Meet this _Articulated Horned Dragon_ with sweet eyes! Its articulated body, from head to tail, makes it fun to play with and perfect for fidgeting. Can be printed with **separated** or **embedded** eyes.

**Model Features:**
- **No support** required
- Articulated design from head to tail
- Eyes can be printed **separately** or **attached/embedded**

**Recommended Print Settings:**
- Support: **Not required**
- Layer Height: 0.2 to 0.12mm for optimal details (we printed at **0.16mm**)
- Infill Percentage: 15% for a good balance between strength and flexibility
- Nozzle: **0.4mm** (we used this), or 0.2mm for better details

**Commercial License**
Do you want to sell prints of our models? You can purchase commercial licensing by joining the Commercial License in our Thangs3D!

Articulated Horned Dragon, Flexi Toy Print-In-Place

Horned dragon_BAMBULAB.3mf

Horned dragon_body.stl

FREE MODEL – Fan tribute (not affiliated with Nintendo)
Get ready to **SMASH** your gaming setup with this dynamic, punch-packed mini dock for the **Nintendo Switch 2**!

Inspired by the **latest Donkey Kong & Pauline amiibo**, Monkey Smash freezes the action in time: **Donkey Kong mid-punch, slamming straight into a crumbling stone wall**—right next to your dock. It’s bold, energetic, and gives your console a whole new vibe. Whether you’re deep into Donkey Kong Bananza or just love a killer display, this is made for you.

✨ **Highlights**:
•**Ultra dynamic pose**, full of motion and impact
•Designed to perfectly fit **next to the official Switch 2 dock**
•**Zero glue, zero supports, zero AMS** – just print and snap into place!
•Hand-sculpted with love – **100% original Holoprops creation**, no assets from or copied from Nintendo
•All rear cable ports (HDMI & USB-C) remain fully accessible
•Holds tight with a subtle clip that locks into one of the dock’s feet
•Comes pre-calibrated with a ready-to-go **3MF file**
•Fully compatible with most printers (see size note below)
•**Free for all Donkey Kong fans smashing through Bananza levels!**🍌

The included 3MF file is optimized for Bambu Studio. Using it in other slicers may break alignment, colors, or custom settings. Use at your own risk.

🖨️ Printing Specs:
•Nozzle: 0.4 mm
•Layer Height: 0.2 mm
•Infill Pattern: Hatch
•Infill Density: 6%
•Walls: 2
•Supports: Nope.
•Glue: Nope.
•AMS: Nope.
•Print Time: A few hours
•Beginner Friendly: Yes!

🧵 Tested print volume: minimum 15.5 x 21 x 14 cm (L x W x H)
If your printer is a bit smaller, try rotating diagonally—we can’t guarantee, but it might work!

📸 Model printed with **Polymaker PanChroma Limestone PLA** for that stone-crush look.

All Holoprops models are **100% original creations, hand-sculpted with care and creativity**.
These models are **our own intellectual property and are protected accordingly**.

Want support, inspiration, or to share your prints?
Join our [Discord](https://discord.gg/HT47N9r7Y6) server and be part of a kind and passionate creative community:
👉 [Holoprops Discord Server](https://discord.gg/HT47N9r7Y6)

This model is for **personal use only**
If you’d like **to sell 3D printed versions of this model anywhere in the world**, you must be an active member of the [Merchant Tier](https://thangs.com/designer/Holoprops/memberships) on Thangs
👉 [Holoprops’s Thangs Memberships](https://thangs.com/designer/Holoprops/memberships)

Monkey Smash – Nintendo Switch 2 Dock

Dock_Switch2-Monkey_Smash_Amiibo-Holoprops.3mf

Hi everyone!
This is my new abstract pot to give your flowers
freshness and new look.🌊💧
This pot can accommodate pots with a diameter of 10.5-11cm and a height of 12cm.

If you liked this design and would like to see more similar designs please click on the like button 💙 and write a comment📃 if you want
Thank you for downloading my design🤗😉
Happy printing!!

Nosupport

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Articulated Horned Dragon, Flexi Toy Print-In-Place