RK87 Keypuller Holder

Key_Puller_MountV2.stl

Replacement foot for Hyper X Alloy Origins keyboard

noga za tipkovnco (1).stl

Voyager kailh choc tester (original by ZSA)

voyager_tester_left.stl

Keychron k series aliminium rail adapter

A rail that clips on to the Keychron K# series of keyboards' aluminium rails.
Supports are recommended, remove them carefully to make sure you don't damage the stabilising part of the clip.

Keychron Q11 Wrist Rest (V2)

Left-Body.stl

Keychron Q11 Wrist Rest (V1)

Left.stl

OP-1 Super Customizer Kit

Customize your OP-1 synthesizer by Teenage Engineering with this massive collection of knobs, dials, and doodads. Designed for easy printing and maximum fun! 

Download includes:

30 knob styles
4 volume knob styles
3 frames for the OLED screen
4 crank styles
3 bender styles
replacement foot
bestcase protective case + stand
knob and volume tools to make your own custom knobs (subtract from other models)*
*requires the ability to subtract STL from other models, which you can do in Microsoft 3D Builder and other free software.

Use default print settings. All files print without support materials

 

For 'dot' variations, insert 1.75mm filament into hole and trim flush for color accent

Try out the basic replacement knob for free here.

 

Photographed models were printed with MatterHackers PRO series PLA and SpiderMaker 3D Matte PLA

Cute Blob Cats - Holoprops

Blob_Cat-Body_1LegUp_Holoprops.stl

OP-1 BestCase // Simple Decksaver

Protect your OP-1 in the coolest way possible with a 3D printed case! Better yet, the OP-1 BestCase is both a deck protector and a stand that tilts the OP-1 up to take advantage of the same ergonomic benefits that computer keyboards have been rocking since the 80's.

The model includes round tabs at each corner to improve build plate adhesion. They can be ripped off afterward, or cleanly removed with a X-acto knife.

This case uses a friction fit designed for PLA, so materials that shrink more like ABS may be too tight.

As you're likely aware, PLA is not sun-friendly, so avoid exposing a PLA case to warm environments to prevent warping. If you want extra security, I recommend silicone bands like these (also on eBay) or these.

 

Abomination keyboard 6 column case

case 6-col-right.stl

9° DOIO Megalodon KB16 stand

Raises the Megalodon KB16 to match the 9° incline option of most keyboards.
**Note:** Fit might be a bit snug if you are using a filament with a high shrinkage rate. I would recommend printing at 100.5-101% if this is the case or you can sand or file down the internal sides a little bit.

MECHANICAL KEYBOARD - 69 KEY - 65% MML KEYBAR

PlateComplete.stl

SumNibble Nullbits Nibble Case

A case designed for the Nullbits Nibble65.  Made to directly replace the bottom-most PCB plate without needing additional hardware. I went a little crazy giving the board an inner structure to try and capture the light from the bottom LED's and bring it out to the edges, if printed in transparent filament.

The example in the photos was printed in transparent PETG at very low speeds, higher temps and 0.3 mm layer height. I left the model in one piece, if your printer bed isn't large enough to fit in one piece just use your slicer to cut the model in half.

Mute Keycap

MX stem.

I did a filament at the first layer of the mic icon to make it more readable, and it looks nice.

Made for a custom macro pad

Printed with inland pla

Prototype: 3D Printed HOT SWAP Mechanical keyboard.

Keyboard caps - Braille Alphabet A-Z

Keyboard caps - Braille Alphabet Remix from - https://www.thingiverse.com/thing:738769/files

Keyboard

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

RK87 Keypuller Holder

Replacement foot for Hyper X Alloy Origins keyboard

Voyager kailh choc tester (original by ZSA)

Keychron k series aliminium rail adapter

Keychron Q11 Wrist Rest (V2)

Keychron Q11 Wrist Rest (V1)

View 78 new models

View 46 new models

View 20 new models

Abomination keyboard 6 column case

9° DOIO Megalodon KB16 stand

MECHANICAL KEYBOARD - 69 KEY - 65% MML KEYBAR

SumNibble Nullbits Nibble Case

Mute Keycap

Prototype: 3D Printed HOT SWAP Mechanical keyboard.

View 38 new models

Mini Macro Pad

Simple foot for the mercutio

TheAlternate - A Handwired 67 Key Mechanical Keyboard

Modular Keypad Base