of the print, as well as a version of just the watering can. I managed printing the unsupported version with a 10mm brim, using ASA.


---

Photographed model was printed using [QIDI ASA Green](https://qidi3d.com/products/qidi-asa-filament?variant=41725687496844&sca_ref=6089281.BQS8d0sJuF) ([Amazon](https://amzn.to/3HK5pK6)) on the [Qidi Plus4 3D Printer](https://qidi3d.com/products/plus4-3d-printer?sca_ref=6089281.BQS8d0sJuF) (Also [on Amazon](https://amzn.to/4jON7VK)). 

ITALIC V2 Watering Can

ITALIC_V2_wBrim.stl

I designed this little UFO as a playful way to display small plants or dried flowers (but really, it works for just about anything. Crystals, keepsakes, tiny trinkets, or weird little guys) anything you want to give a moment in the spotlight. It’s part vase, part planter, part display stand, and just the right amount of out there.

**This design works with both AMS and non-AMS printers, it's flexible and easy to assemble!**

**Print settings for the vessel if using it as a planter:**
- Suggest a brim
- No support needed
- 15% infill
- 4 walls
- Top shell: 7 layers
- Bottom shell: 7 layers
- 0.4mm nozzle
- 0.2mm layer height

**Print settings for transparent parts like the windows:**
- Suggest a brim
- No support needed
- 100% infill
- 2-3 walls
- 0.4mm nozzle
- 0.2mm layer height

**Print settings for everything else:**
- Suggest a brim
- Support needed for bottom of ship
- 15% infill
- 2-3 walls
- 0.4mm nozzle
- 0.2mm layer height

**Use 3MF file if you want to see the printing orientations**

**PLA Used:**
- Transparent Neon: https://www.matterhackers.com/store/l/pro-series-pla/sk/MRP7Y07L?aff=7646
- Vivid Tangerine: https://amzn.to/42Towtk
- Transparent Blue: https://www.matterhackers.com/store/l/pro-series-pla/sk/M3PUVADS?aff=7646
- Sage Green: https://www.hatchbox3d.com/products/hb-pla-1kg1-75-sgrn

**Assembly:** https://youtu.be/_-W_iHPZOhE



Kitsch UFO Vase – Retro Planter for Dried Flowers, Crystals, Trinkets | Quirky Sci-Fi Home Decor

pixelandpapier__ufo_vessel__window_trim.stl

V2 of my square pot mold, makes a 3"x3"x4" tall pot, use it for succulents or store some napkins or similar. I used it to make table pots for a customers restaurant. Does require clamps and some 1/4" or 5mm bolts for the base. One of the center sections is designed to thread a 5/8" bolt into it this makes removing the center puck so much easeir.

Cement concrete resign plaster pot mold square V2 

center.obj

[_**V2 is now available HERE**_](https://than.gs/m/1377006?affiliateCode=MAKE)

ITALIC is an eccentric watering can featuring a playful skewed profile. The enclosed container is filled through an opening in the top of the handle, which can also be covered with your thumb while pouring to regulate flow. Like any good fancy designer product, it's slightly awkward to hold. How will you pick it up? :P

**_Printing Guidelines_**

The walls of this container are 1.2 mm thick, and only the handle portion is solid. I suggest printing with a high wall count (5+) to ensure that the thin handle won't snap off.  You also need to ensure that your printer can create watertight models, otherwise this won't be quite as useful. I used default print settings on my Bambu Lab X1-Carbon with ABS and it worked out!

Download includes a version with minimal supports since the handle is unsupported for much of the print, as well as a version of just the watering can. In either case, I would suggest a substantial brim to help with bed adhesion. 

--- 

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab Mint ABS](https://bit.ly/bamFIL).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_


ITALIC (V1) Watering Can

ITALIC_can_supported.stl

This planter, specifically crafted for indoor plants, can be printed in any color to complement your decoration. 
It has a hidden saucer (water dropper) that can easily be removed. All parts are printed in one go. 
Doesn't need supports  in printing and can be scaled. The design lends itself well to being printed itself well to being printed with PLA. 

Should you encounter any difficulties, don't hesitate to reach out via message - support is just a click away. 
Visit thangs.com for detailed visuals of this masterpiece, available in our "3D Printers/All" category. 

**Printing details: **

Print in place
Scalable
No support needed
Best with PLA

If you have any problem with this, message me anytime.

Planter - THE LATTICE

vase x v1.stl

Pillow Vase Mod 4

This beautifully designed vase series mimic an inflated pillow or balloon. Each shows of the small details of movement that would look beautiful as decor on your desk at work or your table at home. They would make an excellent gift or personal pen holder. 

Make sure to check out the other vases in this collection! 

Private Use Only.
Become a **Maker Member** for unlimited downloads or become a **MERCHANT MEMBER** for commercial use. 

Members get priority recommendations and customization. We would love for you to join!
Make sure to like and follow. Post your make so we can see!


Pillow Vase Mod 4

Pillow Vase 4.stl

Pillow Vase Mod 1

This beautifully designed vase series mimic an inflated pillow or balloon. Each shows of the small details of movement that would look beautiful as decor on your desk at work or your table at home. They would make an excellent gift or personal pen holder. 

Make sure to check out the other vases in this collection! 
**Private Use Only.
Become a Maker Member for unlimited downloads or become a MERCHANT MEMBER for commercial use. **
Members get priority recommendations and customization. We would love for you to join!
Make sure to like and follow. Post your make so we can see!

Pillow Vase / Planter Mod 1

pillow vase.stl

This latest addition to the **VESUVIUS Collection**, is a small cylindrical pot/container featuring the same dense herringbone ribs that increase part strength while creating a dramatic form.

VESUVIUS 003 is 50 mm tall and 94 mm in diameter. This was designed for use with my [140 mm Floating Drip Tray](https://than.gs/m/1036823?affiliateCode=MAKE) to catch excess water runoff.

**_Printing Guidelines_**

The **VESUVIUS** series of prints are designed to be printed in vase/spiral mode in your slicer. For full scale I suggest printing VESUVIUS 003 with a **0.8 mm nozzle width** (even with a 0.4mm nozzle) and 1.2mm of solid bottom layers. No top layers. **Make sure your slicer is not set to close small gaps.** In BambuStudio I set the _'Slice gap closing radius'_ to 0 mm

For the 'wHole' version of the vase mode print, use the maximum number of solid bottom layers before the holes are covered to avoid interfering with the spiral printing. You can also print the version without holes and simply drill/cut your own drainage holes in the bottom after printing if you plan on growing live plants.

I've also included a 'Solid' version for standard printing, with roughly 1.2mm thick walls. This will be extra strong, but uses much more material, and I've found the vase mode version to be preferable.

---

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Fillamentum PLA Extrafill Sky Blue and Signal Red](https://bit.ly/FM-xtra) (also at [MatterHackers](https://bit.ly/xtrafill)).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_

VESUVIUS Pot 003 // Small Cylinder Vase Mode Planter

VESUVIUS_003_1.2mmSolid_wHoles.stl

7 years after releasing my most popular 3D model, here is the newly redesigned KROMATIK vase! This version has been refined for cleaner printing and overall finesse.

The KROMATIK Collection features sweeping angular channels that capture the surrounding light, shadow, and colors in a striking manner. This reflection grounds the pieces within their environment while their dramatic forms make them stand out.

KROMATIK 002 was designed for printing in 'vase mode'. When printing at 100% scale I recommend a 0.8 mm extrusion width and 5-10 solid bottom layers for a strong and watertight model. Of course you're always encouraged to experiment with scale and settings... you may discover something special! 

There is also a hollowed version with 1.2 mm wall thickness for standard printing.

---

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab PLA Marble filament](https://bit.ly/bamFIL).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_1. 

KROMATIK Vase 002

KROMATIK_002_vase.stl

The **PLEATS Collection** mimics beautiful origami pleats that are simple but impressive in their repetition.  PLEATS 001 is 149 mm tall with a 149 mm opening and a 100 mm base. It can be scaled up and down to suit your plant or another purpose.

This pot includes a drainage hole on the bottom for growing live plants and pairs well with my [200 mm Floating Drip Tray](https://than.gs/m/1027158?affiliateCode=MAKE) to allow for excess runoff.


**_Printing Guidelines_**

The **PLEATS** series of prints are designed to be printed in vase/spiral mode in your slicer. For full scale I suggest printing with a **0.8 mm nozzle width** (even with a 0.4mm nozzle) and 1.2mm of solid bottom layers. No top layers. 

For the 'wHole' version of the vase mode print, use the maximum number of solid bottom layers before the holes are covered to avoid interfering with the spiral printing. You can also print the version without holes and simply drill/cut your own drainage holes in the bottom after printing if you plan on growing live plants.

I've also included a 'Solid' version for standard printing, with 1mm thick walls. I've found the vase mode version to work well, but certain printers and situations may benefit from the solid version (eg. resin printing).

---

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Fillamentum PLA Extrafill Sky Blue and Signal Red](https://bit.ly/FM-xtra) (also at [MatterHackers](https://bit.ly/xtrafill)).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_

PLEATS Pot 001

PLEATS_001_wHoles.stl

MERIDIAN 001 is a lovely stout pot divided through the center. Pair the design with a filament swap for a striking piece that will surely make both you and your plants happy. BONUS: You can always use these pots as containers for other purposes. Scale as you wish to suit your needs :)

This pot includes a drainage hole on the bottom for growing live plants and pairs well with my [200 mm Floating Drip Tray](https://than.gs/m/1027158?affiliateCode=MAKE) to allow for excess runoff.

There was initially a glitch exporting the STL which caused some extra artifacts on the bottom half of the photographed model. I've since fixed that, but included _'MERIDIAN_001_old.stl'_ as well in case you like that look.

**_Printing Guidelines_**
Default print settings should work fine, though you may want to increase wall/shell count to help with water tightness. I used 3 shells, 8 solid top layers, and 15% gyroid infill at 0.16 mm layer height.

--- 

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab Matte PLA filament](https://bit.ly/bamFIL) (and translucent PETG for the top half of the scaled down example).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_


MERIDIAN Pot 001

MERIDIAN_001.stl

Looking for a unique and eye-catching 3D model? Check out the visually intimidating yet fully functional Tank Tread Cannon Beer Can Holder, an effective solution to prevent anyone from touching your beer. Awesomely designed by CL3D PRINTING, this 3D model elegantly unites aesthetics of a standard Navy CIWS Gatling gun and a tank, ensuring it stands out, be it at a party or on your office desk. The detailed design is impressive, and the model comfortably holds a standard 12-ounce can. Whether for holding your beer or just to stop co-workers from stealing your pens, this model makes a statement. The model is easy to print, without support if your printer is finely tuned. If not, simply add some support to the treads' underside at the front and back, and underneath the koozie section. 

Provide safety to your beer with some firepower with this 3D model - The Tank Tread Cannon Beer Can Holder.

Planter

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Elegant Deer Planter Sculpture for Home Decor.stl

Lord of the Rings - Hobbiton Bonsai Terrarium Pot

Faces of Death - Vase Mode Pendant Light, Bambu 3MF

Pillow Vase / Planter Mod 2

VESUVIUS Pot 001 // Large Vase Mode Planter

Chinese Food Box Pot

Deer Planter STL Fantasy Antler Bowl 3D Print.stl

ITALIC V2 Watering Can

Kitsch UFO Vase – Retro Planter for Dried Flowers, Crystals, Trinkets | Quirky Sci-Fi Home Decor

Cement concrete resign plaster pot mold square V2

Planter - THE LATTICE

Pillow Vase Mod 4

Pillow Vase / Planter Mod 1

Tank Tread Cannon Beer Can Holder