The Hestra - Vase Mode Pendant Light, Bambu 3MF

The Hestra - Vase Mode Pendant Light by Mimetics3D.stl

Brisa Lamp

lara dobletwist strong3 .stl

Swing - a mid century table lamp

Swing small main.3mf

Solstice Wall Light

Solstice Light.stl

The Kita  Lamp | Modern and Unique Home Decor for Desk and Table

KITAMAIN.stl

Cannon spotlight lamp

Canon_lamp.3mf

Mushroom lamp “Morchella Esculenta”

Head_big.stl

Pixel Glow

Pixel Glow.stl

Saturn Desk Lamp

Greetings!

I'm excited to present you with my Saturn Desk Lamp. This unique piece is sure to add a celestial glow to your workspace.

Here's what you'll need to assemble this lamp: a lamp socket and a bulb. I personally prefer a multicolored LED bulb, but the choice is yours. Please note, i designed this lamp specifically for this lamp socked ton ebay. You can make your own version, it just involves more effort because the parts might not fit.

EU Version:

EU Plug: https://ebay.us/ASMco5

EU Bulb: https://ebay.us/yB4Acp

US Version:

US Plug: https://ebay.us/yHsc2c

US Bulb: https://ebay.us/oTWuS1

Support my work by purchasing through these links!

On to the print settings:
For this project, you only need to print the files which are numerically labelled.

Saturn: Opt for a 0.4 mm nozzle. Alternatively, set your print to a line height of 0.2 mm and a width of 0.4 mm. Be aware that the domes can be challenging to print. I recommend reducing the print speed to 50% when you reach layer 670. Use 100% infill with concentric infill, or adjust your wall count to a high figure, such as 40. For material, any basic white PLA should suffice. I've found that Sunlu White PLA+ gives great results. Please steer clear of matte or glitter materials as they won't produce the desired effect. The good news is, you won't need any supports!

Holder: Unlike the Saturn part, you'll need to print the holder with supports.

Voila! Your Saturn Desk Lamp is ready to brighten up your space. If you've enjoyed creating this lamp, please consider supporting my filament needs by buying me a coffee at https://www.buymeacoffee.com/Ri0m0. As a student, every bit of support helps!

In addition to this, you'll find more lamp designs on my profile, and there are more on the way! Feel free to reach out if you encounter any difficulties or if you have any suggestions.

Please keep in mind that this design is intended for non-commercial use only.

Enjoy lighting up your workspace with your very own Saturn Desk Lamp!

Lovely Lighthouse - No AMS (or similar system) required

Lighthouse Bottom.stl

Earth Lithopanes

This is a Earth Lithopane for you to remix.
There are different sizes 75 mm, 100 mm, 125 mm, 150 mm, 175 mm, 200 mm, 225, mm and 250 mm on there.
It's designed for an FDM printer with a 0.4 mm nozzle. You may be able to print this with bigger nozzles, if you use the layer height and width i recommend.
Print settings:
Domes are quite hard to print. I never printed this as a whole, I always cut it into pieces first.
Layer Height 0.2 mm
Layer Width 0.4 mm
No supports.
I always decrease the speed at the top of the dome (when the bridging occurs) to 50%. You can do this in Cura using the extension post-processing.
I use standard white PLA for these. If you are unsure if your filament works, just shine through the walls of the print with your phone lamp at something like 10% print completion. You should see the Lithophane effect.

Remember to add me when you remix this, I'm eager to see what you do with this. I made some ready to print lamps with this, you can check them out at my site.

If you used this, please consider buying me a coffee at https://www.buymeacoffee.com/Ri0m0

The Avio Lamp | Modern and Unique Home Decor for Desk and Table

AVIOMAIN.stl

Lamp “Bonbon”

Bonbon_desk.3mf

Cute Cottage - Village House - Lamp

Cute Cottage.3mf

Diffuser Type 1 - Lamp accessories by Lunfardo

DIFFUSER_TYPE_1_Z148.obj

Mushroom lamp “Boletus Edulis” parametric

Base_screw_socket.stl

Moon Lithopanes

Moon 250mm.stl

Small Table/Bedside Lamp 

Small Table_Bedside Lamp (Base).stl

Christmas Tree (LED Lamp or Decoration)

model262.stl

Standalone Decoration (with infill) - Black Plastic (ABS)

Standalone Decoration (with infill) - White Plastic (ABS)

Egg Tealight Cover -Fancy Bunnies

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
Sized to fit a typical LED tealight candle. But can be printed larger or smaller for just décor!
***
***If you would like to sell physical objects, please see the CCT Partner tier on our Patreon***
***
If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chelscct


Lamp

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

The Hestra - Vase Mode Pendant Light, Bambu 3MF

Brisa Lamp

Swing - a mid century table lamp

Solstice Wall Light

The Kita Lamp | Modern and Unique Home Decor for Desk and Table

Cannon spotlight lamp

Mushroom lamp “Morchella Esculenta”

Pixel Glow

Saturn Desk Lamp

Lovely Lighthouse - No AMS (or similar system) required

Earth Lithopanes

The Avio Lamp | Modern and Unique Home Decor for Desk and Table

Lamp “Bonbon”

Cute Cottage - Village House - Lamp

Diffuser Type 1 - Lamp accessories by Lunfardo

Mushroom lamp “Boletus Edulis” parametric

Moon Lithopanes

Small Table/Bedside Lamp

Christmas Tree (LED Lamp or Decoration)

Egg Tealight Cover -Fancy Bunnies