Low-Profile Gridfinity Modular Base (Overhang)

GridfinityLowProfileModularBase.stl

Little Magical Puzzle Easter Egg

Puzzle Egg - Assembled.3mf

Magnetic Front Plate - Bambu Lab P1P #ThangsBambuContest

DISPLAY_ONLY.stl

Fridge Magnet Hook - Captive Magnets

A hook with a captive magnet design. Inside this model there are 2 holes for 6x3mm magnets.  During the slicing process you can add a pause at the top layer of the internal magnet container and insert the magnets. After this, the printer will continue to print across the top of the magnets to hide them inside the model.

Homer Donut Frame Remix

donut_frame_remix150.stl

Blank Circular Frames for Remixing

Remix Me Frame Display only.stl

Balloon Dog Magnet

A balloon dog magnet. 

This print requires 4 round magnets of width 6mm and height 3mm. To install the magnets, put a pauze just before the holes for the magnets are covered up when slicing.

Supports needed when printing. Be careful when removing the supports from the nose, this is the most fragile part of the model.

Backing Attachments for Circular Frame Series

Multipurpose Backing.stl

Balloon Butterfly Magnet

A balloon butterfly magnet. 

This print requires 5 round magnets of width 6mm and height 3mm. To install the magnets, put a pauze just before the holes for the magnets are covered up when slicing.

Supports needed when printing. Be careful when removing the supports from the antennas, those are the most fragile part of the model.

BOTL OPNR - the soda bottle helper fridge magnet!

I Love You - Fridge Magnet

Print at 0.2mm layer height and no supports.
Magnet should push fit into the back.
Magnets: https://www.amazon.com/dp/B0BDFFCSKT?ref=ppx_pop_mob_ap_share

Golden Rhombohedra 

Display only do not print.stl

BATMAN BATARANG MAGNET FOR FRIDGE

Batarang magnet for 5.9mm magnets!

If you have another size of magnet laying around and want to make one of this, send me a message and I`ll change to your specific diameter!

Design video with Fusion 360!
https://www.youtube.com/watch?v=YPCdToM5cR8



Tangled Tubes

Tangled Tubes Assembled Display Only Do Not Print.stl

Brain Teaser

Full Brain Display Only Do Not Print.stl

Wall Hanger for Airpods Max with Magnetic Sleep Mode - Remix

6x2_Full_Print_-_Airpods_Max_Holder.stl

3D Printed Self-Assembling Cells

Do Not Print.stl

Friendly Articulated Slug with hidden magnets

I used 2 magnetics (6x3mm).
With a layer height of 0.2mm you should set up a pause at layer 19.

The last to parts of the slug are not movable because of the magnets.
The slug is 150% scaled because of the magnets.
You should print with less weight, for e.g. 0% infill and not more than 2 walls.

Magnetics that I used: https://www.aliexpress.com/item/32951137017.html?spm=a2g0o.cart.0.0.22783c00OsamVW&mp=1

If you don't have a 3D printer, I sell it on Etsy: https://www.mikebayer3d.etsy.com

The original design is from _Isaiah_
https://www.thingiverse.com/thing:4727448

Follow me on social media:
[Facebook](https://www.facebook.com/Mike-Bayer-3D-Druckservice-108801391734722 "Facebook")
[Instagram](https://www.instagram.com/mikebayer3d/ "Instagram")
[Pinterest](https://www.pinterest.de/mikebayer3ddruckservice/ "Pinterest")
[Twitter](https://twitter.com/MikeBayer3D "Twitter")
[Printables](https://www.printables.com/social/244886-mike/prints "Printables")
[Cults3D](https://cults3d.com/en/users/mrmbmrmb/creations "Cults3D")
[Thingiverse](https://www.thingiverse.com/mrmbmrmb/designs "Thingiverse")

etsy Shop:
[etsy](https://www.mikebayer3d.etsy.com "etsy")

Flexi Rabbit with hidden magnets

I used 6 magnetics (6x3mm).
With a layer height of 0.2mm you should set up a pause at layer 20 and 63.

Magnetics that I used: https://www.aliexpress.com/item/32951137017.html?spm=a2g0o.cart.0.0.22783c00OsamVW&mp=1

If you don't have a 3D printer, I sell it on Etsy: www.mikebayer3d.etsy.com

The original design is from Artline_N
https://www.thingiverse.com/thing:2832177

Follow me on social media:
[Facebook](https://www.facebook.com/Mike-Bayer-3D-Druckservice-108801391734722 "Facebook")
[Instagram](https://www.instagram.com/mikebayer3d/ "Instagram")
[Pinterest](https://www.pinterest.de/mikebayer3ddruckservice/ "Pinterest")
[Twitter](https://twitter.com/MikeBayer3D "Twitter")
[Printables](https://www.printables.com/social/244886-mike/prints "Printables")
[Cults3D](https://cults3d.com/en/users/mrmbmrmb/creations "Cults3D")
[Thingiverse](https://www.thingiverse.com/mrmbmrmb/designs "Thingiverse")

etsy Shop:
[etsy](https://www.mikebayer3d.etsy.com "etsy")

Thanksgiving Bulbasaur with Magnet

Magnet

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Low-Profile Gridfinity Modular Base (Overhang)

Little Magical Puzzle Easter Egg

Magnetic Front Plate - Bambu Lab P1P #ThangsBambuContest

Fridge Magnet Hook - Captive Magnets

View 10 new models

Blank Circular Frames for Remixing

Balloon Dog Magnet

Backing Attachments for Circular Frame Series

Balloon Butterfly Magnet

BOTL OPNR - the soda bottle helper fridge magnet!

View 17 new models

Golden Rhombohedra

BATMAN BATARANG MAGNET FOR FRIDGE

Tangled Tubes

Brain Teaser

Wall Hanger for Airpods Max with Magnetic Sleep Mode - Remix

3D Printed Self-Assembling Cells

Friendly Articulated Slug with hidden magnets

Flexi Rabbit with hidden magnets

Thanksgiving Bulbasaur with Magnet