Perla | Vase

Vase model Perla.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (perla.stl) modifying in the shell section of the slicer the following parameters:
- Top layers: 0
- Bottom Layers: 5 (minimum)
- Wall line count: 3 (you can increase it if you want thicker walls)

Or simply (and recommended) use the vase mode.

(Recommended layer height of around 0.2 mm
PLA matt white or light grey)

Fumarola | Vase

Vase model Fumarola.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (fumarola.stl) by modifying the following parameters in the shell section of the slicer:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (you can increase it if you want thicker walls)

Or simply (and recommended) use the vase mode.

(Recommended layer height of about 0.2 mm and matte red PLA)

Uvas | Vase

Vase model Uvas.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (uvas.stl) modifying in the shell section of the slicer the following parameters:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (can be increased if you want thicker walls)

(Recommended layer height of about 0.2 mm and purple matte PLA)

Raices | Vase

Vase model Raíces.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (raices.stl) modifying in the shell section of the slicer the following parameters:
- Top layers: 0
- Bottom Layers: 5 (minimum)
- Wall line count: 3 (you can increase it if you want thicker walls)

Or simply (and recommended) use the vase mode.

(Recommended layer height of about 0.2 mm and green matte PLA)

Redvelvet | Vase

Red Velvet vase.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (redvelvet.stl) modifying in the shell section of the slicer the following parameters:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (can be increased if you want thicker walls)

(Recommended layer height of about 0.2 mm and red matte PLA)

Dama | Vase

Vase model Dama.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model by modifying the following parameters in the shell section of the slicer:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (you can increase it if you want thicker walls)

(Recommended layer height of about 0.2 mm and PLA matte lady)

Girasol | Vase

Sunflower vase.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (girasol.stl) modifying in the shell section of the slicer the following parameters:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (you can increase it if you want thicker walls)

(Recommended layer height of about 0.2 mm and orange matte PLA)

Anima | Vase

Vase model Ánima.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (anima.stl) by modifying the following parameters in the shell section of the slicer:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (can be increased if you want thicker walls)

Or simply (and recommended) use the vase mode.

(Recommended layer height of about 0.2 mm and matte black PLA)

PLANTER

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Perla | Vase

Fumarola | Vase

Uvas | Vase

Raices | Vase

Redvelvet | Vase

Dama | Vase

Girasol | Vase

Anima | Vase

Volcanic Stone Planter.3mf

Cute Triceratops Dinosaur Planter 3D Print File

Mountain Cave Planter 3D Print File

Para Vase

Modern Spiral Ridge Vase

Chronos Radial Planter.3mf

Raven Planter Pot – Gothic Bird Plant Holder

Modern Ribbed Cylindrical Planter & Desk Organizer - Terracotta Style

Cute Dinosaur Planter and Organizer

Flame Vase

Aegis Sci-Fi Habitat Cachepot

3D printed vase -005 Hydro 0.8mm