3D model description
Step into the shadows with this exclusive ANBU Mask Collection – six iconic designs inspired by the mysterious operatives from the Naruto universe.

Whether for cosplay, display, or collectors of anime-inspired props, these masks bring the ANBU spirit to life.
Each model is optimized for FDM 3D printing with easy scaling to fit different head sizes.

⚙️ Recommended Print Settings

File format: STL (each mask separate)
Printer volume: 220×220×250 mm or larger recommended
Layer height: 0.2 mm (0.12 mm for high detail)
Infill: 10–15% (higher for durability)
Supports: Required (mainly for eye holes & curved surfaces)
Wall thickness: 2–3 perimeters for strength
Material: PLA / PETG (PLA recommended for easy finishing)

🛠️ Manufacturing & Post-Processing Instructions

Scale the mask to fit your head (usually 90–100% for adults, 80–85% for kids).
Print flat on the back surface for best support efficiency.
After printing, sand with 220–400 grit to smooth out layer lines.
Apply primer filler before painting.
Paint base coat white → then add red details with acrylic or spray paint.
Seal with a clear matte or gloss varnish.
Attach with elastic straps or embed magnets depending on cosplay setup.

ANBU Mask Pack 2 – FOX, BLOODFANG, SPIRALFANG, RAM, SPIRAL, ONI and CUBE

Anbu Spiral Fang.stl

3D model description
Step into the shadows with this exclusive ANBU Mask Collection – six iconic designs inspired by the mysterious operatives from the Naruto universe.

This bundle includes:

Viper – sleek fangs striking down the mask.
Claw – diagonal slashes across the eyes.
Fang – twin vertical streaks for a sharp, fierce look.
Cat – feline elegance, a true hunter’s mask.
Halfmoon – mysterious one-eyed crescent design.
Whisker – playful yet deadly, with sharp whisker marks.

Whether for cosplay, display, or collectors of anime-inspired props, these masks bring the ANBU spirit to life.
Each model is optimized for FDM 3D printing with easy scaling to fit different head sizes.

⚙️ Recommended Print Settings

File format: STL (each mask separate)
Printer volume: 220×220×250 mm or larger recommended
Layer height: 0.2 mm (0.12 mm for high detail)
Infill: 10–15% (higher for durability)
Supports: Required (mainly for eye holes & curved surfaces)
Wall thickness: 2–3 perimeters for strength
Material: PLA / PETG (PLA recommended for easy finishing)

🛠️ Manufacturing & Post-Processing Instructions

Scale the mask to fit your head (usually 90–100% for adults, 80–85% for kids).
Print flat on the back surface for best support efficiency.
After printing, sand with 220–400 grit to smooth out layer lines.
Apply primer filler before painting.
Paint base coat white → then add red details with acrylic or spray paint.
Seal with a clear matte or gloss varnish.
Attach with elastic straps or embed magnets depending on cosplay setup.

Naruto

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

ANBU Mask Pack 2 – FOX, BLOODFANG, SPIRALFANG, RAM, SPIRAL, ONI and CUBE

ANBU Mask Pack 1 – Viper, Claw, Fang, Cat, Halfmoon, Whisker