Polypanels // Quarter Flip

quarterflip-solid.stl

Mother's Day Tokens

Mother's Day Token - Breakfast in Bed

Hidden Message Easter Egg

This Easter Egg appears plain at first glance but pop a light inside or behind it and see the pictures and secret message shine through! 

Very straightforward print, just set infill to 100% to make sure the infill pattern doesn't show - no need for supports!

Polypanels // 3x2 Rectangle

3x2-square-open.stl

( Thangs Valentine’s Day Contest ) Remix of Simple Heart Box with Lid

Heart Box Lid remix.stl

Polypanels // Heptagon

heptagon-open.stl

Captain America Shield - LED strip compatible

Shield_3mf_noname.3mf

Maine Coon Cat (Commercial Use)

Mccat_head_v3.stl

Snowfall, Winter Dragon Child - Articulated Dragon Snap-Flex Fidget (Tight Joints)

Snowfall_Tight.stl

Polypanels // Pentagon Twist Container

pentagontwist-inner.stl

Magic Heart Lamp (remix)

DISPLAY ONLY.stl

Intricate Patterned Vase

Inspired by depression glass, this is an intricate but easy to print design.

It's designed to be printed in vase/spiralise mode so no supports etc. needed

Print in the photos is printed using FiloAlfa Tigre PLA

Stone Pot

stone effect pot/vase to be printed in vase/spiralise mode

Citrus Coaster

Easy to print coaster, just switch out the filament at 3.2mm and 4.2mm for the multicolour effect using a standard printer

Sleek-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget 

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.
This is the Tight tolerance model.  For the other tolerances, please check out the other versions of the model below:

Medium Tolerance Sleek-Eyed Bone Snake: Coming Soon
Loose Tolerance Sleek Eyed Bone Snake: Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Sleek-Eyed Bone Snake, be sure to check out it’s sibling Round-Eyed Bone Snake:
Tight Tolerance Round-Eyed Bone Snake: Coming Soon
Medium Tolerance Round-Eyed Bone Snake: Coming Soon
Loose Tolerance Round-Eyed Bone Snake: Coming Soon


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Sleek-Eyed Bone Snake - Articulated Snap-Flex Fidget 

Polypanels // Isosceles Triangle

isosceles-open.stl

Paperclip Flower Bookmark 4.stl

Paperclip Flower Bookmark 2.stl

Paperclip Tulip Bookmark.stl

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Loose Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

**Loose Tolerance**

The cauldron is bubbling, the potions are pouring, and this mystical kitty is up to no good.  With a twitch of its nose and a flick of its paws it weaves magical spells that defy natures laws.  

As the time slips away through a long boring day you may find that your fingers are growing quite bored.  You may reach for a widget but it doesn't quite fidget like the fun little friend in your pocket that's stored.  

So put that phone away and delightfully play with this witchy  and whiskered fun companion that can only be known by its true name alone, and that moniker is the **Witch Hat Snappy Cat**.

Witch Hat Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Loose** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Witch Hat Snappy Cat:**
https://than.gs/m/940295
**Medium Tolerance Witch Hat Snappy Cat:**
https://than.gs/m/940296

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Snappy Cat:**
https://than.gs/m/940287
**Medium Tolerance Snappy Cat:**
https://than.gs/m/940289
**Loose Tolerance Snappy Cat:**
https://than.gs/m/940290

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

No supports

Most Popular this Year

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Polypanels // Quarter Flip

Mother's Day Tokens

Hidden Message Easter Egg

Polypanels // 3x2 Rectangle

( Thangs Valentine’s Day Contest ) Remix of Simple Heart Box with Lid

Polypanels // Heptagon

Captain America Shield - LED strip compatible

Maine Coon Cat (Commercial Use)

Snowfall, Winter Dragon Child - Articulated Dragon Snap-Flex Fidget (Tight Joints)

Polypanels // Pentagon Twist Container

Magic Heart Lamp (remix)

Intricate Patterned Vase

Stone Pot

Citrus Coaster

Sleek-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget

Polypanels // Isosceles Triangle

Paperclip Flower Bookmark 4.stl

Paperclip Flower Bookmark 2.stl

Paperclip Tulip Bookmark.stl

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Loose Joints)