# The R7Makers Ledger V2 | Practice Completed

**Refinement meets function. The Ledger V2 is a modular, mechanical tracking system designed for those who find satisfaction in the tactile "click" of progress. Whether you are tracking milestones, inventory, or personal goals, this V2 update brings a smoother, more ergonomic feel to your favorite desk companion.**

### 🛠️ **The V2 Architecture**
This isn't just a counter; it's a piece of "Slicer Engineering." 
* **Rounded Ergonomics:** Version 2 features slightly rounded corners, removing the sharp edges of the original design for a premium, retail-quality hand-feel.
* **Textured Pro Finish:** This model is optimized for **Face-Down** printing. When used with a textured PEI plate, the layer lines disappear, leaving a professional matte finish.
* **Filament-Pin Hinge:** Uses a simple strand of 1.75mm filament as the hinge pin. No complex hardware required—just thread it through and "mushroom" the ends with a heat source for a permanent bond.

### ⚙️ **The Tracking Face**
This specific Ledger is labeled for: **Practice Completed**. 
It features a high-contrast mechanical counter (0-999) that stays securely closed thanks to four **9mm x 3mm magnets**.

### 📦 **What You Get**
* **Tuned 3MF File:** Pre-painted and pre-oriented for the best tactile results.
* **Modular STL Parts:** Includes the V2 rounded cover, internal pages, and mechanical spine.

---

### 🚀 **Complete the Collection**
This Ledger is part of a growing modular system. Check out the other variations in my store to track:
* **Books Read**
* **Chores Completed**
* **Debt Paid Off**
* **Practice Completed**
* **Projects Completed**
* **Tickets Closed**

### 🏆 **Merchant Rights & Chapters**
Interested in selling physical versions of the Ledger? This model is part of **Welcome Pack** of the R7Makers Membership.
* **Subscribers** get every Ledger variation automatically.
* **Merchant Tier** members earn the right to sell physical prints of my entire library, while subscribed.

👉 [**Join the R7Makers Journey**](https://thangs.com/designer/R7Makers/memberships)




The R7Makers Ledger V2 | Practice Completed | R7Makers

BooksCountedBookFront.3mf

**Taylor Swift - Complete Eras Collection**
12 print-ready STL files representing iconic album eras
What's Included:

Album Eras: Lover, Reputation, Fearless, Midnights, Evermore, Sparks Fly, TTPD, 1989, RED, Folklore
Bonus Outfits: Folklore (bonus), RED (bonus)

Specs:

10cm chibi style figurines
Pre-tested STL files
Resin & FDM compatible
One-piece prints
Layer height: 0.1-0.2mm

**Perfect for Swifties, pop music fans, and 3D printing enthusiasts!**

Taylor Swift Eras STL Files - Album Collection - Pop Star 3D Print Models

Character_4_Midnights.stl

**Blackpink - Complete Member Collection**
4 print-ready STL files of all Blackpink members in chibi style
What's Included:

Jisoo - Elegant visual
Jennie - Fierce main rapper
Lisa - Powerful dancer
Rosé - Angelic vocalist

Specs:

10cm chibi style figurines
Pre-tested STL files
Resin & FDM compatible
One-piece prints
Layer height: 0.1-0.2mm

**Perfect for Kpop fans, Blinks, and 3D printing enthusiasts!**

Blackpink STL Files - Jisoo Jennie Lisa Rose - Kpop Idol 3D Print Models

Character_1_Jisoo.stl

This is the coolest way to ROCK out the Christmas season! Printed in multiple pieces and assembled separately, this can be a simple seasonal decoration OR it is designed to be a Holiday Radio! All 3mf files included as well as STL files.

Links to assembly videos and Amazon products are included below. Search for the Amazon ASIN to find specific products used. 

Directions:
Printing, you will need - 
1 House 
1 House Back
1 Roof
1 Chimney Snow
1 Door
2 Window Pains
2 Trees (1L, 1R)
8 Gumdrops
33 Lights
2 Candy Twists
1 Candy Twist Knob

Radio:
5W+5W Mini Amplifier Board - Amazon ASIN: B0CQJPPS27 https://www.amazon.com/dp/B0CQJPPS27?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

2" 4Ohm 3W Full Range Audio Speaker Stereo Woofer Loudspeaker - Amazon ASIN: B01CHYIU26
https://www.amazon.com/dp/B01CHYIU26?ref=ppx_yo2ov_dt_b_fed_asin_title

Mp3 Player Audio Module - Amazon ASIN: B086YLK2XP
https://www.amazon.com/dp/B086YLK2XP?ref=ppx_yo2ov_dt_b_fed_asin_title

Solder
Soldering Iron
Wire
(8) 6x2mm magnets

Watch my video here to guidance on assembly: https://youtu.be/s5stnroZ6jE

- All the small pieces, including magnets attach to house and house back in pre-printed holes/slots. Use a little of your fabvorite glue to hold them together. 
- The trees can be attached in either direction (you will see there is a long side and short side). They were designed that the long side attaches to the front of the house, but either way works.
- I originally attached small pieces of speaker fabric to the window pains, but realized it is much easier to glue the window pains and front door to the house, THEN add a piece of speaker fabric (or any colored fabric) behind the openings to the inside of the house.  there is less trimming required doing it this way. Just lay the fabric on the inside of the house and drop a small dab of CA glue to the 4 corners. 
- Watch A video by Perry Daniels here: https://youtu.be/xFWc0rc6z2A?si=k8WPE99ABQhDyO57 to assemble the MP3 player for the internals of the radio. It is the video that inspired me to build this. Give him a like and subscribe while you're there! 
- The Amplifier board is designed to sit on the shelf and use a glue gun to hold it in place. Speaker fits snuggly in behind the left window and held in with glue gun. The mp3 board can be glued to the base of the house. Remember to place the mp3 board towards the front of the house to ensure you have enough flexibility in the power cord to run through the hole in the House Back. 

If you have ANY questions drop into the Discord listed below! 

Printed in Panchroma Matte PLA
https://us.polymaker.com/products/panchroma-matte

Private Use Only.

Discord for Questions: https://discord.gg/7Fxpk3fkak 

Become a Thangs.com Maker Member for unlimited downloads or become a MERCHANT MEMBER for commercial use. 

Members get priority recommendations and customization. We would love for you to join!
Make sure to like and follow. Post your make so we can see!





Gingerbread House Radio / Decor

Gingerbread Radio - House.stl

Give your [IKEA VAPPEBY](https://www.ikea.com/se/en/p/vappeby-bluetooth-speaker-white-gen-3-80517377/) Gen3 Speaker a sophisticated transformation with this GRID kit. This download includes the pictured Cover, Volume Dial (+ Bonus Studio Dial), and Grid Handle. (The power button can be downloaded seperately [here](https://than.gs/m/1274542?affiliateCode=MAKE))

---

**_Printing Guidelines_**

**Handle:**
- 0.16 mm layer height
- 4+ walls, 15%+ infill (use your discretion to make a strong part depending on the filament you use)
- No supports required

**Volume Dial and Cover:**
- 0.16mm layer height
- 2 walls, 15% infill
- No supports required
- For the Volume Dial, start with an opaque filament, and swap to a transparent filament above 2.4mm if you want the sides to light up (I also did a few layers of Black between the white and green to block more light from the front)*

          *For the Studio Dial, start with an opaque filament, and swap to a transparent filament above 8mm (at Z height 11mm if you want it to line up with the cover)

---

**_Assembly_**

**Handle:**
- Use the original screws for the stock VAPPEBY handle to connect this part
- Do not overtighten the 3D printed screw. That will cause the layers to be ripped apart.

**Cover:**
- Print four of the cover pins. Connect them to the back corners of the cover with a 1/4 twist clockwise (You can use pliers if the fit is tight).
- Cover should press fit into the existing rubber holes on the speaker.

**Studio Dial:**
- Optionally print the 'Studio Dial_Indicator' in another color and glue it into the divot on the Dial for an orbiting indicator (the orange dot shown in the photos).

_Feel free to leave a comment if you have any questions!_

---

**Filaments Used in Photos:**
- [Elegoo Rapid PLA+ White and Black](https://shrsl.com/4vqfx) (Also on [Amazon](https://amzn.to/4iioPSQ))
- [Bambu PETG Translucent 'Olive Green'](https://shrsl.com/4vz09)

**Printer Used:**
- [Qidi Plus4 3D Printer](https://qidi3d.com/products/plus4-3d-printer?sca_ref=6089281.BQS8d0sJuF) (Also [on Amazon](https://amzn.to/4jON7VK)) 

*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_*. 

MUSIC

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

The R7Makers Ledger V2 | Practice Completed | R7Makers

Taylor Swift Eras STL Files - Album Collection - Pop Star 3D Print Models

Blackpink STL Files - Jisoo Jennie Lisa Rose - Kpop Idol 3D Print Models

Gingerbread House Radio / Decor

IKEA VAPPEBY GRID Kit // Cover, Volume Dial, and Handle