As seen in my video about what would happen if the Moon was made of Glass! 

I needed a giant magnifying glass, and couldn't find one. So I designed one to use instead! It works pretty well and can print on a 250mm size print bed. It comes in two pieces: a handle and a lens ring. The lens ring is designed to be printed flat, just make sure it's not on the threaded side. The handle can print upwards from its base in the middle of the ring!

You'll need this 200mm fresnel lens as well. It's like 20 bucks on amazon:
https://amzn.to/3Lpy1XO

Installing the lens isn't too hard but you'll need to flex open the lens ring. It's supposed to just pop in once the print has been pulled apart enough. Be slow and careful but it shouldn't break. 



Giant Magnifying Glass!

Lens Ring.stl

TongsNow is a kitchen gadget designed to transform regular cutlery into handy tongs.

This 3D-printed accessory easily attaches to any standard cutlery, making it a versatile tool for a minimalist kitchen.

Its adaptable design allows it to fit different sizes and shapes of cutlery, making it a practical and efficient addition to any kitchen setup. Simple yet ingenious, TongsNow enhances everyday cooking experiences with a touch of creativity.

Tree supports are highly recommended
Let me know if your utensils don't fit and I can make a new version
 
Any feedback will be apricated, thank you!

TongsNow - Instant tongs anytime

TongsNow.stl

This box was born as a special collaboration between me and [3D Printing World](https://thangs.com/designer/3dprintingworld), where I sculpted the Magnolia flower on top and he designed the mechanical box.

This box is an outcome of a special request for a marriage proposal of a great member of the 3D Printing Community.
**Caleb**, the producer and costar of [HotMakes](https://youtube.com/@HotMakesLive?si=8Z-TZeVbEQwuodcW) wanted a mechanical ring box that somehow incorporates his girlfriend (now fiancés) favorite flower, the magnolia.
- - -
This type of mechanism **3D Printing World** created is perfect for a magnolia since the number of petals on the flower line up perfectly with 60 degrees.
Each of the six petals on top are connected to an outside ring gear and an inside torsion loaded spring gear.
When you hold the box and rotate the ring gear the pedals open. When you let go of the gear, the spring loaded gear forces the pedals to come together.

_**The bottom of the box prints in place.**
Use a .4mm nozzle and .2mm layer heights or smaller. You will need to print three double pedals and three single pedals. You will also want to print the shim which will help to glue the pedals squarely onto the shafts. None of the parts require supports. **There is also 3MF files for dual color pedals.**_

_The top petals glue onto locators on the top of each shaft to glue it together.
Make sure you alternate between single and double pedals.
**See the assembly video for assembly instructions.**_
- - -
Much thanks to **3D Printing World** for creating this brilliant and magical mechanism that makes the box so unique, without which the magic would not have been possible.
You can also download these files from **3D Printing World**. Please support him [here](https://than.gs/u/35786?plans=true)
- - -

**If you have any questions or inquieries about the files, if you have any suggestions and requests, or anything else, please don't hesitate to let me know!**

- - -

Please don't be shy and upload your make!

(_If you share it on your socials, please be sure to tag : @randomizy.3d [FB / IG] ; @randomizy3d [Twitter / Tik Tok] so that I can see it!_)

- - -
**Check out the amazing 3D Printing World profile here**: https://than.gs/u/35786
- - -

**INSTAGRAM:** https://www.instagram.com/randomizy.3d/

**TWITTER:** https://twitter.com/Randomizy3D

**FACEBOOK:** https://www.facebook.com/randomizy.3D

**Check More Here:** https://linktr.ee/Randomizy

- - -
_If you like my work and would like to support me so that I can bring you new content, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please do consider joining my Membership here:_ https://than.gs/u/296962?plans=true

Magnolia Box

TOP-2.stl

Magnolia Box (3 colors) (2 plates).3mf

**🛠 Customizable in Your Browser **

Adjust size, height, clearance, and more so it prints exactly how you need.  
Customize it on the Lunar Prototypes website. No slicer hacks or CAD required.

[Build Your Version Now](https://lunarprototypes.com/catalog/tools-repair/towel-holder.html)

See below for more details

&nbsp;
&nbsp;

---

**Printing Tips**
Printing Technology: FDM
Layer Height: 0.2 mm
Perimeters: 4
Infill: 10%
Infill Pattern: Gyroid
Recommended Material: PLA, PETG, ABS
Supports: Yes
Support Type: Tree

Notes:
- Supports not required but definitely recommended
- Stock design incorporates 18mm x 3mm magnets.

&nbsp;
&nbsp;

---

**Assembly Instructions**
Materials Needed: 
7x 18mm x 3mm magnets


Instructions:
1. Slice with a color change at layer 20 (assuming suggested layer height)
2. Insert magnets and resume printing.
 
&nbsp;
&nbsp;

---

**Customization Instructions:**

Customize your Customizable Magnetic Towel Holder directly on the Lunar Prototypes website:

[Customizable Magnetic Towel Holder](https://lunarprototypes.com/catalog/tools-repair/towel-holder.html)
 

**Navigate:** Go to the customization tab.
**Customize:** Enter your desired measurements and specific adjustments.
**Submit:** Click submit and wait for design to be complete.

Note: The customization system is currently in beta. We are actively refining it, and your feedback is crucial for our enhancements.

&nbsp;
&nbsp;

---

**Want to see more like this?**
Follow [@LunarPrototypes](https://www.instagram.com/lunarprototypes/) on Instagram for new releases and behind-the-scenes projects.

Got a feature idea or found a bug? Join the [Discord](https://discord.gg/RdCvuQZbSj) to help shape the next update.

Like what we’re doing? Support the project on [Patreon](https://patreon.com/LunarPrototypes)—even free members get early previews and project updates.

Towel Hanger

Towel Hanger.3mf

Cute Hello Kitty–inspired tissue box designed as a playful home accessory and desk organizer. 3D printed from matte plastic, this pink tissue holder features soft rounded edges, an iconic bow detail, and subtle face elements that instantly bring a cozy, kawaii vibe to any space.

The clean rectangular shape keeps it practical and easy to use, while the decorative details turn a simple everyday object into a charming decor piece. Perfect for bedrooms, kids’ rooms, home offices, beauty corners, or gift ideas for fans of cute and pastel aesthetics. Lightweight yet sturdy, it fits standard tissue packs and adds a gentle pop of color without feeling overwhelming.

A functional decor item that blends usefulness with playful character design.

Hello Kitty Tissue Box – Cute Pink Tissue Holder for Desk & Home

box.stl

This washi tape tool features a straight edge, zig zag edge, and arrows/chevrons to tear your washi tape into nice shapes! See the photo for examples of combinations you can mix and match to create fun washi tape designs!

👀 **See it in action:**
https://youtube.com/shorts/bCoseiuAyY8?feature=share

**For more washi tape tools, accessories, and supplies:**
https://www.karenchaudesigns.com/3d/6

**Like this? Follow me! 💖**

Washi tape tool | Tear your washi tape into fun shapes!

This washi tape tool features a straight edge, zig zag edge, and arrows/chevrons to tear your washi tape into nice shapes! See the photo for examples of combinations you can mix and match to create fun washi tape designs!

Demo: https://youtube.com/shorts/x9BTFuRO6GQ?feature=share

Some bead kits I purchased came with short beading needles which are helpful for smaller beads, but they weren't the best for making beaded jewelry with my Friendship Bracelet Making Tools, so I designed this!

Works great with pony beads! 
Recommended to use with the [Friendship Bracelet Making Tool](https://than.gs/m/936544)

---

Print settings:
- 0.2mm layer height
- I sliced it with seams on the back (i.e. at the tip of the Beedle)

✨If you like what I do✨
- Follow me for more crafting-related 3D models!
- Like, comment, share
- Post your makes – I love to see the different filament choices!
- Follow me on social media for updates and more content ([Twitter](https://twitter.com/karenchau_x), [Instagram](https://www.instagram.com/karenchaudesigns), [YouTube](https://www.youtube.com/@karenchaudesigns))
- [Become a member](https://thangs.com/designer/karenchaudesigns?plans=true) or leave me a [tip](https://ko-fi.com/karenchaudesigns) to support my design work

Thanks for stopping by!

PRACTICAL

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Giant Magnifying Glass!

TongsNow - Instant tongs anytime

Magnolia Box