Tronco | Vase

Tronco vase.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (trunk.stl) modifying in the shell section of the slicer the following parameters:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (you can increase it if you want thicker walls)

(Recommended layer height of about 0.2 mm and green matte PLA)

Dama | Vase

Vase model Dama.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model by modifying the following parameters in the shell section of the slicer:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (you can increase it if you want thicker walls)

(Recommended layer height of about 0.2 mm and PLA matte lady)

Girasol | Vase

Sunflower vase.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (girasol.stl) modifying in the shell section of the slicer the following parameters:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (you can increase it if you want thicker walls)

(Recommended layer height of about 0.2 mm and orange matte PLA)

Vortice | Vase

Vase model Vórtice.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (vortice.stl) modifying in the shell section of the slicer the following parameters:
- Top layers: 0
- Bottom Layers: 5 (minimum)
- Wall line count: 3 (you can increase it if you want thicker walls)

Or simply (and recommended) use the vase mode.

(Recommended layer height of about 0.2 mm and purple matte PLA)

Flome V3

flomev3.stl

Perla | Vase

Vase model Perla.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (perla.stl) modifying in the shell section of the slicer the following parameters:
- Top layers: 0
- Bottom Layers: 5 (minimum)
- Wall line count: 3 (you can increase it if you want thicker walls)

Or simply (and recommended) use the vase mode.

(Recommended layer height of around 0.2 mm
PLA matt white or light grey)

Arrecife vase

arrecife.stl

Materia negra | Vase

Vase model Materia negra.

Ideal for decoration, as well as being a useful vase to place flowers or anything you wish.

Inspired by a curious geometry that recalls the growth and transformation of black matter.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model modifying in the shell section of the slicer the following parameters:
- Top layers: 0
- Bottom Layers: 5 (minimum)
- Wall line count: 3 (you can increase this if you want thicker walls)

Or simply (and recommended) use the vase mode.

(Recommended layer height of about 0.2 mm and matte black PLA)

Flower Totems

flower_inS.stl

Burbuja | Vase

Vase model Burbuja.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (burbuja.stl) modifying in the shell section of the slicer the following parameters:
- Top layers: 0
- Bottom Layers: 5 (minimum)
- Wall line count: 3 (you can increase it if you want thicker walls)

Or simply (and recommended) use the vase mode.

(Recommended layer height of about 0.2 mm and blue matte PLA)

burbuja.stl

Tetrabrik Vase

tetrabrik_open.stl

Fumarola | Vase

Vase model Fumarola.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (fumarola.stl) by modifying the following parameters in the shell section of the slicer:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (you can increase it if you want thicker walls)

Or simply (and recommended) use the vase mode.

(Recommended layer height of about 0.2 mm and matte red PLA)

Magma | Vase

Magma vase.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (magma.stl) modifying in the shell section of the slicer the following parameters:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (can be increased if you want thicker walls)

(Recommended layer height of about 0.2 mm and black matte PLA)

HOUSEDECOR

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Tronco | Vase

Dama | Vase

Girasol | Vase

Vortice | Vase

Flome V3

Perla | Vase

Arrecife vase

Materia negra | Vase

Flower Totems

Burbuja | Vase

Tetrabrik Vase

Fumarola | Vase

Magma | Vase

Elegant Easter Egg Wall Decor B (2 Files)