Ever had a luggage zipper slowly open on its own? Or have you caught a thief trying to sneakily unzip your backpack? These 2 interlocking pieces add an extra layer of security to your zipped bags and luggage. Simply slide the 2 halves together and push the circle thru the hole until it clicks. Roughly the size of a quarter, the print should not take very long depending on your settings. You can print the 2 halves in different colors or keep them the same. Use small metal keyrings on each half to attach them to your zippers. 

Zipper Clip - Security Lock

Zipper Clip (2).stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 
__________________________________________________
The GEN2 Series is the next evolution in the most versatile 3D printed drawer system, the GEN2 Modular Storage System. You can now easily swap drawers around thanks to the fully 3d printable QuickLock mechanism design.

__________________________________________________

**STEP 1:** Location

Decide how you would like to use your GEN2 storage. Keep in mind that the drawers are modular and can be easily swapped between under table and table top locations. All drawers are available for mounting under the table using rails, but you can also place them on top of any surface with table top kits.

Find these kits at JERRARI3D/gen2-modular-system

**[• UNDER TABLE (GEN2 RAILS)](https://youtu.be/2UPSWt1l6U8)**
_Attach GEN2 drawers under any surface by installing the GEN2 RAILS. Once installed drawers can slide and lock into place, they can then be swapped out and rearrange in seconds._
**[• TABLE TOP KITS](https://youtu.be/1AuZleSjCps)**
_Table Top Kits include covers and foot rails that when combined with drawer cases create a rigid structure that can be placed anywhere_

These drawers are completely compatible and interchangeable with any GEN2 drawer systems in [STANDARD length](https://www.jerrari3d.com/gen2-modular-system/standard). 

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Black PETG](https://amzn.to/46wset1) (My go to for the drawer bodies)
• Screwdriver
• Magnets (Optional): [10x5x2mm](https://amzn.to/46odFrD) or [10x2mm](10x2mm)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)
• Label Maker (makes 12mm labels) - [I prefer this one](https://amzn.to/410DL1p)

• (*Optional - Under table) Countersunk woodscrews: (Metric: 4x25mm to 4x16mm) or (SAE: #6 or #8 up to 1" long)
• (*Optional - Under table) Drill bit that is smaller diameter than the wood screws
• (*Optional - Under table) Pen, Marker, or Scratch Awl (for installing under tables)
 

**INSTRUCTIONS**

Detailed visual instructions at [Jerrari3d.com](https://www.jerrari3d.com/gen2-modular-system)

INSTRUCTIONS

See attached videos or visit for basic instructions [JERRARI3D.com](https://www.jerrari3d.com/home)




GEN2 Filament Drawer - STANDARD

Drawer Stoppers.stl

GEN2 QuickLocks V1.stl

GEN2-QL Locking Mechanism - Bi-Directional (Optional).stl

GEN2 Filament Sample Classic Drawer - 185-1W-05H.stl

185-1W-05H Case.stl

Magnet Insert - 6x2mm.stl

Magnet Insert - 10x2mm.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 
__________________________________________________
The GEN2 Decor Series is the next evolution in the most versatile 3D printed drawer system, The GEN2 Modular Storage System. You can now easily swap faceplate and handles to fit the mood of the room you want. Being able to easily customize colors, patterns, or adding custom text.

The GEN2 Decor Filament Drawer is a great way to record and organize samples of your filament, a must have for multi-color printing!
__________________________________________________

**STEP 1:** Location

Decide how you would like to use your GEN2 storage. Keep in mind that the drawers are modular and can be easily swapped between under table and table top locations. All drawers are available for mounting under the table using rails, but you can also place them on top of any surface with table top kits.

Find these kits at JERRARI3D/gen2-modular-system

**[• UNDER TABLE (GEN2 RAILS)](https://youtu.be/2UPSWt1l6U8)**
_Attach GEN2 drawers under any surface by installing the GEN2 RAILS. Once installed drawers can slide and lock into place, they can then be swapped out and rearrange in seconds._
**[• TABLE TOP KITS](https://youtu.be/1AuZleSjCps)**
_Table Top Kits include covers and foot rails that when combined with drawer cases create a rigid structure that can be placed anywhere_

These drawers are completely compatible and interchangeable with any GEN2 drawer systems in [STANDARD length](https://www.jerrari3d.com/gen2-modular-system/standard). 

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Black PETG](https://amzn.to/46wset1) (My go to for the drawer bodies)
• Screwdriver
• Magnets (Optional): [10x5x2mm](https://amzn.to/46odFrD) or [10x2mm](10x2mm)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)
• Label Maker (makes 12mm labels) - [I prefer this one](https://amzn.to/410DL1p)

• (*Optional - Under table) Countersunk woodscrews: (Metric: 4x25mm to 4x16mm) or (SAE: #6 or #8 up to 1" long)
• (*Optional - Under table) Drill bit that is smaller diameter than the wood screws
• (*Optional - Under table) Pen, Marker, or Scratch Awl (for installing under tables)
 

**INSTRUCTIONS**

Detailed visual instructions at [Jerrari3d.com](https://www.jerrari3d.com/gen2-modular-system)

INSTRUCTIONS

See attached videos or visit for basic instructions [JERRARI3D.com](https://www.jerrari3d.com/home)




GEN2 Decor Filament Drawer - 185 (STANDARD)

prusaslicer-filament-chip-dividers.3mf

GEN2 Filament Sample Decor Drawer - 185-1W-05H.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 
__________________________________________________
The GEN2 Series is the next evolution in the most versatile 3D printed drawer system, the GEN2 Modular Storage System. You can now easily swap drawers around thanks to the fully 3d printable QuickLock mechanism design.
__________________________________________________

**STEP 1:** Location

Decide how you would like to use your GEN2 storage. Keep in mind that the drawers are modular and can be easily swapped between under table and table top locations. All drawers are available for mounting under the table using rails, but you can also place them on top of any surface with table top kits.

Find these kits at JERRARI3D/gen2-modular-system

**[• UNDER TABLE (GEN2 RAILS)](https://youtu.be/2UPSWt1l6U8)**
_Attach GEN2 drawers under any surface by installing the GEN2 RAILS. Once installed drawers can slide and lock into place, they can then be swapped out and rearrange in seconds._
**[• TABLE TOP KITS](https://youtu.be/1AuZleSjCps)**
_Table Top Kits include covers and foot rails that when combined with drawer cases create a rigid structure that can be placed anywhere_

These drawers are completely compatible and interchangeable with any GEN2 drawer systems in [LARGE length](https://www.jerrari3d.com/gen2-modular-system/large). 

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Black PETG](https://amzn.to/46wset1) (My go to for the drawer bodies)
• Screwdriver
• Magnets (Optional): [10x5x2mm](https://amzn.to/46odFrD) or [10x2mm](10x2mm)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)

• (*Optional - Under table) Countersunk woodscrews: (Metric: 4x25mm to 4x16mm) or (SAE: #6 or #8 up to 1" long)
• (*Optional - Under table) Drill bit that is smaller diameter than the wood screws
• (*Optional - Under table) Pen, Marker, or Scratch Awl (for installing under tables)
 

**INSTRUCTIONS**

Detailed visual instructions at [Jerrari3d.com](https://www.jerrari3d.com/gen2-modular-system)

For basic instruction on assembly please check out the above video

GEN2 Slim Drawers - LARGE

GEN2 2x0.5 Slim Double Drawer - LARGE.stl

GEN2-QL Rail - Quad - LARGE.stl

**[This model and so many more are included in the Pixel and Plastic Membership.](https://than.gs/u/1139820?plans=true)**

Old-Fashioned Lock and Key - 3D Printable with Functional Mechanism!

Secure your treasures in true vintage style with this old-fashioned lock and key—a perfect fit for our 3D printable treasure chest! Crafted to capture the charm of classic padlocks, this model prints support-free and features a single internal mechanism for smooth, reliable locking. With an alignment peg guiding the key into place, unlocking feels as authentic as turning the key to a long-lost treasure.

Support-Free Printing: No supports needed, ensuring a smooth print with minimal post-processing.
Functional Mechanism: One internal mechanism provides secure, satisfying locking action.
Precise Key Alignment: Includes an alignment peg for easy key insertion and a smooth twist to unlock.
Treasure Chest Compatible: Designed to fit perfectly with our 3D printable treasure chest, so you can lock up your precious loot!
Add this lock to your treasure chest, and rest assured your valuables are secured with vintage charm!

This model and so many more are available in the [Pixel and Plastic](https://than.gs/u/1139820?affiliateCode=pix) membership!
Get access to all of our designs in one membership!

Lock And Key

278_LockAndKey_PiratesLife_PIXELandPLASTIC_RM.3mf

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 
__________________________________________________
The **[GEN2 Modular System](https://www.jerrari3d.com/gen2-modular-system)** is a 3D printable storage solution offering ultimate flexibility and customization. Perfect for home users, hobbyists, and small businesses, so you can print exactly what you need and customize every piece to fit your space and style.

Unlike store-bought sets, GEN2 lets you print only what you need and expand your setup whenever you want. The drawers snap together seamlessly, giving you endless expansion possibilities. With the unique QuickLock mechanism, rearranging or relocating drawers is quick and effortless, so your storage can grow and adapt with you.

**CLASSIC DRAWERS**
These one-piece drawers print with the handle built in, no assembly needed. They’re quick, simple, and ready to use right off the bed. While they offer convenience, they don’t allow for the same material savings or faceplate customization as the Decor series.

__________________________________________________

**STEP 1:** Location

Decide how you would like to use your GEN2 storage. Keep in mind that the drawers are modular and can be easily swapped between under table, tabletop, and wall mount locations.

Find these kits at [JERRARI3D.com](https://www.jerrari3d.com/gen2-modular-system)

**[• UNDER TABLE (GEN2 RAILS)](https://www.jerrari3d.com/gen2-modular-system/rails)**
_Attach GEN2 drawers under any surface by installing the GEN2 RAILS. Once installed drawers can slide and lock into place, they can then be swapped out and rearrange in seconds._
**[• TABLE TOP KITS](https://www.jerrari3d.com/gen2-modular-system/table-top-kits)**
_Table Top Kits include covers and foot rails that when combined with drawer cases create a rigid structure that can be placed anywhere_
**[• WALL MOUNT KIT](https://www.jerrari3d.com/gen2-modular-system/instructions/wall-mount)**
_Mount GEN2 cases and drawers to almost any vertical surface using the GEN2 Wall Mount – Lite. Once installed, your layout is secure, modular, and easy to expand or rearrange anytime._

**What You'll Need**

Visit [Jerrari3D.com](https://www.jerrari3d.com/gen2-modular-system) for a list of all compatible drawers.


**HARDWARE**

🔧[**Listed in instruction manuals**](https://www.jerrari3d.com/gen2-modular-system/instructions)

**INSTRUCTIONS**

🔧[**Visit Jerrari3d.com for Step-By-Step Instructions**](https://www.jerrari3d.com/gen2-modular-system/instructions)


Please note: The Non-Commercial license refers specifically to selling prints. You're absolutely welcome to use my designs in commercial environments—I actually encourage you to use them anywhere you see fit! 👍

v2508

GEN2 165 Classic Drawers

165-1W-1H Case.stl

165-1W-1H Classic Drawer.stl

165-1W-2H Case.stl

165-1W-2H Classic Drawer.stl

165-1W-3H Case.stl

165-1W-3H Classic Drawer.stl

165-1W-05H Case.stl

165-1W-05H Classic Drawer.stl

165-1W-15H Case.stl

165-1W-15H Classic Drawer.stl

165-2W-1H Case - No Tabs.stl

165-2W-1H Case.stl

165-2W-1H Classic Drawer.stl

165-2W-2H Case - No Tabs.stl

165-2W-2H Case.stl

165-2W-2H Classic Drawer.stl

165-2W-3H Case.stl

165-2W-3H Classic Drawer.stl

165-2W-05H Case - No Tabs.stl

165-2W-05H Case.stl

165-2W-05H Classic Drawer.stl

165-2W-15H Case - No Tabs.stl

165-2W-15H Case.stl

165-3W-1H Case.stl

165-3W-1H Classic Drawer.stl

165-3W-05H Case.stl

165-3W-05H Classic Drawer.stl

165-4W-1H Case.stl

165-4W-1H Classic Drawer.stl

165-4W-05H Case.stl

165-4W-05H Classic Drawer.stl

Classic Drawer 165-3W-2H.stl

Classic Drawer 165-3W-15H.stl

Classic Drawer 165-4W-2H.stl

Classic Drawer 165-4W-15H.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 
__________________________________________________

These drawers use GEN2 rails much longer than the standard GEN2 Lack drawers providing those with larger printers (about 300mm x 300mm) even greater storage capacity. These large drawers are part of the GEN2 Modular Storage System I designed which features a simplified installation method that allows you to rearrange and customize layouts in minutes.

Originally designed for the “Original Prusa i3 MK3 ENCLOSURE…", The Lack drawers have found their way on to many desks, workbenches, and other tables as well. Now with the GEN2's rail design you can quickly swap the storage units between work areas.

Features:
• Gen2 rails allowing quick and easier swap-ability and combinations of many Gen2 Storage System designs.
• Lack Drawers also include optional slots for magnets allowing drawers to snap into place with a nice "Click".
• Drawer stoppers keep your drawers from attacking your feet.
• Designed for larger and easier to install wood screws over the original lack enclosure drawer design.

**HARDWARE**
• Screwdriver
• Countersunk woodscrews: (Metric: 4x25mm to 4x16mm) or (SAE: #6 or #8 up to 1" long)
• Drill bit that is smaller diameter than the wood screws
• Pen, Marker, or Scratch Awl
• Magnets (Optional): 10x5x2mm or 10x2mm
• M3 nuts
• M3 Screws M3x6 - M3x10

**INSTRUCTIONS**
_ *See video for basic instructions_
 • With a marker or pen use the GEN2-QL rail to mark the hole locations on the surface you are mounting.

• Drill out marked locations using a drill bit smaller than the diameter of the wood screw you will be using.

• Prep the rail for installation by installing M3 nuts into the hexagonal holes. You can use a M3 screw to position and tighten the nut in place.

• Install the rail using wood screws, use at least 4 screws on the outer corners to mount the single rail and and 6 to mount the double rail. (extra screw holes are available if you plan to stack more than 2 rows of drawers or contents of heavier than normal weight.)

• Prep the drawer case for installation:

• Install GEN2-QL (QuickLock Mechanisms) These will allow you to quickly lock and unlock drawers without the need to screw them in place with a rail lock.

- Install optional magnets if desired 
NOTE: you only need to install at least one magnet, you can choose to install 2 stacked if you want more magnetism between the case and the drawer. Pay attention to polarity, they can be corrected later if needed.

- Install optional nuts in drawer case (these are only used if you are installing a shorter drawer beneath this drawer case.

- Install optional drawer stops by pressing them into place as they are friction fit. Pay attention to the orientation, notch facing down and towards the front to pass through the slot. The one labeled “L” goes on the left side of the case and “R” on the right side. (While facing the front of the case)

**OPTIONAL - Alternative method for locking drawers** _(You do not need this if you are using GEN-QL QuickLock Mechanisms)_
• Slide the case into position until it either stops or lines up with the front of the rail. (If you feel any resistance you might need to clean up and plastic imperfections around the male or female rails. 


• Slide a rail lock into the rail found on the backside of the drawer case, slide all the way to the top until it buts up against the hole in the rail that contains the nut. Screw in place using a M3x8 or M3x10.

• Prep the drawer, install the optional magnet, pay attention to the polarity. (If you need to remove the magnet you can use another magnet to pull it out of place or use a small Allen wrench or paper clip inserted into the hole below it.)

• Insert the drawer by tilting in back when installing in order to pass by the drawer stopper notches. The drawer should now slide into place.

• I guess you're all done unless you want to make more drawers :)

Installing Drawers under each other

• This is the same process as above but instead of mounting the "Rail Lock" into the nut on the rail you will need to slide a “Rail Lock Upper” into place on the back of the case above or if installing a shorter drawer line up with the hole in the case above it.
NOTE: You can only install the same length or smaller drawer case under each drawer case.


**RECOMMENDED PRINT SETTINGS**
Filament: PLA (PETG or ABS for heavier duty storage)
*PETG for QuickLocks
Nozzle Size: 0.4mm
Print Height: 0.2-0.35mm
Infill: 10-20%

GEN2 270 Classic Drawers

270-1W-1H Classic Drawer.stl

270-1W-2H Classic Drawer.stl

270-1W-05H Classic Drawer.stl

270-1W-15H Classic Drawer.stl

270-2W-1H Classic Drawer.stl

270-2W-2H Classic Drawer.stl

270-2W-05H Classic Drawer.stl

270-2W-15H Classic Drawer.stl

270-3W-1H Classic Drawer.stl

270-3W-05H Classic Drawer.stl

270-4W-1H Classic Drawer.stl

270-4W-05H Classic Drawer.stl

Classic Drawer 270-3W-2H.stl

Classic Drawer 270-3W-15H.stl

Classic Drawer 270-4W-2H.stl

Classic Drawer 270-4W-15H.stl

GEN2 QuickLock A - V1-11.stl

GEN2 QuickLock B - Bi-Directional (Optional).stl

GEN2 115 Classic Drawers

115-1W-1H Case.stl

115-1W-1H Classic Drawer.stl

115-1W-2H Case.stl

115-1W-2H Classic Drawer.stl

115-1W-05H Case.stl

115-1W-05H Classic Drawer.stl

115-1W-15H Case.stl

115-1W-15H Classic Drawer.stl

115-2W-1H Case.stl

115-2W-1H Classic Drawer.stl

115-2W-2H Case.stl

115-2W-2H Classic Drawer.stl

115-2W-05H Case.stl

115-2W-05H Classic Drawer.stl

115-2W-15H Case.stl

115-2W-15H Classic Drawer.stl

Classic Drawer 115-3W-1H.stl

Classic Drawer 115-3W-2H.stl

Classic Drawer 115-3W-05H.stl

Classic Drawer 115-3W-15H.stl

Classic Drawer 115-4W-1H.stl

Classic Drawer 115-4W-2H.stl

Classic Drawer 115-4W-05H.stl

Classic Drawer 115-4W-15H.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 

__________________________________________________

The GEN2 Decor Series is the next evolution in the most versatile 3D printed drawer system, The GEN2 Modular Storage System. You can now easily swap faceplate and handles to fit the mood of the room you want. Being able to easily customize colors, patterns, or adding custom text.

__________________________________

**What you need?**
These drawers are completely compatible and interchangeable with any GEN2 drawer systems in MINI length. 

To customize these drawer here are my recommended links to get started, you can also fin more at [jerrari3d.com](https://www.jerrari3d.com/)
 
**FACEPLATES**
• Essential Series - [DOWNLOAD](https://than.gs/m/1116946)
• Chevron Series - [DOWNLOAD](https://than.gs/m/1116950)
• EdgeMetal Series - [DOWNLOAD](https://than.gs/m/1134534)

**HANDLE/KNOBS**
• BlockBar Series - [DOWNLOAD](https://than.gs/m/1116949)
• Crystal Series - [DOWNLOAD](https://than.gs/m/1134382)

_______________________

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Black PETG](https://amzn.to/46wset1) (My go to for the drawer bodies)
• Screwdriver
• Countersunk woodscrews: (Metric: [4x25mm to 4x16mm](https://www.ikea.com/us/en/p/fixa-200-piece-wood-screw-set-70224228/)) or (SAE: #6 or #8 up to 1" long)
• Drill bit that is smaller diameter than the wood screws
• Pen, Marker, or [Scratch Awl](https://amzn.to/3YmjhAF) (for installing under tables)
• Magnets (Optional): [10x5x2mm](https://amzn.to/46odFrD) or [10x2mm](https://amzn.to/3WuMkzp)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)
• Magnets for Gridfinity (6x2mm) - [I prefer these in 300 count](https://amzn.to/3B3JIlr)
• [Magnetic Insertion Tool V2](https://www.printables.com/model/1008467-magnet-insertion-tool-v2) (Optional)

For basic instruction on assembly please check out the above video

**INSTRUCTIONS**
• Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.

• As noted above you'll also need a GEN2 system of your choice, don't worry, they are fully modular and can be changed around at any time.

_______________________
Gridfinity designed by [Zack Freedman](https://than.gs/u/76763)
Magnetic Gridfinity developed using [Actually Parametric Gridfinity – Base Grid + Bins](https://www.printables.com/model/399759-actually-parametric-gridfinity-base-grid-bins/files) by [pcnc](https://www.printables.com/@pcnc)

GEN2 Decor Gridfinity Magnet Drawers - MEDIUM

GEN2 2x1 Gridfinity Magnet Double Drawer - MEDIUM.stl

GEN2 Decor Gridfinity Magnet Drawers - MINI

GEN2 2x1 Decor Gridfinity Magnet Double Drawer - MINI.stl

The StashCan is an imitation soda can with a programmable combination lock on the bottom of the can and a sequential puzzle lid which prevents unauthorized access to the can's contents.  Super fun and super detailed.  This new version 2.1 has updated files, instructions and support for AMS so that the combination on the bottom of the can is more visible.  But it also prints well without an AMS.  

It is 100% printable, and no hardware fasteners or adhesives required.  

It is a fun, hide-in-plain-sight storage solution with added functionality thanks to the combination lock. While it is not entirely secure due to its portability and plastic material, it provides an enjoyable and challenging experience.  It is going to likely be the most complex thing you have ever printed.

This is an advanced model with many details, so please refer to the documentation on my blog at https://www.logicalplanet.com/ and watch the accompanying video before attempting this print.

New and updated assembly and operating instructions are available here...
https://www.logicalplanet.com/collections/stashcan2_buildguide/

**Key Features**
Fully 3D printable — no additional hardware, fasteners, or adhesives required.
Prints without external supports.
Includes a sequential puzzle mechanism and a programmable 3-digit combination lock.

**Overview**
The StashCan2.1 consists of three main assemblies:

Lid Assembly: Features a locking mechanism requiring a specific sequence to unlock.

Main Body Assembly: Connects the Lid Assembly at the top and the Lock Assembly at the bottom.

Lock Assembly: Secured to the Main Body Assembly and prevents unauthorized access unless unlocked using the combination code.

The lid’s puzzle mechanism adds an extra layer of complexity to opening the can, complementing the combination lock for a more engaging experience.

**Printing Information**

* Material: PLA or PETG
* Nozzle: 0.4mm
* Layer Height: 0.2mm
* Line Width: 0.4mm
* Wall Count: 4 (1.6mm)
* Top and Bottom Layer Count: 5
* Detect Thin Walls: ON
* Infill: 40% cubic
* Brim: No
* Supports: Integrated into the design where necessary.
* Print Orientation:  As per the 3mf and stl files.

**Assembly Notes**
Assembling the StashCan2 is intricate. Please follow the assembly instructions available at https://www.logicalplanet.com/collections/stashcan2_buildguide/

---
**Related Links**
[3-digit Logical CardLock Case - The Programmable Gift Card Case with a Twist](https://than.gs/m/1464652)
[4-digit Logical CardLock Case - The Programmable Cash Case with a Twist](https://than.gs/m/1467071)
[PuzzleLock Box — Lock and Puzzle in a Box](https://than.gs/m/1439725)
[BinaryBin – 16-Digit Binary Coded Lockable Container](https://than.gs/m/1354661)
[Programmable Combination Lock Gift Box](https://than.gs/m/1204871)
[Sequential Discovery Puzzle Gift Box #1 (GBS1)](https://than.gs/m/1227965)

---
Please [join the LogicalPlanet Discord community via my linktree](https://linktr.ee/logicalplanet) to discuss this and any other LogicalPlanet projects, upcoming projects, ideas and anything else related to LogicalPlanet.   

**[https://www.logicalplanet.com/](https://www.logicalplanet.com/)**
email me at [logicalplanet3d@gmail.com](mailto:logicalplanet3d@gmail.com) 

---
**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.  




StashCan 2.1 - 3D Printed Secret Safe with Programmable Lock

StashCan 2v10a 101 Can Top (with support) [silver].stl

StashCan 2v10a 102 Pull Tab [silver].stl

StashCan 2v10a 103 Push Down Plate [silver].stl

StashCan 2v10a 104 Push Down Spacer [silver].stl

StashCan 2v10a 105 Lock Spring [silver].stl

StashCan 2v10a 106 Cam Plate [whiite].stl

StashCan 2v10a 107 Top C Clip [accent].stl

StashCan 2v10a 108 Top Retainer [accent].stl

StashCan 2v10a 201 Can [red].stl

StashCan 2v10a 202 Can Liner [white].stl

StashCan 2v10a 203 Gravity Latch [white].stl

StashCan 2v10a 204 Thread Lock [white].stl

StashCan 2v10a 318 Lock Top [white].stl

StashCan 2v10a 319 Lock C Clip [accent].stl

StashCan 2v10a 321 Lock Disk A [white].stl

StashCan 2v10a 322 Lock Disk B [white].stl

StashCan 2v10a 323 Lock Disk C [white].stl

StashCan 2v10a 331 Key Disk A [accent].stl

StashCan 2v10a 332 Key Disk B [accent].stl

StashCan 2v10a 341 Ring Spring x3 [accent].stl

StashCan 2v10a 351 Lock Dial (for AMS) [silver-red].3mf

StashCan 2v10a 361 Lock Housing (for AMS) [silver-red].3mf

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 

__________________________________________________

The GEN2 Decor Series is the next evolution in the most versatile 3D printed drawer system, The GEN2 Modular Storage System. You can now easily swap faceplate and handles to fit the mood of the room you want. Being able to easily customize colors, patterns, or adding custom text.

__________________________________

**What you need?**
These drawers are completely compatible and interchangeable with any GEN2 drawer systems in LARGE length. 

To customize these drawer here are my recommended links to get started, you can also fin more at [jerrari3d.com](https://www.jerrari3d.com/)
 
**FACEPLATES**
• Essential Series - [DOWNLOAD](https://than.gs/m/1116946)
• Chevron Series - [DOWNLOAD](https://than.gs/m/1116950)
• EdgeMetal Series - [DOWNLOAD](https://than.gs/m/1134534)

**HANDLE/KNOBS**
• BlockBar Series - [DOWNLOAD](https://than.gs/m/1116949)
• Crystal Series - [DOWNLOAD](https://than.gs/m/1134382)

_______________________

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Black PETG](https://amzn.to/46wset1) (My go to for the drawer bodies)
• Screwdriver
• Countersunk woodscrews: (Metric: [4x25mm to 4x16mm](https://www.ikea.com/us/en/p/fixa-200-piece-wood-screw-set-70224228/)) or (SAE: #6 or #8 up to 1" long)
• Drill bit that is smaller diameter than the wood screws
• Pen, Marker, or [Scratch Awl](https://amzn.to/3YmjhAF) (for installing under tables)
• Magnets (Optional): [10x5x2mm](https://amzn.to/46odFrD) or [10x2mm](https://amzn.to/3WuMkzp)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)
• Magnets for Gridfinity (6x2mm) - [I prefer these in 300 count](https://amzn.to/3B3JIlr)
• [Magnetic Insertion Tool V2](https://www.printables.com/model/1008467-magnet-insertion-tool-v2) (Optional)

For basic instruction on assembly please check out the above video

**INSTRUCTIONS**
• Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.

• As noted above you'll also need a GEN2 system of your choice, don't worry, they are fully modular and can be changed around at any time.

_______________________
Gridfinity designed by [Zack Freedman](https://than.gs/u/76763)
Magnetic Gridfinity developed using [Actually Parametric Gridfinity – Base Grid + Bins](https://www.printables.com/model/399759-actually-parametric-gridfinity-base-grid-bins/files) by [pcnc](https://www.printables.com/@pcnc)

GEN2 Decor Gridfinity Magnet Drawers - LARGE

GEN2 2x1 Decor Gridfinity Magnet Double Drawer - LARGE.stl

This is not your average gift box...  It is functional, fun and practical.  It has four 10-digit programmable lock tumblers incorporated into the lid.  Which means there are 10,000 possible combinations.  You can secure your gift and share the passcode at the perfect moment—whether it’s on Christmas morning, a birthday, or another special occasion.

No more sneaky peeks into presents before the big day! This clever gift box is as practical as it is fun, adding an extra layer of anticipation to gift-giving.

**Why Choose This Gift Box?**
* Secure and Unique: The built-in combination lock lets you control when the gift can be opened.
* 100% 3D Printed: No hardware, fasteners, or adhesives required. Everything you need is printed.
* Easy to Assemble: No supports or post-processing necessary.

**Assembly Instructions**
Please see my video for instructions on how to assemble this.

**Print Settings**
For the best results, use these settings:
* Material: PLA or PETG (other materials may also work)
* Nozzle: 0.4mm
* Layer Height: 0.2mm
* Line Width: 0.4mm
* Wall Count: 4 (1.6mm)
* Top and Bottom Layer Count: 5
* Detect Thin Walls: ON
* Infill: 100% recommended, minimum 40% (Cubic pattern)
* Ironing: Not required
* Brim: No
* Support: No

---
**Related Links**
[3-digit Logical CardLock Case - The Programmable Gift Card Case with a Twist](https://than.gs/m/1464652)
[4-digit Logical CardLock Case - The Programmable Cash Case with a Twist](https://than.gs/m/1467071)
[PuzzleLock Box — Lock and Puzzle in a Box](https://than.gs/m/1439725)
[BinaryBin – 16-Digit Binary Coded Lockable Container](https://than.gs/m/1354661)
[StashCan 2.1 - 3D Printed Secret Safe with Programmable Lock](https://than.gs/m/1060354)
[Sequential Discovery Puzzle Gift Box #1 (GBS1)](https://than.gs/m/1227965)

---
Please [join the LogicalPlanet Discord community via my linktree](https://linktr.ee/logicalplanet) to discuss this and any other LogicalPlanet projects, upcoming projects, ideas and anything else related to LogicalPlanet.   

**[https://www.logicalplanet.com/](https://www.logicalplanet.com/)**
email me at [logicalplanet3d@gmail.com](mailto:logicalplanet3d@gmail.com) 

---
**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.  


Programmable Combination Lock Gift Box

GBL1 1v00a lock wheel (tumbler) (no AMS) (x4).3mf

GBL1 1v00a Main Box.stl

GBL1 1v00a grid.3mf

One of my favorite designs, back for the Thangs #throwback contest! A print-in-place treasure chest with a fully functioning lock (although not very secure)!

Perfect little box for Halloween, tabletop games or little trinkets!

&nbsp;

---

**Printing tips:**
0.2mm layer height is fine. The model is already in the optimal orientation, and no supports are needed!

If you need it bigger, it should scale up just fine!

&nbsp;

---

After printing, carefully bend the lid and loosen the hinges, breaking any possible z-seam blobs inside. Then check the bottom of the chest and the lock latch; run a fingernail or some other thin part along the latch edges and slightly push apart to loosen any fused z-seams. You can use for example a flat screwdriver and push the latch from the opposite end of the larger gap to loosen it finally. It's better to make sure the latch is free before twisting the key in the lock and possibly breaking it inside.

Print in Place Treasure Chest — #throwback

Print in Place Treasure Chest.stl

This Chain Link Vase is part of the “Love Locks” project. Use it on its own or with pre-made “Love Locks.” 

If you really want to impress your Valentine, try remixing your own Love Locks with custom initials or messages!

See here for video: https://youtu.be/9z0LjM8kXJQ 

To hold water, you will need to place a cylindrical glass vase inside of the Chain Link Vase. The inside diameters of the small and large Chain Link Vase are approximately 50mm and 100mm respectively.

Project links:
Small Chain Link Vase: https://social.thangs.com/m/638918 
Large Chain Link Vase: https://social.thangs.com/m/638915 

A Dozen Pre-made Love Locks: https://social.thangs.com/m/638927 
Blank Love Locks for Remixing: https://social.thangs.com/m/638942



Chain Link Vase Small

This Chain Link Vase is part of the “Love Locks” project. Use it on its own or with pre-made “Love Locks.” 

If you really want to impress your Valentine, try remixing your own Love Locks with custom initials or messages!

See here for video: https://youtu.be/9z0LjM8kXJQ 

To hold water, you will need to place a cylindrical glass vase inside of the Chain Link Vase. The inside diameters of the small and large Chain Link Vase are approximately 50mm and 100mm respectively.


Tired of people stealing your summer beverage? This “Anti-Theft Beverage Container” with a custom nameplate and padlock will make sure it doesn’t happen again. 

See here for video: https://youtu.be/BAQYgoG8yio 
 
This design is a submission to the #thangsworkspace challenge to remix an existing design with an "outdoor fun" theme. It is a remix of MandicReally’s “Blank Can Cup” design found here: https://social.thangs.com/m/67884

May 30, 2022: "Can Cup No Label" added. This version does not have a label holder. All other elements and dimensions are the same.

#MakerMay

Anti-Theft Beverage Container

Can Cup.stl

Lid.stl

Blank Label.stl

Can Cup No Label.stl

Secure your valuables in this high-security lockable chain link box! Prints without supports.

See here for video: https://youtu.be/ytrVkgFzmtk 
 
This Chain Link Lock Box is part of the “Love Locks” project. See project links below.

Remix your own “Love Lock” for a chance to win a BambuLab 3D printer and gift certicficates! See here for contest details: https://blog.thangs.com/how-about-a-valentines-day-remix-contest-64a21de3335b 

Project links:
Small Chain Link Vase: https://social.thangs.com/m/638918
Large Chain Link Vase: https://social.thangs.com/m/638915
A Dozen Pre-made Love Locks: https://social.thangs.com/m/638927
Blank Love Locks for Remixing: https://social.thangs.com/m/638942


Chain Link Lock Box

Display only do not print.stl

Safe is a functional 3D printed safe with a fully working numeric combination lock. The lock is completely mechanical, reliable, and allows you to set your own custom code, making it a fun and practical storage solution for small valuables 💰

- Size: Height= **140 mm; Width=130 mm; Depth=140 mm**
- **Working numeric combination lock** - 3 dials, each with 6 numbers (Total of 216 possible code combinations)
- Easy assembly - No glue required. **Fully 3D printable** 🔧
- No additional parts required
- This is still a plastic safe 😄 Please don’t store your entire fortune inside ⚠️
- **Detailed instructions can be found [here](youtube.com/watch?time_continue=10&v=ggpjlgQLG8k&embeds_referring_euri=https%3A%2F%2Fwww.printables.com%2F)** 👈

**Pre-sliced .3mf print profile optimized for Bambu Lab printers**

Safe | Vault | Bank | Money Bank | Piggy Bank

Safe.stl

💰 Looking to sell physical prints? Our unbranded models and editable CAD files make it easy to create, customize, and launch your own branded products. Join our network of vendors through one of our [Commercial Membership](https://than.gs/u/2998597?plans=true) options.

---

Keep your doors securely in place with the 3DPONTO Door Stopper — a simple, practical, and easy-to-print solution for everyday use. Its clever spring-inspired design ensures a snug fit under the door, preventing unwanted movement and keeping your space comfortable and convenient.

---

**Features:**
- **💡** **Easy-to-print**: No supports required, optimized for hassle-free 3D printing.
- 🔒 **Secure fit**: Spring-like design locks it into place once wedged under the door.
- 🏠 **Practical everyday use**: Perfect for keeping doors open when airflow or easy access is needed.
- 📏 **Durable build**: Designed to withstand repeated daily use.

---
**Recommended Printing Settings:**
- No supports required
- 0.2mm layer height
- 80-200mm/s speeds
- 15% infill
- No build plate adhesion required

---
**❓ Have questions or need support? Feel free to send us a message directly!**

🔗 Follow us for more designs and stay updated with our latest releases.

**👍 Liked this design? Check out our other models on our profile!**

Door Stopper

3dponto_Door_Stopper.stl

LOCK

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Zipper Clip - Security Lock

GEN2 Filament Drawer - STANDARD

Lock And Key

GEN2 270 Classic Drawers

GEN2 Decor Gridfinity Magnet Drawers - MEDIUM

StashCan 2.1 - 3D Printed Secret Safe with Programmable Lock

Programmable Combination Lock Gift Box

Print in Place Treasure Chest — #throwback

Chain Link Vase Small

Anti-Theft Beverage Container

Chain Link Lock Box