castle tower pen holder

castle tower pen holder


**printing settings** 
nozzle: 0,4 
layer height: 0.2 
wall line count: 2 
infill: 10% 
support: no 
this model is licensed under_[ theCreative Commons - Attribution - Non-Commercial - Share Alikelicense.](https://creativecommons.org/licenses/by-nc-sa/4.0/)_ 
happy printing

Head Vase

Cute vase for displaying flowers - create different hairstyles using different plants! 

Recommend printing with at least 4 perimeters and using PETg if you want it to hold water though they look great with dried or fake flowers in too!

Use supports from buildplate so the chin is supported, everything else will print fine without!

Truncated Octahedron Tealight Holder

This design is part of a set of Tealight Holders derived from mathematical surfaces and lattices. 

The Tealights will print without supports, but you may want to ensure your machine is well calibrated for bridging and that you are getting good layer adhesion.

See here for video: https://youtu.be/ApTyuPGk7EQ


Cupcake #1

Cupcake.stl

Pen holder

A 3D printable pencil holder with square texture.

Enjoy and have fun 3D printing!

Printing In Progress Sign

Printing In Progress.SLDPRT

wavy bowl (vase mode)

An easy to print wavy bowl to be printed in vase/spiralize mode

model in photos is printed in GNVTNTP magic PLA

Melted Popsicle USB Holder

Melted Popsicle USB Holder.STEP

incense holder 

a simple incense holder.
scaling: 100%
nozzle: 0,4
layer height: 0.2 
wall line count: 2
infill: 10%
support: No



this model is licensed under_[ theCreative Commons - Attribution - Non-Commercial - Share Alikelicense.](https://creativecommons.org/licenses/by-nc-sa/4.0/)_

happy printing

Mario Can Cup - Workspace challenge

this is my entry to the #ThangsWorkspace challenge, I turned the Blank Can [Cup](https://thangs.com/designer/MandicReally/3d-model/Blank%20Can%20Cup%20-%20Workspace%20Challenge%20Base!!-67884) model by MandicReally, into a warp pipe can cup.


 

Mario Can Cup 

Good Boy Organizer

Good Boy Organizer.STEP

RandoVase

I present to you my first ever **_RandoVase_**!
Tried to give it a simple and classic look.
Hope you'll enjoy printing it! ☺️

_If you want to take part to the Wavey Wednesday party, be sure to print and show yours together with the whole community in that occasion by using the hashtag **#WaveyWednesday** in your social posts! 😃

⸻⸻⸻⸻⸻⸻⸻⸻
𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :
. 3D Printer: Anycubic Mega S (RandoVase)
. Nozzle: 0.6 mm
. Slicer: Cura 4.13.1
. Layer height: 0.3 mm (2 wall thickness; 0 top/ 4 bottom layers)
. Infill : 0%
. No support needed
. Printing Temperature: 210°C / Build Plate Temperature: 60°C
. Print speed: 40 mm/sec / Outer Wall Speed: 30mm/s
. Filament: Silk Gold PLA by SUNLU
. Size: 9,2 x 9,2 x 12 cm (X,Y,Z)


_You can print both models using standard mode (be sure to use 0 top layers and 0% infill if you go with standard mode)
or in Vase Mode._

⸻⸻⸻⸻⸻⸻⸻⸻
Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here:_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

RandoBowl

I present to you my first ever **_RandoBowl_**!
Tried to give it a simple and classic look.
Hope you'll enjoy printing it! ☺️

_If you want to take part to the Wavey Wednesday party, be sure to print and show yours together with the whole community in that occasion by using the hashtag **#WaveyWednesday** in your social posts! 😃

⸻⸻⸻⸻⸻⸻⸻⸻
𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :
. 3D Printer: Fokoos Odin-5 F3
. Nozzle: 0.4 mm
. Slicer: Cura 4.13.1
. Layer height: 0.24 mm (2 wall thickness; 0 top / 4 bottom layers)
. Infill : 0%
. No support needed
. Printing Temperature: 210°C / Build Plate Temp: 55°C
. Print speed: 40 mm/sec / Outer Wall Speed: 30mm/s
. Filament: Sea Glass Rainbow TPU by Eryone
. Size: 9,3 x 9,3 x 6 cm (X,Y,Z)


_You can print both models using standard mode (be sure to use 0 top layers and 0% infill if you go with standard mode)
or in Vase Mode._

⸻⸻⸻⸻⸻⸻⸻⸻
Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here:_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

Crayon Man

Crayon Man.STEP

Intricate Patterned Vase

Inspired by depression glass, this is an intricate but easy to print design.

It's designed to be printed in vase/spiralise mode so no supports etc. needed

Print in the photos is printed using FiloAlfa Tigre PLA

YU mirror, SKU. 14287 by Pikartlights

YU mirror, SKU. 14287 by Pikartlights
Material: leather, brass, mirror, steel
Made in Ukraine
https://pikartlights.com/shop/decor/mirrors/dzerkalo/

Desk Buddy

Desk Buddy.STEP

Mini Plant Pot

Planter Case without Logo.stl

Coat Rack or Key Hanger

A very simple coat rack/key hanger depending on how you scale it. Scaling it up to 250mm long will just fit diagonally on an Ender 3 pro bed and makes a good coat rack size. Scaling it down to 100mm long is a perfect little key holder size. 

I also posted this over on [Thingiverse](https://www.thingiverse.com/thing:5376773). So if you have seen that model that is also me I am just re-posting it here as well. 

Home

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

castle tower pen holder

Head Vase

View 14 new models

Cupcake #1

Pen holder

Printing In Progress Sign

wavy bowl (vase mode)

Melted Popsicle USB Holder

incense holder

Mario Can Cup - Workspace challenge

Good Boy Organizer

RandoVase

RandoBowl

Crayon Man

Intricate Patterned Vase

View 95 new models

Desk Buddy

Mini Plant Pot

Coat Rack or Key Hanger

Modern Arch Vase