We are introducing a new version of the toilet paper hanger for the bathroom.
Funny EASTER EGG CHICK makes kids and adults laugh.
It slide down as the radius of the roll decreases.
VIDEO: https://youtube.com/shorts/xXirTE82kcc?si=w69ggd0nU6Leo14c

The body matches to the hanger and stick from the Heart and Poop version, so you can change them:
HEART - https://than.gs/m/1005944
POOP - https://than.gs/m/1014983

To be printed in FDM. All the files as well as 3mf file for Bambu printers are available for this design.
We attached assembly instructions to the files.

The set includes:
hanger,
stick,
wheel,
pedals,
bodysuit,
alignment block.

Hope you guys enjoy it. Let us know your feedback.

Visit our social media:
instagram > https://www.instagram.com/effoprints
tiktok > https://www.tiktok.com/@effoprints

This model is for personal use. Before considering commercial use or sale of our designs contact us.

3D PRINTING SETTINGS
5% infill
2-3 walls
0,2 mm layer height
PLA works great.


Easter Chick Egg Riding On Toilet Paper Hanger Gadget

easter-egg-riding-set.3mf

The **PLEATS Collection** mimics beautiful origami pleats that are simple but impressive in their repetition.  PLEATS 001 is 149 mm tall with a 149 mm opening and a 100 mm base. It can be scaled up and down to suit your plant or another purpose.

This pot includes a drainage hole on the bottom for growing live plants and pairs well with my [200 mm Floating Drip Tray](https://than.gs/m/1027158?affiliateCode=MAKE) to allow for excess runoff.


**_Printing Guidelines_**

The **PLEATS** series of prints are designed to be printed in vase/spiral mode in your slicer. For full scale I suggest printing with a **0.8 mm nozzle width** (even with a 0.4mm nozzle) and 1.2mm of solid bottom layers. No top layers. 

For the 'wHole' version of the vase mode print, use the maximum number of solid bottom layers before the holes are covered to avoid interfering with the spiral printing. You can also print the version without holes and simply drill/cut your own drainage holes in the bottom after printing if you plan on growing live plants.

I've also included a 'Solid' version for standard printing, with 1mm thick walls. I've found the vase mode version to work well, but certain printers and situations may benefit from the solid version (eg. resin printing).

---

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Fillamentum PLA Extrafill Sky Blue and Signal Red](https://bit.ly/FM-xtra) (also at [MatterHackers](https://bit.ly/xtrafill)).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_

PLEATS Pot 001

PLEATS_001_wHoles.stl

We are introducing a new version of the toilet paper hanger for the bathroom.
Funny poop makes kids and adults laugh.

The body matches to the hanger and stick from the Heart version, so you can change them: https://than.gs/m/1005944


To be printed in FDM. All the files as well as 3mf file for Bambu printers are available for this design.
We attached assembly instructions to the files.

Video: https://youtube.com/shorts/fbpfDHPb71A?si=hloXOr90w_dAf4lS

Hope you guys enjoy it. Let us know your feedback.

Visit our social media:
instagram > https://www.instagram.com/effoprints
tiktok > https://www.tiktok.com/@effoprints

This model is for personal use. Before considering commercial use or sale of our designs contact us.

3D PRINTING SETTINGS
10% infill
2-3 walls
0,2 mm layer height

PLA works great.

Paper

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Easter Chick Egg Riding On Toilet Paper Hanger Gadget

PLEATS Pot 001

Poop Riding On Toilet Paper Hanger Gadget