GEN2 185 - Classic Drawers

Magnet Insert - 6x2mm.stl

Dragon Controller Stand – Creature Series

Controller-Dragon-Head_Holoprops.stl

MultiBoom Phone Holder / Mount - Multiboard

MultiBOOM_Phone_D.stl

Multiboard Free-Standing Foot with Single Desk/Table Clamp

19mm, Single Clamp - Multiboard Free Standing Desk Clamp.stl

Guitar Wall Mount Hanger with Flexible Top

60mm_Arm.stl

Gridfinity 4x1 Wall Mount Base.stl


this is a 5x1 **Gridfinity** compatible wall mounted base so that you can add **Gridfinity** modules to your tool wall.

Designed by Me - [please visit my YouTube Channel ](https://www.youtube.com/c/DIYTINKERER)

The Gridfinity concept was originally designed by **Zach Freedman**


Gridfinity 5x1 Wall Mount Base.stl


this is a 5x1 **Gridfinity** compatible wall mounted base so that you can add **Gridfinity** modules to your tool wall.

Designed by Me - [please visit my YouTube Channel ](https://www.youtube.com/c/DIYTINKERER)

The Gridfinity concept was originally designed by **Zach Freedman**

Spherical Parallel Manipulator Prototype

LinkageSPMx3.stl

Magpul PMAG AR/M4 GEN M3 Holder

Magpul PMAG 30 Holder Rev1.STEP

MultiBOOM 1/4-20 Adapter

MultiBOOM_T-Bolt_to_1:4_.stl

Buck Converter Mount - LM2596 VHB or Bolt-On

LM2596_Buck_Converter_Mount_V1.step

Photo holder eggs

White_03.stl

Lamp “Bonbon”

Bonbon_desk.3mf

Pendant light spot “Robur Tree”

Pendant_lamp.stl

EZPZ Pegboard Hook // 25mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 25mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 20mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 20mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

MOUNT

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

GEN2 185 - Classic Drawers

Dragon Controller Stand – Creature Series

MultiBoom Phone Holder / Mount - Multiboard

Multiboard Free-Standing Foot with Single Desk/Table Clamp

Guitar Wall Mount Hanger with Flexible Top

Gridfinity 4x1 Wall Mount Base.stl

Gridfinity 5x1 Wall Mount Base.stl

Spherical Parallel Manipulator Prototype

Magpul PMAG AR/M4 GEN M3 Holder

MultiBOOM 1/4-20 Adapter

Buck Converter Mount - LM2596 VHB or Bolt-On

Photo holder eggs

Lamp “Bonbon”

Pendant light spot “Robur Tree”

EZPZ Pegboard Hook // 25mm Reinforced Hook

EZPZ Pegboard Hook // 20mm Hook Type B

GEN2 Open Bin Drawers - Standard

Phone Clamp Car holder

J1772 EV Charger Cable & Plug Holder

Minimalistic hook with invisible mount