This anatomically correct jawbone has print-in-place teeth that snap loose and wiggle around in their sockets. 
 
Halloween prop? DIY dentistry training? I don’t know what you’re going to do with this, and I don’t want to know.

See here for video: https://youtu.be/BcYYnD_sZV8 

The “Loose Teeth Anatomical” file contains the full jawbone. You’ll need to raise the object off the build plate and build supports up to it to get a nice print of the bottom contours.

The “Loose Teeth Flat Bottom” file is easier to print but less anatomically accurate.

The teeth print on tiny little rootlet supports within the sockets. Let the print cool first, and then snap the teeth loose. The teeth will wiggle and rotate but are held in place within the sockets.


Loose Teeth

Loose Teeth Anatomical.stl

Need a place to display all those cavity-causing sweets? This whimsical Tooth Dish sculpture was made from the teeth of the person who had “just one more.” 
 
Clean it with your usual dental hygiene products.

See here for video: https://youtu.be/t_a1VW46E3E 


Tooth Dish

Need a place to display all those cavity-causing sweets? This whimsical Tooth Dish sculpture was made from the teeth of the person who had “just one more.” 

Clean it with your usual dental hygiene products.

See here for video: https://youtu.be/t_a1VW46E3E 


A selection of quirky containers made with “coiled toothpaste.” If your bathroom countertop is messy enough, these will fit right in!
 
See here for video: https://youtu.be/4DPFtn_Np7Q

Download the full set:
Toothpaste Container Small: https://than.gs/m/838066 
Toothpaste Soap Dish: https://than.gs/m/838068 
Toothpaste Container Tall: https://than.gs/m/838069 


Files are provided for dual or multicolor printing only.

Perhaps one day we’ll have printers that print directly with toothpaste?


Toothpaste Container Tall

Toothpaste Container Tall - Core.stl

A selection of quirky containers made with “coiled toothpaste.” If your bathroom countertop is messy enough, these will fit right in!

See here for video: https://youtu.be/4DPFtn_Np7Q

Download the full set:
Toothpaste Container Small: https://than.gs/m/838066 
Toothpaste Soap Dish: https://than.gs/m/838068 
Toothpaste Container Tall: https://than.gs/m/838069 


Files are provided for dual or multicolor printing only.

Perhaps one day we’ll have printers that print directly with toothpaste?


Toothpaste Soap Dish

Toothpaste Soap Dish - Core.stl

Toothpaste Container Small

Toothpaste Container Small - Core.stl

**PRIVATE USE ONLY**⚠️ 

Hi I'm Kelly! 👋 I'm a dog mom and aspiring 3D designer! These files are my intellectual property and the files **CANNOT** be shared, remixed or sold in any way. A **Commercial License is Required** to legally sell physical prints of my designs. 👉[HERE](https://pawpularprints.com/pages/licensing) is a link to my commercial license options!

---
**DESIGN DESCRIPTION**🦷🧚🪥

Hi! Today we have another Freebie! This freebie is for those in the dental field who might be looking for a fun teeth themed fidget! I kept this one pretty simple and this pack contains a blank tooth and toothpaste clicker! We'll be adding a few faces and fun bases to go along with this pack in a supporter exclusive coming soon!

**⚠️LICENSE⚠️ This design is 100% FREE to print for personal use but the commercial rights are only available to active subscribers.** 

This pack contains 3 unique base designs and 3 cap designs. Each base comes in the standard 7mm, 3.5mm diameter and blank keychain configuration.

---
**CLICKER INFORMATION**ℹ️

Like most of my designs, this is a clicky design that requires a mechanical keyboard switch to make the clicky part. These models feature a universal base design which has been tested with many keyboard switches and 99% of them work!  I have an up to date list of verified clickers with links you can find [HERE](https://than.gs/p/249554). This design should be compatible with most MX style keyboard switches, however, the two metal contacts on the bottom of the switch must be clipped off flush (or folded over) to ensure the switch seats properly in the base _(this is a destructive process)_.

---
**LICENSING**⚠️

This is a **PRIVATE USE ONLY** license.

Commercial License available 👉[HERE](https://pawpularprints.com/pages/licensing)

Sharing, sub-licensing, selling, renting, hosting, transferring, distributing, modifying, or remixing of any of the digital files contained in this design is **NOT ALLOWED**. 

---
**PHOTO COLORS**🎨

- White - Elegoo White PLA
- Blue - Overture Digital Blue PLA
- Green - Elegoo Sea Green PLA

---
**3D PRINT SETTINGS**⚙️

Layer Height: 0.2mm *(recommended)*
External Perimeter: 0.33mm *(recommended)*
Scale: 100% *(Everything is modeled with tight tolerances and should not need to be resized)*
Orientation: Print the caps face down so you have a smooth surface for clicking! (recommended for flat)

NOTE: I've found the best way to get the most crisp details on these clickers is to start with the smallest details first and work up from there. Here is the order I recommend after LOTS of trial and error:

- Small Detail
- Everything Else (Base Colors)

I've also found hitting the print with a heat gun right before the main body color starts printing will eliminate any little strings that can cause blemishes on the final design (flat designs ONLY)

⚠️WARNING⚠️ - This pack requires very good bed adhesion to ensure the best possible results for your finished clicker. It is recommended to clean your bed with soap and water before printing or whatever your specific printer manufacturer recommends for a deep bed clean!

---
*Stay Pawsitive!* 🐾
  
For model help or other questions, please contact us at *support@pawpularprints.com*

Tooth Treat

Caps and Bases - Tooth Treat.3mf

💰 Looking to sell physical prints? Our unbranded models and editable CAD files make it easy to create, customize, and launch your own branded products. Join our network of vendors through one of our [**Commercial Membership options**](https://than.gs/u/2998597?plans=true).

---

🪥 **The 3dponto Toothbrush Holder offers a functional and easy-to-clean solution for organizing your toothbrushes and toothpaste.** ⭐

The model’s thoughtfully designed geometric structure features side openings and angled surfaces, making cleaning and maintenance effortless. With easy access to the bottom, any residue or water buildup can be quickly washed away.

Printing this model is hassle-free—it requires **no supports** for standard setups. However, for optimal results and to handle the overhangs at the top, we recommend using **organic tree supports**. This versatile organizer is perfect for keeping your bathroom essentials in one place and minimize your cleaning efforts.

**Features:**

- **Washable Design**: Open sides and angles provide easy access for thorough cleaning.
- **Compact Capacity**: Fits up to 4 toothbrushes or a mix of small bathroom items.
- **Easy to Print**: No supports needed, but organic tree supports are recommended for improved print quality.
- **Stylish Look**: Sleek, geometric aesthetic enhances bathroom organization.

**Recommended Printing Settings:**

- Organic tree supports
- 0.2mm layer height
- 80-100mm/s speeds
- 5%-15% infill
- No build plate adhesion required

**❓ Have questions or need support? Feel free to send us a message directly!**

🔗 Follow us for more designs and stay updated with our latest releases.

**👍 Liked this design? Check out our other models on our profile!**

Toothbrush Holder

3dponto_Toothbrush_Holder.stl

3dponto_Toothbrush_Holder_V1.stl

**Toiletry Holder**
Your one stop shop for a bathroom toiletry organizer! This holder was designer to store your toothbrush, toothpaste, floss, and qtips for you ear swapping lovers. 

**Printer Settings**
PLA, 0.12mm layer height, 15% infill

Feedback appreciated.

Custom-Designed Countertop Toiletry Holder

ToiletryContainer.stl

Oral-B Wall Holder/Mount only one screws required, as you can see on the picture.
But I think you can put double-sided tape or you can use with hot glue, I didn't try it.
Maybe you can use with braun toothbrush.

I would be happy if you look at the links below:
Instagram: https://www.instagram.com/a_ilterish/
Cults3D: https://cults3d.com/en/users/A_ilterish/3d-models
Printables: https://www.printables.com/@ilterish_843470/models
MakerWorld: https://makerworld.com/en/@A.ilterish
MakerOnline: https://bit.ly/Makeronline


Oral & Dental Care

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Loose Teeth

Tooth Dish

Toothpaste Container Tall