Sexy hexy magsafe stand - rear cable exit

magsafe stand rear cable exit.stl

Sexy hexy magsafe stand

Charging stand main.stl

MAGSAFE MODERN PHONE CHARGING STAND

1 piece magsafe.stl

Frog Cable Holder - Holoprops

Frog_Cable_Holder-Holoprops.stl

Magsafe Stand for iPhone and Airpods

Single or double magsafe charger for iPhone and Airpods

MagsafeV1.STL

Print in Place Quadlock Mag Phone Stand - Wind

This is a remix/redesign based on a model by Clockspring3D.  I wanted to design it to fit on my smaller print bed and add additional designs for your personal taste.

It has been designed for the Quadlock MAG head to fit both the magnetic only and magnetic with wireless charging.  Please check here for more info on the Quadlock Mag system.
https://www.quadlockcase.com/collections/mag

It is a “Print in Place” design, printed flat and rotates on an internal hinge to 30 degrees from vertical for optimal viewing.  The Mag head mounts to the stand (5mm bolt included with the QL head) and has a channel up the middle to run a USB cable into the head.

Smaller print beds will require this to be printed at a 45-degree angle (for beds that are approx. 200x200).

For those that don’t use a Quadlock phone case, I have uploaded adapters for iPhone Magsafe and Snapmount users.
Apple Magsafe Adapter:
https://than.gs/m/858198
Snapmount Adapter:
https://than.gs/m/858228

Apple Magsafe Adapter.3mf

This adapter converts my "Print in Place" Quadlock Mag Phone stands to be Apple Magsafe  compatible.  The Magsafe unit doesnt will need to use double face tape to hold it in place, as it doesnt have a hole for the bolt/nut in this design.

Magsafe iPhone stand

Magsafe charging stand for and model of iPhone that is magsafe compatible. There is cut outs for weights which can be found [here](https://www.amazon.com/gp/product/B016AY25PW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) 5 weights fit in each slot. just pause at the height and put them in then continue printing. 

Magsafe iPhone/apple watch charging stand

This is designed for any model of iPhone with magsafe compatible phones/cases. It has holes in the base for pausing the print and inserting weights into it. i use [these](https://www.amazon.com/gp/product/B016AY25PW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) and its designed to fit these exact ones. I print face down. MAKE SURE YOUR FIRST LAYER IS DIALED IN. supports only on the two holes. might need a wide brim or Lilly pads. 

Miata MX-5 Magsafe Cubby phone charger holder

Designed this for a Mazda Miata cubby hole on the driver left side. It fits really well but may want to double side tape it down so it doesn't pop out ever or come with your phone. Designed it to where you will drill a hole in the back of cubby for the cable to go through.

The phone BARELY fits width wise in that cubby, and may slightly stick out of the cubby length wise. If you have a fat case you may not fit in there.

Miata Magsafe Cubby phone charger holder

MagSafe Phone Dock.stl

Keep an eye on your VERY important notifications while topping up your battery! This phone charger fits the Gridfinity modular storage system, and is designed to hold [a particularly powerful Qi wireless charger](https://www.amazon.com/dp/B09HBFNQBR?psc=1&ref=ppx_yo2ov_dt_b_product_details). I designed it for my iPhone 14, but it should fit nearly any phone, even in an EXTRA THICC case.

To prevent damage, the adapter DOES NOT friction-fit. You will need a thin double-sided tape like carpet tape, or a removable adhesive like E6000.

Magnets or screws are VERY STRONGLY RECOMMENDED! Your phone wants to faceplant. It was born to die.

Fusion source: https://a360.co/3uoOinb

Gridfinity is the ultimate organizer for your whole workshop! Learn more at

Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Gridfinity Tips!

All storage blocks are compatible with all baseplates!
You can add [6x2mm magnets](https://amzn.to/3UuuJV9) to the corners!
You can also use [M3 screws](https://amzn.to/3VRrS9T) to secure the corners.

MagSafe

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Sexy hexy magsafe stand - rear cable exit

Sexy hexy magsafe stand

View 12 new models

Frog Cable Holder - Holoprops

Magsafe Stand for iPhone and Airpods

Print in Place Quadlock Mag Phone Stand - Wind

Apple Magsafe Adapter.3mf

Magsafe iPhone stand

Magsafe iPhone/apple watch charging stand

Miata MX-5 Magsafe Cubby phone charger holder

MagSafe Phone Dock.stl