**Print your own beautiful pendant lamp project!**
This project utilizes mostly 3D-printed parts and is ideal for a simple, modern living room.

**How does it work?**
The lamp is designed to snap together without any hardware, except for a light socket and cord.

**Colors:**
For the best visual effect, I recommend using lighter colors such as gray, white, or light brown filament. Dark colors will not produce the same lighting effect as shown in the pictures.

This is the filament I used for the Project.
PolyMaker PLA Peanut: (1.1 kg Needed pr. lamp)                   
https://amzn.to/4azt3lh  (Affiliate link)      
Copper PLA:  (0.2 kg Needed pr. lamp) 
https://amzn.to/3V04Oa2  (Affiliate link)   

**Printer & Material Requirements:**
The design has no built-in supports.
A printer with a build plate of 250x210x200mm or larger.
All parts can be printed without the need for a MMU.
All parts can be printed in PLA or PETG.

**Print the “Small Test Print”**

Print the “Small Test Print” to ensure the fitment is correct. If you are experienced with 3D printing, you may notice that the print seems more challenging than necessary. This is due to the small overhang perimeter, which I designed to ensure that the print bed texture appears uniformly on the entire lamp shade arm when the two parts are assembled.

**3D Printed Parts List:**
- Lamp Shade : Main Color
- Lamp Shade Top: 40 pcs
- Lamp Shade Bottom: 40 pcs
 
Mounting Rings Second Color:
- Top Ring: 1 pc
- Middel Ring: 1 pc
- Bottom Ring: 1 pc

**Hardware Required:**
I used the HEMMA IKEA light socket and cord, but the following Amazon light socket and cord should work as well:

- https://amzn.to/4dP7BM9  (Affiliate link)

I recommend the following light bulb because it does not produce much heat and allows full control over the lighting effects:

- https://amzn.to/3UVmEuP  (Affiliate link)


**Before Purchase.**
Be aware that this is a big project and requires a lot of print time and material. If you make this project, print 4 or 5 test pieces of the lampshade and all the mounting rings to check the size and fitment before printing all the pieces.

Elegant Pendant Lamp

Full Pendel STEP.step

Print of STG-02M Machairodus and STG-03 Scimitar Tooth from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. File set is also separated for the different color palettes between the Machairodus and Scimitar Tooth builds with instructions included. Height of assembled model is approximately 4.00" (101mm) tall at the top of the head.

Machairodus and Scimitar Tooth

Scimitar_Tooth_Yellow.3mf

Print of STG-00 Sumilidon from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. Height of assembled model is approximately 4.0" (101mm) tall at the top of the head and and 4.5" (114mm) at the top head ornaments.

Sumilidon

Sumilidon_Beige.3mf

Print of KLN-02M Maasai Moran and KLN-03 Maasai Laibon from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. File set is also separated for the different color palettes between the Moran and Laibon builds with instructions included. Height of assembled model is approximately 4.00" (101mm) tall at the top of the head.

Maasai Moran and Maasai Laibon

Maasai_Laibon_Leg_Waist_Brown.stl

Print of KLN-01 Unitrix from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. Height of assembled model is approximately 4.25" (108mm) tall at the top of the head.

Unitrix

Unitrix-Leg_Rear_Skirt_Orange.stl

Print of KLN-00 Warbandit from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. "Head_Cylinder", "Barrel" and "Arm_Rivets" parts will need to be printed 2 times, and Toe and Leg Rivets 6 times. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. Height of assembled model is approximately 4.0" (101mm) tall at the top of the head and and 5" (127mm) at the top head ornaments.



Warbandit

Warbandit-Leg_Shin_Brown.stl

Print of MSM-04 Acguy from Mobile Suit Gundam Thunderbolt in roughly 1/144 scale. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. The holes in the knee and elbow joints and the "slots" for the hands should be reamed with a 4mm drill bit to ensure proper fit for the pins that are inserted through them during assembly.

Acguy Thunderbolt Version

Acguy_TB-Torso_Mid_Strip_Beige.stl

Print of KBT-02 Bayonet from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts are labeled with "R" or "L" in their filenames. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. Height of assembled model is approximately 4.25" (108mm) tall at the top of the head and and 5.5" (140mm) at the top of the horns.

Bayonet

Bayonet-Head_Main_Black.stl

Print of KBT-01 Metabee from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts are labeled with "R" or "L" in their filenames. The model is designed to be color separated. Files are organized in zip file based on what color filament they are to be printed in. Height of assembled model is approximately 4" (100mm) tall at the top of the head and and 5" (127mm) at the top of the horns.

Kit

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Elegant Pendant Lamp

Machairodus and Scimitar Tooth

Sumilidon

Maasai Moran and Maasai Laibon

Unitrix

Warbandit

Acguy Thunderbolt Version

Bayonet

Metabee