5/16" Mounting Bracket, 2020 Extrusion 4 Hole

VERT-4040-.STL

5/16" Magnetic Corner Mount

MAGN-90VE-.STL

Pickleball Net Phone Holder STL

CH-5401 PART A.STL

5/16" Mounting Bracket, 2020 Extrusion 2 Hole

HORZ-4040-.STL

5/16" Freely Adjustable Coupler

COUP-45-.3125-NS.STL

5/16" Adjustable Coupler

COUP-45-.3125-N.STL

Cheese shelf bracket

Cheese_shelf.3mf

EZPZ Mini Magnet Strip // 20x65mm Rectangle

MiniMagnetStrip_20x65_TPU.stl

Mini Squiggle Magnet Strip // 2 Sizes of Wall Mounted Magnets

MiniSquiggleMagnet_30x110mm_TPU.stl

EZPZ Mini Magnet Strip Collection // 5 Rectangular Wall Mounted Magnets

MiniMagnetStrip_20x90_TPU.stl

Uppdatera Multiboard Mounting Brackets

Uppdatera Multiboard Mounting Brackets v2.3mf

EZPZ Pegboard Hook // 25mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 25mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 20mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 20mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Hook for Gymnastics Rings

32mm_ringHook.stl

EZPZ Pegboard Hook // 10mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Multiboard - Snap Improved

Multiboard Snap - Notch Liso.stl

EZPZ Pegboard Hook // 15mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 15mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Mounting

Trending this Week

Categories

Trending

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

5/16" Mounting Bracket, 2020 Extrusion 4 Hole

5/16" Magnetic Corner Mount

Pickleball Net Phone Holder STL

5/16" Mounting Bracket, 2020 Extrusion 2 Hole

5/16" Freely Adjustable Coupler

5/16" Adjustable Coupler

Cheese shelf bracket

EZPZ Mini Magnet Strip // 20x65mm Rectangle

Mini Squiggle Magnet Strip // 2 Sizes of Wall Mounted Magnets

EZPZ Mini Magnet Strip Collection // 5 Rectangular Wall Mounted Magnets

Uppdatera Multiboard Mounting Brackets

EZPZ Pegboard Hook // 25mm Reinforced Hook

EZPZ Pegboard Hook // 20mm Hook Type B

Hook for Gymnastics Rings

EZPZ Pegboard Hook // 10mm Hook Type B

Multiboard - Snap Improved

EZPZ Pegboard Hook // 15mm Reinforced Hook

Multiboard Compatible Multifunction Arm Mount

Dual - Command Strip -DS Part A.stl

Dell Optiplex Micro Form Factor Wall Mount