Wolf A - With Free Dragon  - 5e DnD Inspired for RPG and Wargamers

32mm_Wolf_1.stl

Alicorn Dragon

Cinderwing3D Alicorn Dragon Winged Colors.3mf

gridfinity plain bins

1x1x6.3mf

16x16 MU - Center Grid Interfitted - MultiBoard Octagon Plate

16x16 Multiboard Core Tile.stl

Ember Vase for Unique Home Decor

Vase ember small.stl

SPIRIT OCTOPUS FREE

B3D - Spirit Octopus FREE.stl

Thin Dual Clip

Lite Dual Clip.stl

Lucario - Pokemon - Fan Art

Baby Crystal Dragon 2025

Baby Crystal Dragon 2025.stl

Raised Triple Snap (DS Part B)

Raised Triple Snap (DS Part B) - Loose.stl

Stitch - Lilo & Stitch - Fan Art

Stitch - Lilo & Stitch - Fan Art
If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

Extra Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Tightness Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Medium** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Extra Long Bony Basilisk:**
https://than.gs/m/942802
**Loose Tolerance Extra Long Bony Basilisk:**
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

20x7.5 mm Hook (Bolt-Locked Insert)

20x7.5 mm Hook (Bolt-Locked Insert).stl

Venus Flytrap Snack Clips - Bag Clips

Trap.stl

Planetary Egg Container

**Planetary Egg Container**

This egg shaped container prints-in-place and uses a planetary gear stage on the bottom which allows it to open 4 times faster than its turned.

**How it works**
The bottom outside shell is the ring gear, the outer top shell is the carrier, and the inner shell is the sun gear.  Rotating the bottom shell  while holding the top shell results in the plant gears rotating inner shell at a 4:1 ratio.  36 teeth of the sun, divided by 12 teeth of the planet, plus one.

**Print instructions**
Its roughly 112mm tall, prints in place, designed for a .4mm nozzle, .2mm layer heights, no supports at 100%.  There is a 4mm hex hole in the sun gear to free it up the gears if necessary. 
**Remove the brims** 
There are four built in brims attached to the sun gear that will need to be removed, I did so easily with side cutters

Printed on the [Muldex]( https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer.
___
**Support and Licensing**
If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)



Multiboard Tape Measure Storage Clip

Multiboard Tape Measure Storage Clip.stl

6.25 mm - Dual Snap (DS Part A) - VHB Tape Mount

8 mm - Dual VHB Tape Mount - DS Part A.stl

2x2 Multiboard Corner Legacy Tile

2x2 Multiboard Corner Tile.stl

Sugar Skull

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpts By @ChelsC423***

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

***If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chaoscoretech***


#ValentinesDay #Valentine #Love #Hearts #Skull #SugarSkull

Valentine Sugar Skull

1 LU Bin Fit - Bin-To-Bin Clicking Lite Rail - (1.5 MU Rail)

1H - Bin-To-Bin Rail Click Connector.stl

I

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Wolf A - With Free Dragon - 5e DnD Inspired for RPG and Wargamers

Alicorn Dragon

gridfinity plain bins

16x16 MU - Center Grid Interfitted - MultiBoard Octagon Plate

Ember Vase for Unique Home Decor

SPIRIT OCTOPUS FREE

Thin Dual Clip

Lucario - Pokemon - Fan Art

Baby Crystal Dragon 2025

Raised Triple Snap (DS Part B)

Stitch - Lilo & Stitch - Fan Art

Extra Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Tightness Joints)

20x7.5 mm Hook (Bolt-Locked Insert)

Venus Flytrap Snack Clips - Bag Clips

Planetary Egg Container

Multiboard Tape Measure Storage Clip

6.25 mm - Dual Snap (DS Part A) - VHB Tape Mount

2x2 Multiboard Corner Legacy Tile

Sugar Skull

1 LU Bin Fit - Bin-To-Bin Clicking Lite Rail - (1.5 MU Rail)