**Vase Mode, No Supports, Quick Print**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints**  

**Check out a spookier pendant light here
Faces of Death - Pendant Light, Vase Mode: https://than.gs/m/1046980**

The Flustra (Fluss-truh) Pendant Light brings a modern vibe with a subtle twist

The clean, ribbed design complements a wide range of aesthetics, while the ripples underneath evoke a more dynamic sense of motion.


**Model Details:**
You can start printing this model right away on a Bambu printer using the prepared 3mf file optimized for printing this model.

This model is designed to fit this Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Assembly Instructions**
Refer to the video in the image carousel

**Other Home Decor:**
**The Hestra - Pendant Light, Vase Mode: https://than.gs/m/1042357
The Trysta - Pendant Light, Vase Mode: https://than.gs/m/1042457
The Stria - Pendant Light, Vase Mode:   https://than.gs/m/1042321
The Scura - Pendant Light, Vase Mode: https://than.gs/m/1046091**



**Safety First**
Intended for use with **9 watt LED Lights**  
Other lights can get too hot and damage/deform the plastic

**Print Settings:**
Vase Mode/Spiralize/Spiral Vase Mode
0.55 mm wall thickness
8 bottom shell layers
Print with the circular cut-out on the build plate

**100% Scale**
Attempting to scale this model up or down will prevent the opening from fitting the intended Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

Please let me know if you would like to see other variations of this lamp.


The Flustra - Vase Mode Pendant Light (Large), STL & Bambu 3MF

The Flustra - Vase Mode Pendant Light (Large)_Bambu by Mimetics3D.3mf

Add a touch of nostalgia to your desk with this retro typewriter-shaped sticky note dispenser. It holds accordion-style sticky notes, so you always have one ready to grab. The keyboard isn’t just for looks as it works as a fidget-friendly clicker for those moments when you need to stay focused.

It’s easy to assemble with no complicated setup. Just snap the parts together and you’re good to go. Designed to work with both AMS and non-AMS printers, it’s a fun and functional addition for writers, office workers, and anyone who loves unique desk accessories.

A great mix of style, practicality, and a little fidget-friendly fun!

**With options for both AMS and non-AMS printing, it's flexible and easy to assemble!**

**Print Settings**
- A brim isn't required but I recommend using it for the top and bottom components to prevent curling along the edges
- No supports needed
- 10% infill
- 2-3 walls
- 0.4mm nozzle
- 0.08mm layer height for the "Click and Jot" signage, 0.2mm layer height for everything else
Use 3MF file if you want to use your AMS

**Items Used**
Orange: https://www.matterhackers.com/store/l/listing/sk/ME4CUFC6?aff=7646
Dark Yellow: https://amzn.to/4fEIxYf
Terracotta: https://www.matterhackers.com/store/l/pro-series-pla/sk/MZEZCLYH?aff=7646
White: https://amzn.to/3CbNBFa
Gold: https://amzn.to/4ioZfMX
Copper: https://amzn.to/4kCyW7v
Tan: https://www.matterhackers.com/store/l/pro-series-pla/sk/MZE7T0ST?aff=7646
Red: https://amzn.to/4ioZozZ
Sticky Note: https://amzn.to/4kDwC04
Kailh Jade Switch: https://amzn.to/3Y5lbE3

**Assembly Video:** https://youtu.be/cgcJEPiv4Lw

Retro Typewriter Sticky Note Dispenser – Fidget Clicker Keyboard, Easy Desk Organizer

pixelandpapier__typewriter_note_dispenser__top.stl

Add a touch of holiday magic with the Holiday Custard! ✨

Part of my "12 Days of Holiday Desserts" series, this custard container is perfect for storing tiny treasures or adding a festive, playful vibe to your decor. It's functional, fun, and a little piece of holiday joy you can print at home!

**Whether you're using an AMS or non-AMS printer, I’ve made it easy to print with options for both.**

**Print Settings**
- A brim isn't necessary but I like using it 
- Supports aren’t needed if the top is printed with the flat part on the build plate. Refer to the 3MF file for orientation..
- 10% infill
- 2-3 walls
- 0.4mm nozzle
- 0.12mm to 0.2mm layer height
- Use 3MF file if you want to use your AMS

**PLA Used:**
Pink: https://amzn.to/3CbNBFa
Peach: https://amzn.to/3UywLqh
Sage Green: https://amzn.to/48t2JK4
Dark Yellow: https://amzn.to/4fEIxYf

**Assembly:**
https://youtu.be/ls6QJfQ_ffo


Holiday Custard Container - Jewelry Box and Gift Holder - 3/12 Holiday Desserts

pixelandpapier__holiday_custard__bottom.stl

**Support My Work**
If you appreciate my designs and would like to support my work, or if you're interested in purchasing individual models instead of a subscription, here are some options available:

Cults3D: [Purchase individual models here](https://cults3d.com/en/users/fulv/3d-models)
Thank you for your support! If you have any questions, feel free to reach out.

**Overview**
Introducing The Haunted Manor, a stunningly detailed Georgian-style manor that captures the essence of spooky elegance! Complete with intricate gargoyles, eerie skulls, fluttering bats, and textured walls, this model is designed to delight and enchant for years to come.

**Design Features**
- Intricate Details: Every corner of the manor is adorned with gothic motifs, from the fierce gargoyles to the spooky bat accents, ensuring a captivating visual experience.
- Customizable Garden: Choose from three distinct tree types to personalize your spooky landscape: Dead Trees for a ghostly atmosphere, Pumpkin Trees that add a festive touch. or Topiary Trees featuring bases of skulls or pumpkins.
- Lighting Options: The model includes two adapter options for easy integration of lighting: LED Strip Light Adapter for subtle illumination or ToolMoon Light Bulb Adapter for a more pronounced glow.

Detailed instructions for lighting setup are provided in the accompanying PDF.

**Printing Specifications**
- Easy to Print: Designed for effortless printing with minimal support, with only a few small organic/tree components needing slight support.
- File Compatibility: Includes .3mf project files optimized for Bambu Lab Studio and PRUSA Slicer, with color settings pre-configured for your convenience.
- Project Files Included: .3mf files for both Bambu Lab Studio and PRUSA Slicer come pre-configured with color changes and settings for your convenience.
- Manual Color Change Guidance: If you use a different printer or slicer, a PDF document details when to change colors during printing.
- Single Extruder Compatibility: For those without an AMS system, step-by-step instructions for manual layer color changes with a single-color printer are provided.

**Assembly Instructions**
- Comprehensive Guidance: Full assembly instructions are included in both printable PDF format and interactive animated CADASIO instructions, easily accessible from any browser.
- Color Change Guidance: For those without an AMS system, a step-by-step guide for manual color changes with a single extruder printer is provided.

**Model Dimensions**
- When fully assembled (including the base), The Haunted Manor measures approximately: 271.8mm (10.7in) x 372mm (14.6in) x 292mm (11.5in)
- Minimum Print Bed Size: Everything fits well on a bed of at least 235 x 205 x 200 mm or larger.

**Material Recommendations**
A list of recommended Polymaker materials is included for optimal results, ensuring your print captures the model’s stunning details.

**3D printing settings**
Link to buy Polymaker filaments in the USA:
[https://us.polymaker.com?aff=824](https://us.polymaker.com?aff=824)

**Support**
If you have any questions or need assistance, feel free to reach out. I’m always here to help!

**Happy Printing!**
Bring home the magic of The Haunted Manor and let your creativity shine through every spooky detail! 🎃👻

Videos:
[https://youtu.be/R6K5NPXV54Q](https://www.youtube.com/watch?v=R6K5NPXV54Q)
[https://youtu.be/a-S-ucEr41w?si=SMX5Rjkl3RnCmE17](https://youtu.be/a-S-ucEr41w?si=SMX5Rjkl3RnCmE17)
[https://youtu.be/AxCOKnsFfLA?si=Kj5g2lq9YvFjomrJ](https://youtu.be/AxCOKnsFfLA?si=Kj5g2lq9YvFjomrJ)

The Haunted Manor

MAIN HOUSE -v01.stl

**Free for personal use for a short period of time**

**Looking for Commercial Use?**
If you're interested in using this design for commercial purposes, please purchase my 'Early Adopter' or 'Maker' subscription. The subscription gives you the commercial licenses needed to sell physical items made from these designs.

Unleash the spirits with the Elixir potion bottle, a key piece of our Retro Halloween Potion Bottle set which also includes the Phantom Brew and Love Potion. This eerie vessel is adorned with mysterious motifs and a haunting skull, perfect for adding a ghostly touch to your decor. Whether displayed on its own or as part of our potion bottle collection, it's sure to conjure an atmosphere of spooky elegance in any setting.

See the other two designs here:
- https://than.gs/m/1135425
- https://than.gs/m/1139323

**Print Settings:**
- No brim required
- No support needed
- 10% infill
- 2-3 walls
- 0.4mm nozzle
- 0.12 - 0.2mm layer height

**Assembly:**
Watch the video here:
https://youtu.be/Q89arZqS2Dc

**Items Used:**
- Pastel Periwinkle PLA: https://amzn.to/3B677Cm

Skull Elixir Bottle - Part of the Retro Halloween Potion Bottle Set

pixelandpapier__potion__bottle.stl

**Vase Mode, No Supports, Quick Print**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints**  

 
**Check out the latest 3 table lamps here:
Stria Table Lamp: https://than.gs/m/1049903
Trysta Table Lamp: https://than.gs/m/1049896
Hestra  Table Lamp: https://than.gs/m/1049906**


_Twisting waves of passion move beneath your calm, organized exterior.  The Hestra is for you_
 
The Hestra (Hess-truh) Table Lamp brings a modern vibe with a subtle twist

The clean, ribbed design complements a wide range of aesthetics, while the six underlying waves evoke a more dynamic sense of motion.

_Why hide who you are?  Let your passion shine through_



**Model Details:**
You can start printing this model right away on a Bambu printer using the prepared 3mf file optimized for printing this model.

This model is designed to fit this Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Assembly Instructions**
Refer to the video in the image carousel

**For some fun pendant lights, check out:
Faces of Death - Pendant Light, Vase Mode: https://than.gs/m/1046980
The Flustra - Vase Mode Pendant Light (Large): https://than.gs/m/1047316**


**Safety First**
Intended for use with **9 watt LED Lights**  
Other lights can get too hot and damage/deform the plastic

**Print Settings:**
The lamp shad prints in Vase Mode/Spiralize/Spiral Vase Mode
The Base and cap print regularly without supports.  
**The base should be printed upside down**
0.55 mm wall thickness
8 bottom shell layers
Print with the circular cut-out on the build plate

**100% Scale**
Attempting to scale this model up or down will prevent the opening from fitting the intended Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

Please let me know if you would like to see other variations of this lamp.


Hestra Table Lamp - Vase Mode STL and Bambu 3MF

The Hestra - Vase Mode Pendant Light Bambu by Mimetics3D.3mf

**Vase Mode, No Supports, Quick Print**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints**  
 
**Check out the latest 3 table lamps here:
Stria Table Lamp: https://than.gs/m/1049903
Trysta Table Lamp: https://than.gs/m/1049896
Hestra  Table Lamp: https://than.gs/m/1049906**

_You cut a striking figure where the light and shadow meet.  To observe from just one angle leaves the picture incomplete_  

_The Trysta is for you_

The Trysta (Tris-tuh) Table Lamp graces each room with modern elegance.
 
The clean, ribbed design complements a wide range of aesthetics, while the vertical pattern both hides and accentuates the curves that lie within.

_What's holding you back?  Rendezvous with destiny_

**Model Details:**
You can start printing this model right away on a Bambu printer using the prepared 3mf files optimized for printing this model.

This model is designed to fit this Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Assembly Instructions**
Refer to the video in the image carousel

**For some fun pendant lights, check out:
Faces of Death - Pendant Light, Vase Mode: https://than.gs/m/1046980
The Flustra - Vase Mode Pendant Light (Large): https://than.gs/m/1047316**

**Safety First**
Intended for use with **9 watt LED Lights**  
Other lights can get too hot and damage/deform the plastic

**Print Settings:**
Vase Mode/Spiralize/Spiral Vase Mode for the Lamp Shade
Regular printing for the Base and Cap
0.55 mm wall thickness
8 bottom shell layers
Print with the circular cut-out on the build plate

**100% Scale**
Attempting to scale this model up or down will prevent the opening from fitting the intended Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

Please let me know if you would like to see other variations of this lamp.


Trysta Table Lamp - STL and Bambu 3MF

The Trysta - Vase Mode Pendant Light_Bambu by Mimetics3D.3mf

**Vase Mode, No Supports, Quick Print**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints** 

**Check out a spookier pendant light here
Faces of Death - Pendant Light, Vase Mode: https://than.gs/m/1046980**

_The sides of you others can't see convey a hint of mystery.  The Scura calls to you_
 
The Scura (Skyur-Uh) Pendant Light brings a modern vibe with a subtle twist

The clean design complements a wide range of aesthetics, while the broad, curved fins add a more dynamic sense of depth to the room.



**Model Details:**
You can start printing this model right away on a Bambu printer using the prepared 3mf file optimized for printing this model.

This model is designed to fit this Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

The Scura represents the fourth design in the Mimetics3D Home Decor collection.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Assembly Instructions**
Refer to the video in the image carousel

**Other Home Decor:**
**The Hestra - Pendant Light, Vase Mode: https://than.gs/m/1042357
The Trysta - Pendant Light, Vase Mode: https://than.gs/m/1042457
The Stria - Pendant Light, Vase Mode:   https://than.gs/m/1042321**

**Safety First**
Intended for use with **9 watt LED Lights**  
Other lights can get too hot and damage/deform the plastic

**Print Settings:**
Vase Mode/Spiralize/Spiral Vase Mode
0.55 mm wall thickness
8 bottom shell layers
Print with the circular cut-out on the build plate

**100% Scale**
Attempting to scale this model up or down will prevent the opening from fitting the intended Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

Please let me know if you would like to see other variations of this lamp.


The Scura - Pendant Light, Vase Mode Bambu 3MF

The Scura - Vase Mode Pendant Light_Bambu by Mimetics3D.3mf

**Vase Mode, No Supports, Quick Print**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints**  

**Check out a spookier pendant light here
Faces of Death - Pendant Light, Vase Mode: https://than.gs/m/1046980**

The Stria (Stry-uh) Pendant Light adds a touch of modern elegance to any room.
 
The clean, ribbed design complements a wide range of aesthetics.

You can start printing this model right away on a Bambu printer using the prepared 3mf file optimized for printing this model.
 
This model is designed to fit this Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

The Stria represents the first design in the Mimetics3D Home Decor collection.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Assembly Instructions**
Refer to the video in the image carousel

**Other Home Decor:**
**The Hestra - Pendant Light, Vase Mode: https://than.gs/m/1042357
The Trysta - Pendant Light, Vase Mode: https://than.gs/m/1042457
The Stria - Pendant Light, Vase Mode:   https://than.gs/m/1042321
The Scura - Pendant Light, Vase Mode: https://than.gs/m/1046091**

For some spookier decor check out:
**Faces Of Death Bowl - Skull Bowl - https://than.gs/m/1046122**

**Safety First**
Intended for use with **9 watt LED Lights**.  Other lights can get too hot and damage/deform the plastic

**Print Settings:**
Vase Mode/Spiralize/Spiral Vase Mode
0.55 mm wall thickness
8 bottom shell layers. 

100% Scale
Attempting to scale this model up or down will prevent the opening from fitting the intended Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

Please let me know if you would like to see other variations of this lamp.


The Stria - Pendant Light, Vase Mode 

Stria_PendantLamp_VaseMode_Bambu.3mf

The Kitsch Cake Book Stand holds your pages open, provides secret storage, and adds a fabulous touch to any space. Lift the removable lid to reveal a hidden compartment perfect for stashing glasses, hair ties or bobby pins, keeping your nightstand neat and clutter free. It also adds a playful touch to coffee tables or end tables. Ideal as a gift for any book lover!

**With options for both AMS and non-AMS printing, it's flexible and easy to assemble!**

**Print Settings**
- Add a brim to prevent curling along the edges
- No supports needed
- 10% infill
- 2-3 walls
- 0.4mm nozzle
- 0.2mm layer height

**PLA Used:**
- Jelly Red: https://amzn.to/4jlO34i or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-jred
- White: https://amzn.to/3FORvWl or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-wht
- Blush Pink: https://amzn.to/4lEBnad or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-mat-blpnk
- Sea Breeze: https://www.hatchbox3d.com/products/hb-pla-1kg1-75-sbrz

**Assembly Video:** https://youtu.be/kdfV9wU0PJs

Kitsch Cake Book Stand with Hidden Storage - Nightstand Decor Ideal Gift for Book Lovers

pixelandpapier__cake_book_stand__cake.stl

This heart shaped cake captures the nostalgic charm of Victorian cake piping, bringing timeless elegance straight into your home. I created this to celebrate Pixel and Papier’s first anniversary, my way of marking one sweet year of creativity and making my 3D files available to others!

I dedicated a great deal of time to ensure hassle-free printing: **no supports needed, and fully compatible with both AMS and non-AMS printers.**
Beyond being a visual delight, it also doubles as a lovely container for your treasured trinkets and keepsakes.

**Print Settings**
- Brim required (inner brim recommended)
- No supports required
- 15% infill
- 2–3 walls
- 0.4 mm nozzle
- 0.2 mm layer height
- Use the 3MF file if you plan to print with AMS

**PLA Used:**
- Jelly Red: https://amzn.to/4jlO34i or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-jred
- Blush Pink: https://amzn.to/4lEBnad or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-mat-blpnk
- Vivid Tangerine: https://amzn.to/42Towtk or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-mat-vtan
- Cantaloupe Orange: https://amzn.to/42sPcRm or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-mat-corn
- Matte Orange: https://amzn.to/3YhBrT5 or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-mat-orn
- White: https://amzn.to/3FORvWl or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-wht

**Assembly Video:**
https://youtu.be/rkqjKPIjkUk

Heart Cake Vintage Victorian Container: Decor, Keepsake, Gift, Retro, Kitsch

pixelandpapier__vintage_heart_cake__detail_piping.stl

I recently released my ‘Mega’ Magnetic Tile Haunted House Collection but have been wanting to make a playful, scaled down version - so here it is 👻 This is my ‘Mini’ Magnetic Tile Haunted House that is ¼ the scale of my original. For extra fun, many of the windows have 2-sided window panes that rotate, there's a skeleton that greets you behind a hinged front door, tombstones to decorate the front yard and all the spiders, cats, rats, ghosts and skeletons you can handle 🕷🎃🐈‍⬛🐀👻 (These tiles are compatible with store bought magnetic tiles just fyi:)

****3D Print Settings****
PLA Filament
Layer height 0.2mm (for some of the more detailed pieces - like the rat windows and tombstones you can use a 0.16 layer height if preferred)
Infill 15%
Brim may be needed on larger pieces (like the 150x75 walls) if you notice any warping

****Neodymium magnets needed: 20x5x2 ****

- I specifically designed all these pieces to work with this size magnet

- Here is a link to these magnets on Amazon: ****https://amzn.to/3Nibhd3****

- Magnetic build plate highly recommended but not absolutely necessary.


****Printing Instructions for Inserting Magnets and Filament Pieces:****

- Every piece in this collection (except for the Porch Pillars and the Chimney Cap) need to be paused at layer 30 (layer height 4.8mm) to insert magnets. 
- The Front Door piece and all the window panes that rotate also need cut pieces of filament placed in the ‘filament chamber’ areas (see photos and video). 
- It helps to straighten the filament pieces that will be inserted into these pieces.  I have designed a separate 3D printed device to do that (I call it the ‘filament straightening block’) and will link a video below.

- After the magnets/filament are inserted, resume printing

****I have also included a 3mf print profile with the following print plates:****
Print Plate #1 Mini HH_75X75_Front Door: 4 colors, pause at layer 30, cut and insert filament pieces to fit into filament chamber areas
Print Plate #2 Mini HH_75x75_Curved Cat & Ghost Window: 4 colors, pause at layer 30; cut and insert filament pieces to fit into filament chamber areas
Print Plate #3 Mini HH_75x75_Curved Spider & Ghost Window: 4 colors, pause at layer 30; cut and insert filament pieces to fit into filament chamber areas
Print Plate #4 Mini HH_75x75_Curved (Plain) Window: 3 colors, pause at layer 30
Print Plate #5 Mini HH_75x75_Rectangle Spider & Ghost Window: 4 colors, pause at layer 30; cut and insert filament pieces to fit into filament chamber areas
Print Plate #6 Mini HH_75x75_Rectangle Pumpkin & Ghost Window: ****5 colors!!****, pause at layer 30. Cut and insert filament pieces to fit into filament chamber areas.
This is the only piece with 5 colors. You will notice I colorized both the ghost and the pumpkin white.  After the white is done printing the ghost you will need to change out the white filament for orange before it starts printing the pumpkin.  Pause the print if needed to do this (on my Bambu printer I can do this while printing).
Print Plate #7 Mini HH_75x75_Rectangle (Plain) Window: 3 colors, pause at layer 30
Print Plate #8 Mini HH_75x37.5_Curved (Plain) Window: 3 colors, pause at layer 30
Print Plate #9 Mini HH_75x37.5_Curved Rat Window:3 colors, pause at layer 30; cut and insert filament pieces to fit into filament chamber areas
Print Plate #10 Mini HH_75x37.5_Plain Wall Panel: 1 color, pause at layer 30
Print Plate #11 Mini HH_150x75_Curved Skeleton & Ghost Window: 4 colors, pause at layer 30; cut and insert filament pieces to fit into filament chamber areas
Print Plate #12 Mini HH_150x75_Curved (Plain) Window: 3 colors, pause at layer 30
Print Plate #13 Mini HH_150x75_Tree Wall: 2 colors, pause at layer 30
Print Plate #14 Mini HH_75x75_Floor Piece: 1 color, pause at layer 30
Print Plate #15 Mini HH_75x37.5_Floor Piece: 1 color, pause at layer 30
Print Plate #16a Mini HH Front Porch: 1 color, pause at layer 30
Print Plate #16b Mini HH Porch Pillars: 1 color, pause at layer 30
Print Plate #17a Mini HH Tombstone Noah&RIP: 2 colors, pause at layer 30
Print Plate #17b Mini HH Tombstone Ben&Waldo: 2 colors, pause at layer 30
Print Plate #18 Mini HH Front Door Awning: 1 color, pause at layer 30
Print Plate #19 Mini HH_75x85_roof: 1 color, pause at layer 30
Print Plate #20 Mini HH_90x85_roof (no chimney): 1 color, pause at layer 30
Print Plate #21a Mini HH_90x85_roof with chimney: 1 color, pause at layer 30
Print Plate #21b Mini HH Chimney Cap: 1 color, pause at layer 30

Have fun printing!

Mini Magnetic Tile Haunted House Collection

(21a) Mini HH_90x85_roof with chimney.stl

Unleash the spirits with the Phantom Brew potion bottle, a key piece of our Retro Halloween Potion Bottle set which also includes the Elixir and Love Potion. This eerie vessel is adorned with mysterious motifs and a haunting skull, perfect for adding a ghostly touch to your decor. Whether displayed on its own or as part of our potion bottle collection, it's sure to conjure an atmosphere of spooky elegance in any setting.

See the other two designs here:
- https://than.gs/m/1135425
- https://than.gs/m/1141593

**Print Settings:**
- No brim required
- Support required for the label, no support is required for any other parts
- 10% infill
- 2-3 walls
- 0.4mm nozzle
- 0.12mm layer height for the label, 0.12 - 0.2mm layer height everywhere else
- Use 3MF file if you want to use your AMS for the colored label

**Assembly:**
Watch the video here:
https://youtu.be/Q89arZqS2Dc

**Items Used:**
- Mint Green PLA: https://amzn.to/3XqnMrQ
- Peach PLA: https://amzn.to/47qHgAY
- White PLA: https://amzn.to/3ZqMtXz
- Black PLA: https://amzn.to/3Xk8xR6

Skull Phantom Brew - Part of the Retro Halloween Potion Bottle Set

pixelandpapier__potion_2__bottle.stl

| **Visit** [JERRARI.com](https://www.jerrari3d.com/) for **Instructions** and a complete look at the GEN2 collection 
_______________________

The EdgeMetal Series is a collection of drawer faceplates for the **GEN2 Decor Series**. Simply print the drawer bodies from one of the Base Drawer Models, and slide your personalized faceplate in place. Lock in place by mounting a printable handle with a M3 screw and nut.

The EdgeMetal series has a strong sharp look unlike anything else. Printed in a highly reflective filament, the angled corners generate an striking appearance. Print as one solid color or experiment with multicolor printing for some really fascinating results.

**What You'll Need**
 
**BASE DRAWER MODELS**
• GEN2 Decor Drawers - Standard - [DOWNLOAD](https://than.gs/m/1116945)
 
**HANDLE/KNOBS**
• BlockBar Series - [DOWNLOAD](https://than.gs/m/1116949)
• Crystal Series - [DOWNLOAD](https://than.gs/m/1134382)

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Silk Silver PLA](https://amzn.to/4g88Hn8) (this is what I used in many of my photos)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)

**INSTRUCTIONS**
• Print the model laying face up, no supports needed
• Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.



GEN2 Decor - Faceplate - EdgeMetal

EdgeMetal - Single - 44mm Handle.stl

**This 3D design is for personal use only if purchased individually. To obtain the rights for commercial sale, you must join the Commercial Maker Thangs Membership.**

Get ready to celebrate Halloween in retro style with the Halloween Advent Calendar! Designed with a midcentury horror kitsch vibe, this advent calendar is perfect for loading up with your favorite treats—whether it’s candy, spooky trinkets, or other fun surprises. Each day reveals a new delight, making the countdown to Halloween even more exciting!

What’s even better? You don’t have to add numbers if you prefer to use it as a a spooky drawer decor piece!

I’ve put a lot of love into crafting this design, inspired by the bold, nostalgic decor of the past. It’s a fun and unique way to add a touch of vintage charm to your Halloween celebrations!

**Quantity of Each Item to Print for Halloween Advent Calendar**
- Type A Shelf Piece: 1
- Type B Shelf Pieces: 5
- Type C Shelf Piece: 1
- Digit 0: 13
- Digit 1: 14
- Digit 2: 14
- Digit 3: 5
- Digits 4-9: 3
- Small Drawers: 30
- Large Drawer: 1
- Skulls: 31

**Optional Components**
C-Clips: 12 (only if using the clipping method for assembly)

**Print Settings**
- I recommend using a brim for large items with corners to prevent warping.
- No supports needed for printing. To see the best printing orientation, check the .3mf file
- 10% infill
- 2-3 walls
- 0.4mm nozzle
- 0.12mm layer height for the drawers and numbers. 0.12mm to 0.2mm for the shelves

**Assembly**
Watch the assembly here: 
https://youtu.be/JU5uE7ZXDKc

**PLA Used Here:**
Polymaker Peach: https://amzn.to/3ZcBEs6
Polymaker Periwinkle: https://amzn.to/4cQx5ac
Matterhacker Orange: https://www.matterhackers.com/store/l/175mm-pla-filament-orange-1-kg/?aff=7646
Polymaker Muted Red: https://amzn.to/3Za9EVW
Elegoo Black: https://amzn.to/3MwGKIg

Halloween Advent Calendar – Treat Countdown Box or Drawers for Spooky Retro Home Decor

pixelandpapier__halloween_advent__small_drawer.stl

pixelandpapier__halloween_advent__AMS.3mf

Visit [JERRARI3D.com](https://www.jerrari3d.com/)  
For instructions and a complete look at the entire GEN2 collection.  
__________________________________________________

### The GEN2 Modular System
The GEN2 Modular System is a 3D printable storage solution offering ultimate flexibility and customization. Perfect for home users, hobbyists, and small businesses, it lets you print exactly what you need and customize each piece to match your unique style and space.  

Unlike store-bought sets, GEN2 lets you print only what you need and expand your setup whenever you want. The drawers snap together seamlessly, giving you unlimited expansion possibilities. With the unique QuickLock mechanism, rearranging or relocating drawers is quick and effortless—so your storage can grow and adapt with you.  

---

### GEN2 Chevron Series
Where 3D printing meets home design, bringing the signature GEN2 modular system into spaces beyond the workshop. With its clean, angled pattern and subtle texture, the Chevron faceplate adds a modern, furniture-like touch whether it’s organizing coffee pods, craft supplies, or small tools.  

Designed for full customization, each faceplate supports your choice of handle or knob attached with standard M3 screws, letting you tailor both function and style. From carbon-fiber-infused prints that pop on a workbench to soft neutral tones that complement a kitchen counter, the Chevron Series proves that 3D-printed storage can look at home anywhere.  

---

### What You’ll Need
**BASE DRAWER MODELS**  
• GEN2 Decor Drawers – Standard – [DOWNLOAD](https://than.gs/m/1116945)  

**HANDLES / KNOBS**  
• BlockBar Series – [DOWNLOAD](https://than.gs/m/1116949)  
• Crystal Series – [DOWNLOAD](https://than.gs/m/1134382)  
• Deco Handle / Knob Collection – [DOWNLOAD](https://than.gs/m/1159960)  

**HARDWARE**  
Includes affiliated links to help support my projects:  
• Filament – [Poplar Wood Filament](https://amzn.to/3X0rYzz) (used in many of my photos). Use a hardened nozzle for abrasive filaments.  
• M3 nuts and screws – Stainless-Steel or Steel (screw length may vary depending on your faceplate and drawer combo—kits like [this one](https://amzn.to/3LSaQFv) offer a variety of lengths to help you find the perfect fit).  

---

### Optional Accessories
Take your Decor setup even further with compatible accessories and inserts:  
• K-Cup Insert – Perfect for coffee stations and home setups – [DOWNLOAD](https://than.gs/m/1159960)  
• Additional GEN2 Decor Add-ons – Organizers, inserts, and new modules are always being added at [JERRARI3D.com](https://www.jerrari3d.com/).  

---

### Instructions
1. Push M3 nuts into the slots on handles or knobs.  
2. Slide the faceplate into position on your GEN2 Decor Drawer.  
3. Insert an M3 screw from inside the drawer, through the faceplate, and into the handle’s nut to secure it in place.  

*Note:* Some handle designs include self-tapping screw versions, so M3 nuts are not always required.  

---

### Slicing Tips
Both 3MF and STL files are included.  
- The 3MF file is pre-sliced and ready to print (just select your printer).  
- When using the STL file, split it into parts for multi-color printing.  
- Works in PrusaSlicer, Bambu Studio, and similar slicers.  
- Prints face down for textured build plates or face up—no supports required.  

---

### Updates
**2025-10-04** – Recreated all models from the ground up to support the latest faceplate design, now compatible with all Decor Drawer sizes including 3W and 4W units.  

---

### License
The Non-Commercial license applies only to selling printed models.  
You’re absolutely welcome to use my designs in commercial environments—I actually encourage you to use them anywhere you see fit! 👍  


GEN2 Decor - Faceplates - Chevron

1W-1H - V2 - Handle.stl

1W-2H - V2 - Handle.stl

1W-05H - V2 - Handle.stl

1W-15H - V2 - Handle.stl

2W-1H - V2 - Handle.stl

2W-2H - V2 - Handle.stl

2W-05H - V2 - Handle.stl

2W-15H - V2 - Handle.stl

3W-1H - V2 - Handle.stl

3W-05H - V2 - Handle.stl

4W-1H - V2 - Handle.stl

4W-05H - V2 - Handle.stl

1W-1H - V2 - Handle.3mf

1W-2H - V2 - Handle.3mf

1W-05H - V2 - Handle.3mf

1W-15H - V2 - Handle.3mf

2W-1H - V2 - Handle.3mf

2W-2H - V2 - Handle.3mf

2W-05H - V2 - Handle.3mf

2W-15H - V2 - Handle.3mf

3W-1H - V2 - Handle.3mf

3W-05H - V2 - Handle.3mf

4W-1H - V2 - Handle.3mf

4W-05H - V2 - Handle.3mf

1W-1H - V2 - Knob.stl

1W-2H - V2 - Knob.stl

1W-05H - V2 - Knob.stl

1W-15H - V2 - Knob.stl

2W-1H - V2 - Knob.stl

2W-2H - V2 - Knob.stl

2W-05H - V2 - Knob.stl

2W-15H - V2 - Knob.stl

3W-1H - V2 - Knob.stl

3W-05H - V2 - Knob.stl

4W-1H - V2 - Knob.stl

4W-05H - V2 - Knob.stl

1W-1H - V2 - Knob.3mf

1W-2H - V2 - Knob.3mf

1W-05H - V2 - Knob.3mf

1W-15H - V2 - Knob.3mf

2W-1H - V2 - Knob.3mf

2W-2H - V2 - Knob.3mf

2W-05H - V2 - Knob.3mf

2W-15H - V2 - Knob.3mf

3W-1H - V2 - Knob.3mf

3W-05H - V2 - Knob.3mf

4W-1H - V2 - Knob.3mf

4W-05H - V2 - Knob.3mf

**Vase Mode, No Supports, Quick Print**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints** 

For a bowl version, check out:
**Faces Of Death Bowl - Skull Bowl - https://than.gs/m/1046122**

For another fun pendant light:
**The Flustra - Vase Mode Pendant Light (Large): https://than.gs/m/1047316**

 
The Faces of Death Pendant Light brings a touch of the macabre to any room



**Model Details:**
You can start printing this model right away on a Bambu printer using the prepared 3mf file optimized for printing this model.

This model is designed to fit this Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Assembly Instructions**
Refer to the video in the image carousel

**Other Home Decor:**
**The Hestra - Pendant Light, Vase Mode: https://than.gs/m/1042357
The Trysta - Pendant Light, Vase Mode: https://than.gs/m/1042457
The Stria - Pendant Light, Vase Mode:   https://than.gs/m/1042321
The Scura - Pendant Light, Vase Mode: https://than.gs/m/1046091**

**Safety First**
Intended for use with **9 watt LED Lights**  
Other lights can get too hot and damage/deform the plastic

**Print Settings:**
Vase Mode/Spiralize/Spiral Vase Mode
0.55 mm wall thickness
8 bottom shell layers
Print with the circular cut-out on the build plate

**100% Scale**
Attempting to scale this model up or down will prevent the opening from fitting the intended Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

Please let me know if you would like to see other variations of this lamp.


Faces of Death - Vase Mode Pendant Light, Bambu 3MF

Faces of Death - Vase Mode Pendant Light_Bambu by Mimetics3D.3mf

**Vase Mode, No Supports, Quick Print**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints**  

**Check out a spookier pendant light here
Faces of Death - Pendant Light, Vase Mode: https://than.gs/m/1046980**

_You cut a striking figure where the light and shadow meet.  To observe from just one angle leaves the picture incomplete_  

_The Trysta is for you_

The Trysta (Tris-tuh) Pendant Light graces each room with modern elegance.
 
The clean, ribbed design complements a wide range of aesthetics, while the vertical pattern both hides and accentuates the curves that lie within.

_What's holding you back?  Rendezvous with destiny_

**Model Details:**
You can start printing this model right away on a Bambu printer using the prepared 3mf file optimized for printing this model.

This model is designed to fit this Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

The Trysta represents the third design in the Mimetics3D Home Decor collection.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Assembly Instructions**
Refer to the video in the image carousel

**Other Home Decor:**
**The Hestra - Pendant Light, Vase Mode: https://than.gs/m/1042357
The Trysta - Pendant Light, Vase Mode: https://than.gs/m/1042457
The Stria - Pendant Light, Vase Mode:   https://than.gs/m/1042321
The Scura - Pendant Light, Vase Mode: https://than.gs/m/1046091**

**Safety First**
Intended for use with **9 watt LED Lights**  
Other lights can get too hot and damage/deform the plastic

**Print Settings:**
Vase Mode/Spiralize/Spiral Vase Mode
0.55 mm wall thickness
8 bottom shell layers
Print with the circular cut-out on the build plate

**100% Scale**
Attempting to scale this model up or down will prevent the opening from fitting the intended Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

Please let me know if you would like to see other variations of this lamp.


The Trysta - Vase Mode Pendant Light with Bambu 3MF

The Trysta - Vase Mode Pendant Light_Bambu by Mimetics3D.stl

Simple drawer handle with aesthetically pleasing design. Handle swivels up/down and helps hide the screw holes. Entire design is only half an inch thick with rounded corners so it does not catch onto clothing. 

Swivel Drawer Handle

Drawer Handle (1).stl

I added Santa Claus as a movable gingerbread series. This time it changed from the previous movable gingerbread(gingerbread man and girl).

Many modifications were necessary to express Santa's fat body.
It was very difficult to adjust the angle so that the beard did not touch the body.
Changed the direction of rotation of the arms to allow a more natural pose.
The detachable hat is designed to fit into other movable gingerbread. Santa hats must be glued to prevent them from falling out.
Print with Prusa - https://youtu.be/NAgWC0RBjtg
Print with Ender3 pro - https://youtu.be/AdZj5bWZWq4

We wish you a Merry Christmas with this gingerbread Santa Claus.
Merry Christmas ~

size = X 69mm, Y97mm, Z 24mm

Design by GOODesign

Movable gingerbread Santa Claus

GOODesign_Movable Gingerbread Santa Claus.stl

HOME

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

The Flustra - Vase Mode Pendant Light (Large), STL & Bambu 3MF

Retro Typewriter Sticky Note Dispenser – Fidget Clicker Keyboard, Easy Desk Organizer

Holiday Custard Container - Jewelry Box and Gift Holder - 3/12 Holiday Desserts

The Haunted Manor

Skull Elixir Bottle - Part of the Retro Halloween Potion Bottle Set

Hestra Table Lamp - Vase Mode STL and Bambu 3MF

Kitsch Cake Book Stand with Hidden Storage - Nightstand Decor Ideal Gift for Book Lovers

Heart Cake Vintage Victorian Container: Decor, Keepsake, Gift, Retro, Kitsch

Mini Magnetic Tile Haunted House Collection

GEN2 Decor - Faceplate - EdgeMetal

Halloween Advent Calendar – Treat Countdown Box or Drawers for Spooky Retro Home Decor

Swivel Drawer Handle

Movable gingerbread Santa Claus