This little fruit sando isn’t for eating, it’s for fidgeting. Each slice is filled with satisfying clicky fruit layers like orange, strawberry, and kiwi. Whether you're a fake food lover or just need a little something to keep your hands busy, this sando adds a little bit of joy to your day. It even comes with a keychain, so you can bring it wherever you go!

**This design works with both AMS and non-AMS printers and easy to assemble!**

**_Important Note: Not suitable for young children. Contains small parts that may pose a choking hazard._**

**Print Settings** 
If you'd like to see the orientation and settings of the print, please take a look at the .3mf file.
- I suggest using a brim
- Supports are needed for the bread slices
- 15% infill
- 2-3 walls
- 0.4mm nozzle
- 0.2mm layer height

**Items Used:**
- Matte Orange: https://amzn.to/3YhBrT5
- Vivid Tangerine: https://amzn.to/42Towtk
- Jelly Red: https://amzn.to/4jlO34i
- Black: https://amzn.to/4olVBaf
- Applesauce: https://amzn.to/3RmjTBw
- Guacamole Green: https://amzn.to/3FOSEND
- White: https://amzn.to/3CbNBFa
- Kailh Jade Switch: https://amzn.to/3Y5lbE3

**Assembly Video:** https://youtu.be/CmzO1s_Ffys

Japanese Fruit Sando Fidget Clicker Keychain - Kawaii, Fake Food, Sandwich, Fruits, Clickable, Charm

pixelandpapier__sando_clicker__AMS.3mf

Meet the Cute Fruit Container Trio. A peach, an orange, and a honeydew melon that look like they came straight from the market, foam wrappers and all. But surprise! Each one opens up to reveal a tiny hidden compartment inside. Perfect for stashing little treasures or trinkets. They are equal parts playful and practical. Whether you display them on your desk, shelf, or gift them to a cute decor lover, these cuties are fresh picked fun.

**This design works with both AMS and non-AMS printers, it's flexible and easy to assemble!**

**Print Settings**
- Suggest using a brim for the melon stem, no brims needed otherwise
- No supports needed 
- 10% infill
- 2-3 walls
- 0.4mm nozzle
- 0.2mm layer height
- Use 3MF file if you want to use your AMS

**PLA Used:**
- Vivid Tangerine: https://amzn.to/42Towtk or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-mat-vtan
- Matte Orange: https://amzn.to/3YhBrT5 or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-mat-orn
- White: https://amzn.to/3FORvWl or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-wht
- Mint Green: https://amzn.to/4kta2Gt
- Sage Green: https://www.hatchbox3d.com/products/hb-pla-1kg1-75-sgrn
- Guacamole Green: https://amzn.to/3FOSEND or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-mat-ggrn

**Assembly Video:** https://youtu.be/a1QoTmpHslA

**Important Note: Not suitable for young children. Contains small parts that may pose a choking hazard.**

Cute Fruit Container Trio – Peach, Orange, and Melon Storage Boxes for Trinkets and Desk Decor

pixelandpapier__peach__styrofoam.stl

You get twice the fun with these two-in-one fidgets: a rotating magnetic “ratchet” fidget and a spinning top 🙌🏼

****Important:**** You will need (8) 6mm x 3mm neodymium magnets for each fidget (4 magnets for each half of a fidget)

Here is an Amazon link to the magnets and filament I used: https://amzn.to/3XA7HkC

****3D Print Settings for the Lemon & Lime Fidgets:****
0.2mm Layer Height
25% Infill
Outer Wall Speed 100mm/s
No supports needed
Outer brim on ‘peg’ piece

I have also included a 3MF file with the following print profiles:
Print plate #1 (lemon fidget): 2 colors; pause added at layer 22 (layer height 4.40mm) to insert magnets (make sure to orientate the magnets correctly - see photo)

Print plate #2 (lime fidget): 2 colors; pause added at layer 22 (layer height 4.40mm) to insert magnets (make sure to orientate the magnets correctly - see photo)

****3D Print Settings for the Orange Fidget:****
0.2mm Layer Height
25% Infill
Outer Wall Speed 100mm/s
No supports needed
Outer brim on ‘peg’ piece

I have also included a 3MF file with the following print profiles:
Print plate #1 (Orange bottom piece): 2 colors; pause added at layer 22 (layer height 4.40mm) to insert magnets (make sure to orientate the magnets correctly - see photo); variable layer height adjustment added at top of this piece (to help fidget spin better)

Print plate #2 (Orange top piece): 3 colors; pause added at layer 22 (layer height 4.40mm) to insert magnets (make sure to orientate the magnets correctly - see photo)

Print plate #3: peg piece, 1 color

To assemble insert peg into bottom of each fidget (this will be a snug fit). The top piece will fit easily over the peg so it can be removed on and off.

Have fun printing! 🍋🍊

ORANGE

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Japanese Fruit Sando Fidget Clicker Keychain - Kawaii, Fake Food, Sandwich, Fruits, Clickable, Charm

Cute Fruit Container Trio – Peach, Orange, and Melon Storage Boxes for Trinkets and Desk Decor

Clicky Citrus Spinners (2-in-1 Fidget Toys)