Hold onto your butts! 
This shadow box features the famous T-Rex escape scene from the original Jurassic Park movie. Each layer is 3D printed in a separate color and then stacked on top of each other to create the illusion of depth. Add the toy vehicle to make it more like a diorama. The exterior features screw holes in the back and top if you want to hang it on a wall. It also looks great just sitting on a desk or shelf. 

 

Assembly Instructions
Print each part using the color recommendations provided. Print out 6 of the square spacers. PLA filament was used but other materials may work as well. You will need white paper, scissors, and glue. 

 

1.) Lay box shell on flat surface with opening face up. Make sure screw holes are positioned upright. 

2.) Cut out small piece of white paper to fit into shell. Glue into place. This white layer will serve as the moon. 

3.) Place blue sky layer inside shell on top of the white paper. Glue into place. Wait for glue to dry. 

4.) Add spacers to corners. Glue into place. Wait for glue to dry. 

5.) Add square spacer layer. Glue into place. Wait for glue to dry. 

6.) Repeat steps with the remaining layers in this order: Clouds, Mountains, Plants Back, Dino, Plants Front, Fence. Be sure to place the 4 corner spacers and the square spacer between each layer. Glue everything in place. Wait for glue to dry between each layer. 

7.) Add the lid with glue to seal it shut. Wait for everything to dry. 

8.) Stand the box up and place the car ramp in front of it with your choice of vehicle (not included). 

 

You can also make the secondary version of this diorama by not using any of the spacers. That way there is more room inside the box to fit both the ramp and the vehicle!

Jurassic Shadow Box Diorama

Jurassic Shadow Box.3mf

Brighten your space with this captivating dolphin lightbox, featuring customizable text in Fusion 360. Print it with or without the base to suit your needs. Ideal for marine life enthusiasts, this design adds a playful and personalized touch to any room. Easy to print and assemble, it's a unique addition to your decor.

How to change Name:
https://www.youtube.com/watch?v=MC7ybI3dqj4

If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign!

WARNING!

- remove purge line at the beginning of the print, it may interfere, specially with bigger prints!






Materials and tools:
- glue gun
- aluminum tape
- led strip: simple 1m or 2m white or rgb led USB (recommended 60 LED per meter)
- soldering iron (optional)



RECOMMENDATIONS

- use a textured PEI sheet
- remove purge line at the beginning of the print!
- use the print profile, it has quite a few setting changes that help achieve the best results
- make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer

- use the aluminum tape on the inside of the backplate to help with light diffusion
- glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible

Bambu Studio Settings:
I always recommend using the print profile I provided since it has settings with which I've been able to get the best results.
If you choose not to here are the main slicer settings I recommend:
- preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 to 1.08
- Quality → Wall generator → Arachne
- Quality → Wall transitioning threshold angle → 30º to 50º
- Strength → Advanced → Infill/wall overlap → 20% to 25%
- Increasing retraction / reducing temperature can help reducing wisps
- Order color printing from lightest to darkest color


How to make a hole in Bambu Studio:
https://www.youtube.com/watch?v=OsA23WCxRtg&t=14s&ab_channel=braga3dprint




Assembly video:
https://www.youtube.com/watch?v=QNsShLmXYh0&t=8s&ab_channel=braga3dprint




How to print without AMS:
https://www.youtube.com/watch?v=RUSTGxOOS_U&t=4s&ab_channel=braga3dprint


Cute Dolphin with Customizable Name Lightbox LED Lamp

LED dolphin ams ready.3mf

Rev up the excitement with this sleek 3D printable lightbox showcasing the iconic Porsche car brand. Whether printing just the Porsche logo or the base with a customizable name in Fusion 360 (free for personal use), this model offers versatility and style. Simply open the .f3d file and follow the step-by-step instructions provided in the accompanying YouTube video. Elevate your space with the timeless elegance of Porsche.

How to change Name:
https://www.youtube.com/watch?v=MC7ybI3dqj4

If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign!

WARNING!

- remove purge line at the beginning of the print, it may interfere, specially with bigger prints!






Materials and tools:
- glue gun
- aluminum tape
- led strip: simple 1m or 2m white or rgb led USB (recommended 60 LED per meter)
- soldering iron (optional)



RECOMMENDATIONS

- use a textured PEI sheet
- remove purge line at the beginning of the print!
- use the print profile, it has quite a few setting changes that help achieve the best results
- make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer

- use the aluminum tape on the inside of the backplate to help with light diffusion
- glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible

Bambu Studio Settings:
I always recommend using the print profile I provided since it has settings with which I've been able to get the best results.
If you choose not to here are the main slicer settings I recommend:
- preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 to 1.08
- Quality → Wall generator → Arachne
- Quality → Wall transitioning threshold angle → 30º to 50º
- Strength → Advanced → Infill/wall overlap → 20% to 25%
- Increasing retraction / reducing temperature can help reducing wisps
- Order color printing from lightest to darkest color


How to make a hole in Bambu Studio:
https://www.youtube.com/watch?v=OsA23WCxRtg&t=14s&ab_channel=braga3dprint




Assembly video:
https://www.youtube.com/watch?v=QNsShLmXYh0&t=8s&ab_channel=braga3dprint




How to print without AMS:
https://www.youtube.com/watch?v=RUSTGxOOS_U&t=4s&ab_channel=braga3dprint


Porsche Customizable Lightbox LED Lamp

LED_porsche_customizable_name_ams_ready.3mf

Unleash the power of the Incredible Hulk with this striking 3D printable lightbox featuring the Marvel superhero. Choose to print just the Hulk or the base, which includes a customizable name option in Fusion 360 (free for personal use). Simply open the .f3d file and follow the step-by-step instructions provided in the accompanying YouTube video. Bring the strength and fury of the Hulk into your space with this impressive lightbox.

How to change Name:
https://www.youtube.com/watch?v=MC7ybI3dqj4

If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign!

WARNING!

- remove purge line at the beginning of the print, it may interfere, specially with bigger prints!






Materials and tools:
- glue gun
- aluminum tape
- led strip (here is the one I use): simple 1m white led USB

- soldering iron (optional)



RECOMMENDATIONS

- use a textured PEI sheet
- remove purge line at the beginning of the print!
- use the print profile, it has quite a few setting changes that help achieve the best results
- make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer

- use the aluminum tape on the inside of the backplate to help with light diffusion
- glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible

Bambu Studio Settings:
I always recommend using the print profile I provided since it has settings with which I've been able to get the best results.
If you choose not to here are the main slicer settings I recommend:
- preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 to 1.08
- Quality → Wall generator → Arachne
- Quality → Wall transitioning threshold angle → 30º to 50º
- Strength → Advanced → Infill/wall overlap → 20% to 25%
- Increasing retraction / reducing temperature can help reducing wisps
- Order color printing from lightest to darkest color


How to make a hole in Bambu Studio:
https://www.youtube.com/watch?v=OsA23WCxRtg&t=14s&ab_channel=braga3dprint




Assembly video:
https://www.youtube.com/watch?v=QNsShLmXYh0&t=8s&ab_channel=braga3dprint




How to print without AMS:
https://www.youtube.com/watch?v=RUSTGxOOS_U&t=4s&ab_channel=braga3dprint


Lightbox

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Jurassic Shadow Box Diorama

Cute Dolphin with Customizable Name Lightbox LED Lamp

The Hulk Customizable Name Lightbox LED Lamp