The DaveMakes Modular Building Set includes a range of modules that you can use to build everything from customized dollhouses to tabletop gaming architecture and terrain. Access compatible modules [here](https://than.gs/c/383034 ).

Stay tuned for more expansion sets!

This download includes windows and doors. See print and assembly details below and in this [video](https://youtu.be/UiALH64cnOY ).

These models are scaled at 1:50. Files can be scaled in your slicer to print at whatever scale you need. Simply take 50 and divide by your target scale to get the factor to use in your slicer. For example, if you want to print models at 1:100 scale divide 50 by 100 to get .5. Scale your models in the slicer by a factor of .5

Remember that as you scale the print down, the fit between pieces will become tighter. You can offset this by reducing your flow rate a bit.

**Assembly:**

This section describes specific consideration for printing the pieces included in this download. You can also view printing and assembly instructions [here](https://youtu.be/UiALH64cnOY ).

The pieces will hold together on their own, use glue if you need a more permanent assembly.

**Windows:**

Select and print a “Window Wall” piece depending on the length of wall you need. Print as oriented with infill and supports. Once printed, the wall can be oriented either way as you are building depending on how high you want the window to be.

If you need just a basic window, print the “Basic Window Frame” and insert into the wall.

For a window with curtains, start by printing two “Window Side Frames”, one “Window Center Frame” and one “Curtain Rod”. Insert the side frames into the sides of the window cutout with the curtain rod holders oriented upwards and press the “Window Center Frame” in between them. Insert the curtain rod into the holders.

Select the type of curtains you want and print in “spiralized” or “vase” mode to achieve the smoothest finish. Snap the curtains onto the curtain rod.

**Doors:**

Decide if you want a single or double door. Select and print the appropriate wall depending on the length of wall you need. Print as oriented with infill and supports.

Print the type of door frame you need and the appropriate number of doors.

Snap the doors into the frame first, then insert the frame into the wall.



DaveMakes Modular Building Set – Windows and Doors

Full Curtains Closed.stl

Add some loot to your tabletop with this pack of 3D printable treasure chest basing bits.

Includes two chest designs, perfect for RPGs, wargames, or diorama builds. These files are royalty-free, so you can print, customize, or sell your own prints. Featured in my recent 3D modeling for 3D printing video, they’re a great way to see the designs in action

https://www.youtube.com/@cc0hort

Treasure Chest Tabletop Game Basing Bits 3D Printable STL

Chest Aged.stl

Learn how I modeled this in Autodesk Fusion: [Watch my tutorial on YouTube](https://www.youtube.com/watch?v=42lBDBxT8Yc&list=PLukROb5Ks071pNieRhTdc1l5-a3JpnDsB&index=1)

I created this pie model entirely in Autodesk Fusion based on [my original model](https://than.gs/m/1030001?affiliateCode=kcd) that used elements I created using other software.

[Connect with me](linktr.ee/karenchaudesigns)

1:6 scale miniature whole pie | As seen on YouTube (Autodesk Fusion tutorial)

pie with pi crust and whipped cream_Karen Chau Designs_painted.3mf

28mm Mini Base Collection

This collection includes 16 28mm x 3.5mm disc bases of varying textures and designs. Ejoy these bases for your miniatures. 

Alien
Brick-Rounded
Brick
DiamondDeck
Dirt
Dirt-with-rocks
Moon
RockRoad
Scale
SciFi-Panel
Shells
Stone1
Trifoil
WoodFloor
WoodFloor2
WoodFloor3

Private Use Only
Become a MEMBER for commercial use and for more like this. Members get priority recommendations and customizations. We would love for you to join! 

Make sure to like and follow. Post your make so we can see! 

28mm Mini Base Collection

Mini Base - 28mm - Stone1.stl

3D Printed Model of the Spirited Away Ducks in a bathtub turned into a diffuser.

Files included:

- .3MF (will all slicer settings)

Dimensions of Base (LxWxH): 120mm x 85mm x 70mm
Dimensions of Ducks (LxWxH): 120mm x 85mm x 25mm

Printed with a Bambu A1 Mini with a 0.2mm Nozzle for the ducks and a 0.6mm Nozzle for the rest of the base.

Print time: Approx. 20hr (16hr Ducks + 4 Hours Base)

Spirited Away Onsen Ducks Diffuser

Ducks Slicer File.3mf

Here it is! **Horse stables for printing on a 3D printer**. This time, the stables are also designed for printing on mini printers like the Bambu Lab A1 mini.
 
The stables feature functional sliding doors and opening windows. They are ideally sized for **Schleich horses**, or other horses up to 12x15x6 cm in size. Inside the stables, comfortable stalls with opening doors await the horses.
 
**The kit is built without the use of glue!**
 
Size of stables: width and depth 35x35 cm, height 18.5 cm
Size of box for horses: 16.5x6.5 cm
 
You can learn more from the attached instructions.
So let's get printing and go play.

Stables for Horses

Complete floor.3mf

The Most complete set for creating your tavern!

TheTavern Set includes:
+50 Models
2 PDF Maps 90x60cm (grid & gridless) CNP WALLS SYSTEM


*Latest update: November 7th, 2022

Models and Updates List:
https://docs.google.com/spreadsheets/d/1nhZK3T4H8tMsFjZtP9nbJ1Vyyuo4FwO6xzfTyP6h-WU/edit?usp=sharing


Join us on Patreon to stay on top of our newest releases and get our exclusive welcome pack.
https://www.patreon.com/castnplay

Tavern Set (Pre-Supported)

Chimney_Moose.stl

The Most complete set for creating the biggest dungeon! 
The Dungeons Set includes:
+40 Models
2 PDF Maps 90x60cm (grid & gridless) CNP WALLS SYSTEM


*Latest update: October 17th, 2022

Models and Updates List:
https://docs.google.com/spreadsheets/d/1nhZK3T4H8tMsFjZtP9nbJ1Vyyuo4FwO6xzfTyP6h-WU/edit?usp=sharing
Join us on Patreon to stay on top of our newest releases and get our exclusive welcome pack.
https://www.patreon.com/castnplay 


Dungeons Set (Pre-Supported)

BridgeStairs_Complete.stl

Hand-sculpted 3D model for high-detail printing: 
**Stylized unicorn**

Take a look at our 3D model in an enormous size!
This is just one **practical example** of how our high-resolution models are used by our customers in real-world scenarios and **in a big scale** ;)
**Customer's video is here (made on a CNC machine in a big scale without any additional model reworks):** https://www.youtube.com/watch?v=meslBfUiWNU

✅ My own concept and sculpting.
🎨 All my 3D models are hand sculpted in ZBrush.
✅ All of them have been tested for 3D printing.
✅ Due to its highest detailing, this 3D model can be effortlessly scaled up, even for real-size applications, like many of our other models. Scale it to your desired size using your slicer software.
💡 Great for fdm and resin printers.

©️ I translating ideas into tangible 3D models. ©️3D-BUG.COM
🪄 The main accent on quality and uniqueness. 🏆
✔️ Links to social, website, additional info and galleries 👉 https://linktr.ee/3DBUG 

_Because quality and aesthetics are my top priorities, your support allows me to remain focused on creativity, giving me the time needed for meticulous detail and fresh ideas._
Support original art. If you appreciate the intricate work of a professional sculptor, please **Follow my profile** to stay updated on new releases and exclusive designs.
**Happy printing and thank you for your support!**

Personal use only.
Commercial use is exclusive to members of the "Commercial Use" tier at our Thangs or Patreon.

**Safety Disclaimer:** Please note that all my 3D models are intended for decorative purposes only.

_Welcome to collaboration! [remote/b2b/b2c/contract]_ 👉 https://linktr.ee/3DBUG

Stylized unicorn

Unicorn_3DP.stl

This collection features some adorable little accessories at 1:12 scale that add a touch of magic to any scene. Inside, you’ll find a miniature cake, a retro lava lamp, and a tiny photo frame. Perfect for dollhouses, dioramas, or book nooks!

Not really into miniatures? No worries! These pieces also make super cute keychains or bag charms, giving you a fun way to express your style wherever you go. They’re small, but packed with personality, and guaranteed to bring a little joy to your everyday. I also used models from the Tea Set from the Flower Power Mini Suitcase (https://than.gs/m/1303506) and the Lip Balm Holder (https://than.gs/m/1274605) designs to complete this mini charm collection.

**Print Settings:**
If you'd like to see the orientation and settings of the print, please take a look at the .3mf file.

_Mini Cake:_
- Suggest a brim
- No supports needed
- 15% infill
- 2-3 walls
- 0.4mm nozzle
- 0.08mm (extra fine) layer height

_Mini Lava Lamp (Glass Enclosure):_
- Suggest a brim
- No supports needed
- 100% infill
- 2-3 walls
- 0.4mm nozzle
- 0.28mm (extra draft) layer height
- Slow down the outer wall, inner wall, sparse infill, internal infill, top sirface to 100mm/s (I recommend using the settings from the provided .3mf file. These settings will help achieve a more transparent look)

_Mini Lava Lamp (Excluding Glass Enclosure):_
- Suggest a brim
- No supports needed
- 15% infill
- 2-3 walls
- 0.4mm nozzle
- 0.12mm layer height

_Mini Photo Frame:_
- Suggest a brim
- No supports needed
- 15% infill
- 2-3 walls
- 0.2 to 0.4 mm nozzle
- 0.06 mm to 0.08mm layer height

**PLA Used:**
- White: https://amzn.to/3FORvWl or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-wht
- Butter Yellow: https://amzn.to/4jAvsBl or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-mat-bylw
- Metallic Finish Brown: https://amzn.to/3XJFnMi or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-shny-brn
- Wood: https://amzn.to/4i6uYla or https://www.hatchbox3d.com/products/3d-wood-1kg1-75
- Jelly Red: https://amzn.to/4jlO34i or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-jred
- Blush Pink: https://amzn.to/4lEBnad or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-mat-blpnk
- Vivid Tangerine: https://amzn.to/42Towtk or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-mat-vtan

**Additional Items:**
- Lobster Claw: https://amzn.to/4lP5Kec
- Key Ring: https://amzn.to/3S51mKe
- Paperclip Chain and Jump Rings: https://amzn.to/4lIkwTS 

**Assembly Video:** https://youtu.be/dYZe-hB4U5A

**Important Note: Not suitable for young children. Contains small parts that may pose a choking hazard.**



Miniature Accessories Set – Charms for Keychains and Bag Charm, Mini Cake, Lava Lamp, Photo Frame

pixelandpapier__mini_lava_lamp__glass_enclosure.stl

Free Non Commercial Version found here: 

Bring to life the rolling hills and cosy hobbit home with your very own Bag End inspired Terrarium. This Bonsai Terrarium pot are for those who love indoor plants and Lord of the Rings.

I had a lot of fun designing this and putting it together, and I hope you do too.

===

Print Settings:

Nozzle - 0.4mm

Layer Height - 0.10

Infill - 5-10%

Supports Needed for some over hanging bits. Use the manual overhang brush to add minor supports here and there. 

Materials - Bambu PLA Matte White

Outer brim 

Total Print time ~ 12hrs

Total Filament used ~180g


Note:
- The chimney's are designed to fit disposable chopsticks so you can use it to test moisture and to stir up dirt for better plant health
- The signage I found online and printed on paper to a small size
- I painted it with acrylic and recommend using a water proof lacquer to protect the paint


Lord of the Rings - Hobbiton Bonsai Terrarium Pot

Hobbiton Bonsai Terrarium Pot.3mf

Big DM screen will accomodate all of your game accessories, from minis to a tablet or [cheat sheets](https://www.gracewindale.com/collections/dms-inventory)!

Every DM needs a place where their imagination lives. And we created such space: keep your cheat sheets handy, hide miniatures for your sneaky ambushes and have all your accessories easily available in one place.

[See the assembly guide here](https://cdn.shopify.com/s/files/1/0761/9103/9783/files/big-screen_assembly.pdf?v=1723779497)

- Easy to print STL files
- Sturdy design
- Detachable ornaments
- Fits 18x18 cm build platform (Prusa Mini, Bambu Mini and bigger FDM printers)
- Customizable: you have a choice to use the screens as your cheat sheets holders, or make them into a mini display unit that can take anything: dice, miniatures, markers, trackers and even a phone or a tablet!
- Instead of paper cheat sheets, you can attach cork or magnetic sheets
- Two-way dice tower lets you show your throws to the players or torture them with suspense 😏
- Mini drawers are big enough to keep anything in order: decks of cards, markers, miniatures — you name it!
 

*Weather & Time tracker, Cheat sheets and Initiative tracker shown on photos are purchased separately.

____

If you are looking to sell 3D print of this model, buy commercial rights here: https://www.gracewindale.com/products/big-screen

DM Inventory: Big DM Screen

screen-part_B_US-letter.stl

The Most complete set for creating an incredible Castle!

The CatleSet includes:
+50 Models
2 PDF Maps 90x60cm (grid & gridless)
*CNP WALLS SYSTEM


*Latest update: February 6th, 2024

Models and Updates List:
https://docs.google.com/spreadsheets/d/1nhZK3T4H8tMsFjZtP9nbJ1Vyyuo4FwO6xzfTyP6h-WU/edit?usp=sharing
Join us on Patreon to stay on top of our newest releases and get our exclusive welcome pack.
https://www.patreon.com/castnplay

Castle Set (Pre-Supported)

MainDresser.stl

The Most complete set for creating the greatest Pirate's Ship!

The Pirate's Ship Set includes:
+60 Models
2 PDF Maps 90x60cm (grid & gridless)
2 PDF Maps 42x27cm (grid & gridless)
*CNP WALLS SYSTEM

*Latest update: September 17th, 2024

Models and Updates List:
https://docs.google.com/spreadsheets/d/1nhZK3T4H8tMsFjZtP9nbJ1Vyyuo4FwO6xzfTyP6h-WU/edit?usp=sharing
Join us on Patreon to stay on top of our newest releases and get our exclusive welcome pack.
https://www.patreon.com/castnplay

Pirate's Ship Set (Pre-Supported)

Mast_A_Complete.stl

The Most complete set for creating an incredible Oriental temple!

The Oriental Temple Set includes:
+40 Models
2 PDF Maps 90x60cm (grid & gridless)
*CNP WALLS SYSTEM


*Latest update: October 10th, 2022

Models and Updates List:
https://docs.google.com/spreadsheets/d/1nhZK3T4H8tMsFjZtP9nbJ1Vyyuo4FwO6xzfTyP6h-WU/edit?usp=sharing
Join us on Patreon to stay on top of our newest releases and get our exclusive welcome pack.
https://www.patreon.com/castnplay

Oriental Temple Set (Pre-Supported)

Podium_Complete.stl

The Most complete set for creating your Alchemist's House!

The Alchemist's House Set includes:
+40 Models
2 PDF Maps 90x60cm (grid & gridless)
*CNP WALLS SYSTEM

*Latest update: September 11th, 2023.

Models and Updates List:
https://docs.google.com/spreadsheets/d/1nhZK3T4H8tMsFjZtP9nbJ1Vyyuo4FwO6xzfTyP6h-WU/edit?usp=sharing
Join us on Patreon to stay on top of our newest releases and get our exclusive welcome pack.
https://www.patreon.com/castnplay

Alchemist's House Set (Pre-Supported)

ScatterBit_Carpet.stl

The Most complete set for creating your Blacksmith's Workshop!

The Blacksmith's Workshop Set  includes:
+40 Models
2 PDF Maps 90x60cm (grid & gridless)
*CNP WALLS SYSTEM

*Latest update: October 10th, 2022

Models and Updates List:
https://docs.google.com/spreadsheets/d/1nhZK3T4H8tMsFjZtP9nbJ1Vyyuo4FwO6xzfTyP6h-WU/edit?usp=sharing
Join us on Patreon to stay on top of our newest releases and get our exclusive welcome pack.
https://www.patreon.com/castnplay

Blacksmith's Workshop Set (Pre-Supported)

WorkingTable_B.stl

The Most complete set for creating any type of store for your adventures!

The Stores Set includes:
+60 Models
12 PDF Maps 42x27cm (grid & gridless)
*CNP WALLS SYSTEM


*Latest update: November 13th, 2023

Models and Updates List:
https://docs.google.com/spreadsheets/d/1nhZK3T4H8tMsFjZtP9nbJ1Vyyuo4FwO6xzfTyP6h-WU/edit?usp=sharing
Join us on Patreon to stay on top of our newest releases and get our exclusive welcome pack.
https://www.patreon.com/castnplay

Stores Set (Pre-Supported)

FoodGoods_LargeShelf_Complete.stl

The Most complete set for creating an incredible temple!

The Temple Set includes:
+50 Models
2 PDF Maps 90x60cm (grid & gridless) 
*CNP WALLS SYSTEM


*Latest update: October 17th, 2022

Models and Updates List:
https://docs.google.com/spreadsheets/d/1nhZK3T4H8tMsFjZtP9nbJ1Vyyuo4FwO6xzfTyP6h-WU/edit?usp=sharing
Join us on Patreon to stay on top of our newest releases and get our exclusive welcome pack.
https://www.patreon.com/castnplay

Temple Set (Pre-Supported)

InvocationCircle_A_Complete.stl

The Most complete set for creating your own medieval house!

The House Set includes:
- +70 Models
- 2 PDF Maps 90x60cm (grid & gridless)
*CNP WALLS SYSTEM*


*Latest update: November 7th, 2022

Models and Updates List:
https://docs.google.com/spreadsheets/d/1nhZK3T4H8tMsFjZtP9nbJ1Vyyuo4FwO6xzfTyP6h-WU/edit?usp=sharing


Join us on Patreon to stay on top of our newest releases and get our exclusive welcome pack.
https://www.patreon.com/castnplay

Medieval House Set (Pre-Supported)

Sink.stl

**FOR PRIVATE USE ONLY!**
_Become a member for the commercial license!_

**SuperPrints Starter Pack – FREE TTRPG Miniatures**🐉⚔️

This is a free starter pack to give you a proper feel for how my minis are designed and how they print. 

**Included in this pack:**
- Beholder
- Mimic
- Dragonborn Paladin

**Key Features:**
✔ Multicolor 3MF file, no painting required!
✔ Recommended Layer height: 0.12mm
✔ Support-free design, prints flawlessly right off the plate.
✔ Matte PLA recommended for the best look.
✔ Optimized for multicolor FDM printers

❌ Personal use only! 
❌ Become a Merchant tier member for the commercial license!

**Bonus** 💀✨
Want an extra **Skeleton** mini?
It’s available as a free bonus on my Patreon:
👉 [SuperPrints StarterPack Plus](https://www.patreon.com/posts/new-starter-pack-146911451)

No painting, no sanding, no cleanup.
This pack is meant as a test run a way to see how the files behave on your printer and whether this style works for you, without any commitment.

If you enjoy these minis, please consider leaving a review and/or becoming a member. I release a new one every Wednesday! 

Happy printing ❤️

_This product is not affiliated with, endorsed, or approved by Wizards of the Coast._

SuperPrints Starter Pack - Easy Multicolor FDM RPG Minis (No supports)

SuperPrints Eyeball Monster.3mf

**FREE DOWNLOAD:** Click Download All to get the Gamblers Dice by Son of a Lich Minis!

Introducing the Gambler's D20! This is a unique 20-sided die, designed to facilitate an extremely high risk, high reward playstyle for characters in TTRPGs. The Gambler's D20 has three 20s (tripling the chance of scoring a critical hit) and three 1s (tripling the chance of a critical fail). Importantly, however, the Gambler's d20 does not feature the numbers 16, 17, 18, or 19. This gives the gambler's d20 an average roll of a mere 9.1, as opposed to the typical 10.5 for a regular d20. 

Perfect for a high-risk magic weapon or a fun curse in your games! Do you have the courage to weild a Gambler's D20 in pursuit of those juicy critical hits? 

3D Printing files included:
> - Inspect the 3D model using the 3D Viewer on Thangs
> - For single color printing, use Gamblers Dice.stl
> - Multicolored pre-colored print profile, use Gamblers Basic 24mm Painted.3mf
> - See attached zip for presupported files

- Sculpted by Thangs3D Community Artist, [DaveMakesStuff](https://thangs.com/designer/DaveMakesStuff)
- Resin Printer supports created by the fantastic [Atlas 3DSS](https://thangs.com/designer/Atlas%203D%20Support%20Solutions)

Also, if you want to help me come up with new ideas or meet some lovely people in Discord, [Subscribe](https://than.gs/u/1660763?plans=true) to support the channel! [HERE](https://than.gs/u/1660763?plans=true)

Follow me for more amazing 3D Minis every month!

MINIATURES

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

DaveMakes Modular Building Set – Windows and Doors

Treasure Chest Tabletop Game Basing Bits 3D Printable STL

1:6 scale miniature whole pie | As seen on YouTube (Autodesk Fusion tutorial)

28mm Mini Base Collection

Spirited Away Onsen Ducks Diffuser

Stables for Horses

Tavern Set (Pre-Supported)

Stylized unicorn

Miniature Accessories Set – Charms for Keychains and Bag Charm, Mini Cake, Lava Lamp, Photo Frame

Lord of the Rings - Hobbiton Bonsai Terrarium Pot

DM Inventory: Big DM Screen