**Ventilated cable management – Organized power, without the mess.**

Cable clutter is one of the fastest ways to make a workspace feel chaotic. **Logical CableNest** was designed to contain power adapters and cables in a clean, breathable, and portable way.

CableNest **A** is the smallest size in the CableNest lineup and is offered as a **free starter size**. It’s ideal for compact laptop setups, single-monitor desks, or anyone wanting to try the CableNest system before scaling up.

---

## **What It Is**

CableNest is a **ventilated cable management box** that contains power adapters and excess cable length while keeping everything organized, cool, and easy to move.

Open hex-pattern walls allow heat to escape, while the enclosed form keeps cable clutter visually contained and out of the way.

---

## **How It Works**

Power adapters load through the **hinged split top**, cables route out either end, and the **ventilated walls allow heat to escape** during use.  
Once closed, everything stays organized and accessible without unplugging anything.

Because all cables and adapters are contained in a single unit, the entire setup can be picked up and moved as one.

---

## **Modular & Stackable**

CableNest can be used entirely on its own or paired with the **optional Logical DeskBox**, which is designed to sit securely on top of a matching-width CableNest.

The DeskBox adds organized storage for tools and desk accessories, while CableNest handles power and cables. Each component can also be used independently.

---

## **Size & Variants**

CableNest **A** is the smallest available width in the system and is offered as a free starter size.

All CableNest models share the same:
- **Height:** 100 mm  
- **Depth:** 160 mm  

Available widths (small → large):

- **A** – Small (this model, free starter size)  
  Width: 224 mm  
  Print bed required: 216 mm  
  Mates with DeskBox A

- **B** – Medium  
  Width: 256 mm  
  Print bed required: 248 mm  
  Mates with DeskBox B

- **C** – Large  
  Width: 288 mm  
  Print bed required: 280 mm  
  Mates with DeskBox C

- **D** – Extra Large  
  Width: 320 mm  
  Print bed required: 312 mm  
  Mates with DeskBox D

Each width has a corresponding DeskBox designed to match it.

> *Note: Images may show a representative size. Dimensions vary by model.*

---

## **Assembly & Printing**

- 100% 3D printable  
- Snap-together design  
- No hardware required  
- Assembly is identical across all sizes  

Clear assembly, disassembly, and usage diagrams are included.

---

## **Why CableNest Exists**

CableNest was designed for people who want a **clean workspace without committing to a permanent desk setup**.

By containing power and cables in a ventilated, movable box, CableNest keeps workspaces tidy while remaining flexible and easy to pack away when needed.

---


## **Related Links**
**DeskBox A**
[https://than.gs/m/1505434](https://than.gs/m/1505434)

**DeskBox B**
[https://than.gs/m/1505433](https://than.gs/m/1505433)

**DeskBox C**
[https://than.gs/m/1505432](https://than.gs/m/1505432)

**DeskBox D**
[https://than.gs/m/1505431](https://than.gs/m/1505431)

**CableNest B**
[https://than.gs/m/1505282](https://than.gs/m/1505282)

**CableNest C**
[https://than.gs/m/1505280](https://than.gs/m/1505280)

**CableNest D**
[https://than.gs/m/1505276](https://than.gs/m/1505276)

---

**Join the LogicalPlanet Discord**
[https://linktr.ee/logicalplanet](https://linktr.ee/logicalplanet)

**Visit my blog for more details and other designs**
[https://www.logicalplanet.com/](https://www.logicalplanet.com/)

**Revisions and Updates**  
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model. Please email me at logicalplanet3d@gmail.com if you would like me to make a revision or have comments about this design.


Logical CableNest A

LCN 1v00-51231a 160x100 End A.stl

Desk clutter builds up quickly — pens, earbuds, glasses, sticky notes, charging cables, and all the small items you reach for every day.

**Logical DeskBox** is a compact, modular desk organizer designed to keep everyday desk essentials neatly stored, easy to access, and simple to move when needed.

DeskBox **A** is the smallest size in the DeskBox lineup and is offered as a **free starter model**, making it an easy way to try the system and see how it fits into your workspace.

---

## **What It Is**

Logical DeskBox is a **snap-together, fully 3D-printed desk organizer** with a hinged upper tray and a main storage compartment below.

The upper tray keeps frequently used items visible and within reach, while the lower compartment stores bulkier or less frequently used desk items — all neatly contained in one compact unit.

---

## **How It Works**

The upper tray pivots open smoothly, providing access to both storage levels.  
When closed, DeskBox keeps desk essentials contained and visually tidy.

Because everything is held in a single unit, DeskBox can be easily picked up and moved without disturbing its contents — ideal for flexible or shared workspaces.

---

## **Works With Logical CableNest**

DeskBox can be used entirely on its own **or paired with a matching-width Logical CableNest**, which is designed to sit securely beneath it.

- **DeskBox** organizes everyday desk items  
- **CableNest** contains power adapters and cable clutter  

Each component also works independently, allowing you to expand your setup over time.

---

## **Size & Variants**

DeskBox **A** is the smallest width in the DeskBox system and is intended as an easy entry point.

All DeskBox models share the same:
- **Depth:** 136 mm  
- **Height:** 66 mm  

Available widths (small → large):
- **A** – Small (this free starter size)  184mm wide
- **B** – Medium  216mm wide
- **C** – Large  248mm wide
- **D** – Extra Large 280mm wide

Each DeskBox size has a corresponding CableNest designed to match it.

> *This download contains **DeskBox A only**. Other sizes are available separately.*

---

## **Printing & Assembly**

- 100% 3D printable  
- No fasteners required  
- Snap-together design  
- Designed to be disassembled if needed  
- Assembly is identical across all sizes  

Clear assembly, disassembly, and usage diagrams are included.

---

## **Why DeskBox Exists**

DeskBox was designed for people who want **intentional desk organization without committing to a permanent setup**.

DeskBox **A** makes it easy to get started — organize the essentials, try the system, and scale up if you need more storage later.

---

## **Related Links**
**DeskBox B**
[https://than.gs/m/1505433](https://than.gs/m/1505433)

**DeskBox C**
[https://than.gs/m/1505432](https://than.gs/m/1505432)

**DeskBox D**
[https://than.gs/m/1505431](https://than.gs/m/1505431)

**CableNest A**
[https://than.gs/m/1505283](https://than.gs/m/1505283)

**CableNest B**
[https://than.gs/m/1505282](https://than.gs/m/1505282)

**CableNest C**
[https://than.gs/m/1505280](https://than.gs/m/1505280)

**CableNest D**
[https://than.gs/m/1505276](https://than.gs/m/1505276)

---

**Join the LogicalPlanet Discord**
[https://linktr.ee/logicalplanet](https://linktr.ee/logicalplanet)

**Visit my blog for more details and other designs**
[https://www.logicalplanet.com/](https://www.logicalplanet.com/)

**Revisions and Updates**  
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model. Please email me at logicalplanet3d@gmail.com if you would like me to make a revision or have comments about this design.

**2026-01-25**: I originally posted this with the wrong tray STL.  The correct one is now in this download.  My apologies to all who printed the wrong one.

Modular Design

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads