Holiday Kiss Cookie Ornaments

KissCookie1STL-FunFam3D.stl

Flowery Whatsit Ornament Suncatcher

*What is it?*
This is part of a series of designs that were originally intended as Christmas tree ornaments and I later found also made great suncatchers for any time of year (when printed with transparent filament/resin). This is the second in the series to be published.

Beyond that, what is it? Well, it's kind of a snowflake pattern (5 points instead of 6), kind of a star, kind of flowery, and bears a large resemblance to gothic architecture. Mostly, it's just a cool geometric design that I enjoy looking at.

*How to Hang it*
I've included two small, well hidden loops behind one of the arms so you can tie coat thread on them and hang it up. See the detail photo included above. They are really small and very well hidden.

**Print Settings**
You shouldn't need a raft or brim. 

*Print Time*
Depending on the wall thickness, these printed in 2-3 hours for me.

*Thickness*
If you want to use these as Christmas ornaments, I recommend trying to print this with 1 line (0.4mm) walls. As a suncatcher, it looks good with 1 or 2 line walls (I prefer 2). I needed to make the walls with 2 lines (0.8mm) to get a good print from the TTYT3D Silky Orange. I set the top/bottom thickness to 0.3mm.

You probably have your printer set up to print 1.2mm walls and top/bottom thickness. Don't use those settings for this design unless you plan to use it as a paperweight. If you forget to change them, cancel the print and start over.

*Flow*
I increased the flow to 110% for the outer walls and 105% for the inner.

*Infill*
This doesn't need any infill. Seriously. Don't add it unless you want to use this as a paperweight.

*Speed*
I print the first layer at 18mm/second. That makes sure that the complicated design gets good bed adhesion without a raft or brim. It also adds less time to the print and less clean-up than using a raft or a brim. If you have a cold bed, you might need the raft or brim anyway.

For all other layers, I use:
* 30mm/second outer wall speed
* 40mm/second inner wall speed
* 60mm/second overall speed

Swoop 1 Christmas Stretch Ornament 2024

Stretch Swoop 1 Whole v2.stl

Graduation Ornament

Graduation Piece 1.stl

Decorative Egg Ornament

egg ornament bottom.stl

GRIM REAPER GNOME - GNOME GRIM REAPER OF TIME

Body.stl

George the Pig Ornament

BOB_George_The_Pig_Ornament.stl

Swoop 1 Christmas Bulb 2024

Bulb Swoop 1 Final.stl

Demented Tomato 

Demented tomato.stl

Blokkheadz Heat Miser - Magnet, Ornament and Regular Collectible

Blokkheadz Heat Miser - Beige.stl

(Italian) Apulian Pumo (4)

Apulian Pumo (4).stl

Poke Bauble

dome-top-red.stl

Snowflake Ornaments

Snowflake Ornaments Plated.3mf

Ornamental Bauble 2022 (#5)

Ornamental Bauble 2022 (5).stl

Snowflake Ornament.stl

Tis the season to 3D print this decorative tree ornament. Mesh down onto build plate and will use minimal tree supports to prevent sphere from falling off build plate.

ORNAMENT

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Holiday Kiss Cookie Ornaments

Flowery Whatsit Ornament Suncatcher

Swoop 1 Christmas Stretch Ornament 2024

Graduation Ornament

Decorative Egg Ornament

GRIM REAPER GNOME - GNOME GRIM REAPER OF TIME

George the Pig Ornament

Swoop 1 Christmas Bulb 2024

Demented Tomato

Blokkheadz Heat Miser - Magnet, Ornament and Regular Collectible

(Italian) Apulian Pumo (4)

Poke Bauble

Snowflake Ornaments

Ornamental Bauble 2022 (#5)

Snowflake Ornament.stl

Gingerbread Cookie Ornaments Set 6

Patronus Ornament

Penguin Baking 3 of 12 Ornament

Gingerbread People Ornament Set

Ribbed Pumkin