hey this is totally "not" a Dreadnought from "Warhammer 40k"

  I split it up for easer support removal but the full model is there too if  you want they are already scaled for gameplay

I recommend printing these on a resin printer, but if you don't mind a lot of finicky sanding you should be able to get a decent looking result off of a fdm printer

feel free to remix and make more weapons and stuff for it

Not a Warhammer 40k Dreadnought

Dreadnought.stl

Right heavy flamer.stl

Dreadnaught-no-arms.stl

Right plasma gun.stl

A model of a Xebec sailing ship. This miniature is well suited for tabletop games such as Dungeons and Dragons.

It comes with a version on a flying stand as well as a version with its bottom cut off to make it look like it's floating in water. There are pre-supported versions of all the parts for more convenient resin printing. There are also my FDM friendly versions of some of the parts that would not otherwise be suited for FDM printing.

This is a 1:600 scale model, which is the same scale as the Spelljammer ship models made by Wizkids. The hull is about 4.5 inches (120mm) long and the stand has a base that is 2 inches (50mm) in diameter.

There is also a version of this design that includes more options for the sails as well as a flying ship hull. That is available at Cults3d Here:
https://cults3d.com/en/3d-model/game/xebec-sailing-airship-gaming-miniature-flying-ship-compatible-with-dnd-spelljammer

Follow me on Cults3d to stay notified about all of my designs as they are released.

Commission me to design custom miniatures and buy 3d prints of my designs at Etsy:
https://www.etsy.com/shop/MechatronicGames


Resin (SLA) Printing:

Use the pre-supported files with settings that work well for your resin and printer.

Filament (FDM) Printing:

I recommend printing all parts with a nozzle diameter of 0.4mm.

For printing the hull, make sure you use the FDM version. It should default to the recommended orientation with the front of the ship angled down about 30 degrees. 

Set the support overhang angle such that supports generate along the bottom of the ship but there’s little to no support up the sides. I found 60 degrees works well for this. It may also generate supports under the railing in the back of the ship. These supports are not necessary and you can use a support blocker to suppress the generation of any supports on the deck of the ship.

For the masts, use the version that isn’t pre-supported. I recommend printing with the masts oriented horizontally so they aren't too fragile. Make sure the mast is also oriented such that an edge of the sail is pointed down. The face of the sail pointing down will result in a much uglier print.


Xebec Sailing Ship Gaming Miniature Compatible with DnD Spelljammer

Xebec Ship Hull SLA.stl

Hello Tribe,

This a wargaming/ rpg play set, please enjoy scaled to 28mm heroic


Cheers
Maker Millwright


FHW: Palace set

Fhw_ Palace set v1 complete.stl

A model of the Triop Selljammer from second edition Dungeons and Dragons. This model was designed for a commission for use in a second edition Spelljammer game but it could easily be ported into fifth edition if desired. The original rules and floor plan for the Triop can be found in the Spelljammer War Captain's Companion Box Set which can be purchased at DrivethruRPG.

Files are included for two different scales. The thumbnail features the 1:600 scale version with a 2 inch base. This is the same scale as the official Spelljammer ship models sold by Wizkids. There's also a 1:900 scale version designed to match the approximate scale of the paper cutout ship miniatures that were sold with second edition spelljammer books. Pre-supported versions of both sizes are included. There is also a 1 inch and 2 inch diameter base. Both sizes of ship can fit on either base.

This Triop model is unofficial Fan Content permitted under the Fan Content Policy. Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast. ©Wizards of the Coast LLC.

All my designs are available at my Cults3d page here:
https://cults3d.com/en/users/Mechatronist/creations

Some of my paid designs are also available at Etsy here:
https://www.etsy.com/shop/MechatronicGames

Follow me on Cults3d to stay notified about all of my designs as they are released.

I will also start selling physical models soon. Follow my Etsy shop if you are interested in that.

Here’s a link to a video time-lapse of me designing this model in Blender:
https://youtu.be/kG3Z2D1iapM


Triop Spelljammer Ship Miniature from dnd 2e

Triop Ship Large.stl

Warhammer 40k inspired ork boss nob keycap

ORK KEYCAP

mmGroup0

mmGroup2

A holder for your heroscape cards! Keep track of order/hit markers while still being able to pick up your cards to read that microscopic text!

Heroscape Card Holder.stl

These are great for wargaming and tabletop games alike. Ready to play or paint and display. Can be used for modeling and dioramas as well.

If you like these files and wish to donate it, www.paypal.me/Rinierllc. even a $1 helps greatly.

28mm Stone wall pack

stone wall segment2 based.stl

Simple organizer for everything a player needs for heroscape! Each organizer holds
- 12 Dice
- 4 Order Markers
- 20 Hit Markers
- 2 D20s or A Name Plate

The lid fits so that everything stays in place and is ready to go when you open it. I did not optimize for material use, but if you'd like to you should be able to cut a little bit off the bottom of the organizer/lid and still retain the same function.

I originally made the empty square insert you see for a custom player nameplate, but I left the opening in the lid big enough that you can also use it to store D20s or any other small miscellaneous parts like Airborn Elite's grenade marker. 

If you're making these yourself I hope you enjoy the models!


Heroscape Organizer and Lid

HeroScape Organizer with Name Plate Slot.stl

28mm crates for wargaming and modeling. Perfect for tabletop games and dioramas. Ready to play or paint and display.

If you like these files and wish to donate it, www.paypal.me/Rinierllc. even a $1 helps greatly.

Crates and Stowage 28mm scaled

28mm Crates #4.stl

A model of the Vipership Selljammer from second edition Dungeons and Dragons. This model was designed for a commission for use in a second edition Spelljammer game but it could easily be ported into fifth edition if desired. The original rules and floor plan for the Vipership can be found in “Spelljammer Lost Ships” which can be purchased at DrivethruRPG.

Files are included for two different scales. The thumbnail features the 1:600 scale version. This is the same scale as the official Spelljammer ship models sold by Wizkids. There's also a 1:900 scale version designed to match the approximate scale of the paper cutout ship miniatures that were sold with second edition spelljammer books. Pre-supported versions of both sizes are included. The same 1 inch diameter base is used for both versions.

This Vipership model is unofficial Fan Content permitted under the Fan Content Policy. Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast. ©Wizards of the Coast LLC.

All my designs are available at my Cults3d page here:
https://cults3d.com/en/users/Mechatronist/creations

Some of my paid designs are also available at Etsy here:
https://www.etsy.com/shop/MechatronicGames

Follow me on Cults3d to stay notified about all of my designs as they are released.

I will also start selling physical models soon. Follow my Etsy shop if you are interested in that.

Here’s a link to a video time-lapse of me designing this model in Blender:
https://youtu.be/A9wTHvK40mg


Vipership Spelljammer Ship Miniature from dnd 2e

vipership Large.stl

A model of the Skeleton Ship Selljammer from second edition Dungeons and Dragons. This model was designed for a commission for use in a second edition Spelljammer game but it could easily be ported into fifth edition if desired. The original rules for the Skeleton Ship can be found in “Spelljammer Lost Ships” which can be purchased at DrivethruRPG.

Files are included for two different scales. The thumbnail features the 1:600 scale version. This is the same scale as the official Spelljammer ship models sold by Wizkids. There's also a 1:900 scale version designed to match the approximate scale of the paper cutout ship miniatures that were sold with second edition spelljammer books. Pre-supported versions of both sizes are included. There are files for both a 1in and 2in diameter base. Either one can be used for either scale as long as you use the stand clip that matches the scale of the model you printed.

Commission me to design custom miniatures and buy 3d prints of my designs at Etsy:
https://www.etsy.com/shop/MechatronicGames

STL files for all my designs are available at my Cults3d page here:
https://cults3d.com/en/users/Mechatronist

Follow me on Cults3d to stay notified about all of my designs as they are released.

This Skeleton Ship model is unofficial Fan Content permitted under the Fan Content Policy. Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast. ©Wizards of the Coast LLC.

Skeleton Ship Spelljammer Miniature From DnD 2e

Skeleton Ship Large.stl

In this pack you will find a Tanks and soldier in Power Amror. Each model in this pack comes with supported versions. If you like these models, please check out the rest of the set here...

https://cults3d.com/en/3d-model/game/battletech-tanks-and-power-armor-6mm-8mm

These models can find a great home in your games of Battletech, Adeptus Titanicus, Epic 40K, Polyversal, or any other 6mm/8mm sci-fi tabletop wargame.

nonPareil institute is committed to building better futures for adults with autism through technical and work-readiness training and social engagement activities. These 3d models were created by former nonPareil Institute students and staff members who help other adults on the autism spectrum explore their technical passions and skills.

Battletech Tank and Power Armor Suit (6mm-8mm)

Vehicle_Main_Battle_Tank.stl

A selection of Rocky Soil textured bases, in 30mm, 40mm, 50mm, and 80mm sizes. Includes supported versions. Usable for any modern or sci-fi games that uses round bases.

nonPareil institute is committed to building better futures for adults with autism through technical and work-readiness training and social engagement activities. These 3d models were created by former nonPareil Institute students and staff members who help other adults on the autism spectrum explore their technical passions and skills. You can check us out at www.npusa.org and www.powersourcing.net

One or more textures on the bases presented in this pack of these 3d models have been created with photographs from Textures.com. These photographs may not be redistributed by default; please visit www.textures.com for more information.

Bases for Wargames - Rocky Soil

Rock_Soil_a_30mm.stl

A selection of 25mm round bases for 6mm/8mm infantry in your sci-fi tabletop wargames. Each base come supported and unsupported and each of the five styles has a base with 5 8mm round holes and one with 5 6mm round holes and also one with no holes.

One or more textures on the bases presented in this pack of these 3d models have been created with photographs from Textures.com. These photographs may not be redistributed by default; please visit www.textures.com for more information.

nonPareil institute is committed to building better futures for adults with autism through technical and work-readiness training and social engagement activities. These 3d models were created by former nonPareil Institute students and staff members who help other adults on the autism spectrum explore their technical passions and skills.

6mm/8mm Infantry Bases

SUP_25mm Infantry Base - Gravel Big - No Holes.stl

A selection of three different retro style rocket ships for your 6mm/8mm scifi tabletop wargames.

nonPareil institute is committed to building better futures for adults with autism through technical and work-readiness training and social engagement activities. These 3d models were created by former nonPareil Institute students and staff members who help other adults on the autism spectrum explore their technical passions and skills.

One or more textures on the bases presented in this pack of these 3d models have been created with photographs from Textures.com. These photographs may not be redistributed by default; please visit www.textures.com for more information.

6mm Scale Rocket ships for SciFi Wargames, pack 1

Rocket_01.stl

A selection of Broken Concrete textured bases, in 30mm, 40mm, 50mm, and 80mm sizes. Includes supported versions. Usable for any modern or sci-fi games that uses round bases.

Bases for Wargames - Broken Concrete

Broken_Concrete_30mm_a.stl

A selection of 40mm objective markers for tabletop wargames.

nonPareil institute is committed to building better futures for adults with autism through technical and work-readiness training and social engagement activities. These 3d models were created by former nonPareil Institute students and staff members who help other adults on the autism spectrum explore their technical passions and skills.

40mm Objective Markers for Tabletop Wargames

40mm Objective Marker America.stl

Yo this is Totally "not" a bolt pistol prop from the game "Warhammer 40k"

print it, remix it, use it for a cool cosplay, 
just have fun with it

Not a Warhammer 40k Bolt Pistol

Bolt Pistol Full.stl

A model of a Wasp Ship Selljammer from Dungeons and Dragons. This model was designed for a commission. The design was primarily based on the Wasp art from second edition books.

Files are included for two different scales. The thumbnail features the 1:600 scale version. This is the same scale as the official Spelljammer ship models sold by Wizkids. There's also a 1:900 scale version designed to match the approximate scale of the paper cutout ship miniatures that were sold with second edition Spelljammer books. Pre-supported versions of both sizes are included.

Commission me to design custom miniatures and buy 3d prints of my designs at Etsy:
https://mechatronicgames.etsy.com

STL files for all my designs are available at my Cults3d page here:
https://cults3d.com/en/users/Mechatronist

Follow me on Cults3d to stay notified about all of my designs as they are released.

This Wasp Ship Model is unofficial Fan Content permitted under the Fan Content Policy. Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast. ©Wizards of the Coast LLC.


Wasp Ship Spelljammer Miniature from DnD

Wasp Large.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3146287.

Check out my youtube channel for 3D printing and 3D design videos! https://www.youtube.com/channel/UCuHuFfEPBPNv9AmoDYmXFiQ

Prepare to purge the unclean with a Bolt Gun from Warhammer 40k!

Designed with efficiency and 3D printing in mind, the entire thing prints as a single piece!

It is quite large, if your printer is too small you can either scale it down, or use meshmixer or another software to cut it up if you need to!

Check out my collection of Warhammer props!

Warhammer Omnisian Axe - https://www.thingiverse.com/thing:3213857
Warhammer Triple Laspistol - https://www.thingiverse.com/thing:3347377
Warhammer Laspistol - https://www.thingiverse.com/thing:3499538
Warhammer staff boltgun - https://www.thingiverse.com/thing:3329751
Warhammer Auspex Scanner - https://www.thingiverse.com/thing:3203711
Warhammer Hand Flamer - https://www.thingiverse.com/thing:3184107
Warhammer Bolt Gun - https://www.thingiverse.com/thing:3146287
Warhammer Bolter Round - https://www.thingiverse.com/thing:3146355
Warhammer Inquisitorial Rosette - https://www.thingiverse.com/thing:1175665
Warhammer Meltabomb - https://www.thingiverse.com/thing:3487900
Warhammer containment vessel - https://www.thingiverse.com/thing:3228986
Warhammer Medicae Combat Injector - https://www.thingiverse.com/thing:3230919



Miniatures & Wargaming

Most Popular of All Time

Categories

Popular

Personalize

Trending