Hello! I am excited to release this model as I have been working very hard to get this model to print the best it can as a print in place, functional, and "articulating" print.

SPACE! The final frontier...but how is your Alexa going to get there without her helmet?

I've had it in my head for awhile now to make something for the Amazon speakers, and I even bought the Echo Dot on sale about a year ago - I just never got to it - until now.

I have made two versions of this model, the base "Spaceman" simple version, and the full on "Astronaut" helmet version. This is the premium exclusive supporter Astronaut version. The difference between the two is the decoration of the oxygen gear on the front. (I may or may not have plans to add more fun extra "flair" items to the exclusive model, depending on how well it does).

All that being said, this can still be a tough print. The joints are fairly close together, for the visors, and they are thin, tall, round pieces printing directly next to each other. Make sure that whichever filament you use, you have it dialed in well. I included the 3MF file with the settings that I found success with in printing mine - although looking at the astronaut helmet I printed, the purge values could be upped a bit to reduce bleed. Make sure you have a clean plate, good adhesion, and when in doubt, slow it down. With those things in mind, I think you will find this can print very nicely, with no assembly required for it to work right off the plate.

Let me know what you think about it, and if you think models like this are something I should continue to do. I have had success selling speaker holders in the past, personally, so I think this could be lucrative, given that the Amazon listing for this speaker has over 100k REVIEWS. Looking forward to hearing from you guys!

Astronaut Helmet Speaker Base fits Amazon Echo Dot

Astronaut v4 with Respirator.3mf

**Mirror leaves are two creative printable models that play with the reflection of the mirror and help you organize your bathroom supplies.**

 Taking the shape of a leaf, the other half emerges when placed on the mirror, creating a beautiful natural composition to set the mood in your bathroom.

 They are also modular organizers that you can combine as you need. There is a bowl model with a water drainer on which you can place a hand soap, as well as a brush. The other model has 4 slots of different shapes and sizes to organize your toothbrushes, razors and even place bottles on top.

Assembly is as simple as putting double-sided adhesive tape on the side of the leaves, being able to stick, remove and move them around the mirror at your convenience. You can see how I do it in the video below.
[Assembly Video](https://youtu.be/daUmZ5Ajyu4)

I printed them using the following parameters: 0.16 mm layer height, 10% infill, no supports, 6 top layers, 3 bottom layers. I used green matte filament

For commercial use: https://www.cubee3d.com/designers/creaserra?code=Q3LE76j59zaB

Mirror leaves

hoja1.stl

The **PLEIADES Soap Cover** is a quick and clever way to elevate your boring soap bottle. This fits bottles up to 57 mm x 83 mm x 103 mm tall with a 28mm opening.

---

My **PLEIADES** series of prints are designed to be printed in vase/spiral mode in your slicer. I suggest printing this model with a **0.4 mm nozzle width**. Adjust bottom solid layers to be 1.6 mm thick (or the maximum number of layers before the hole is covered). No top layers. **Make sure your slicer is not set to close small gaps.** In BambuStudio I set the _'Slice gap closing radius'_ to 0 mm

--- 

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Fillamentum PLA Extrafill Sky Blue](https://bit.ly/FM-xtra) (also at [MatterHackers](https://bit.ly/xtrafill)).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_


PLEIADES Soap Cover // 57x83x103

PLEAIDES Soap Cover 57x83x103.stl

The **PLEIADES Soap Cover** is a quick and clever way to elevate your boring soap bottle. This fits bottles up to 47 mm x 96 mm x 130 mm tall with a 28mm opening.

---

My **PLEIADES** series of prints are designed to be printed in vase/spiral mode in your slicer. I suggest printing this model with a **0.4 mm nozzle width**. Adjust bottom solid layers to be 1.6 mm thick (or the maximum number of layers before the hole is covered). No top layers. **Make sure your slicer is not set to close small gaps.** In BambuStudio I set the _'Slice gap closing radius'_ to 0 mm

--- 

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab PETG-CF and Bambu Green PLA filaments](https://bit.ly/bamFIL).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_


Interior

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Astronaut Helmet Speaker Base fits Amazon Echo Dot

Mirror leaves

PLEIADES Soap Cover // 57x83x103