Teacup Frog Clicker Keychain Fidget Toy

TEACUP FROG - BASE (LEAF).stl

Zombie Head (Pre-Supported)

ZombieHead.stl

"Boo" Spinner Fidget Keychain 

A Halloween spinner/keychain made from the word "Boo."  This model prints in place quickly and with no supports needed.  It features independently spinning hoops embedded in the O's of Boo and a built-in hole for a keychain.  I used a multi-color printer to get the different colored embedded hoops.  

**Printing Info:**
**These are just the settings I used to test the model, feel free to use whatever settings work best for you.
- FDM or Resin: FDM or Resin
- Scaling: Can be scaled up, scaling down may not work well.
- Supports: None
- Infill/Perimeters: I just used 10% infill with 2 perimeters, but I would use extra perimeters for more strength.
- Nozzle Size: 0.4
- Layer Height: 0.2

**Printing Assembly:**
Just slice and print, no supports needed.  The embedded hoops in the O's should spin freely.

STL List (1):
- boo_spinner_keychain

Gear Jack-O-Lantern

All.stl

Glaceon halloween - Pokemon - Fan Art

Bobblehead Bat Keychain

Leafeon Halloween - Pokemon - Fan Art

Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Medium** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Long Bony Basilisk:**
https://than.gs/m/936921
**Loose Tolerance Long Bony Basilisk:**
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Long Bony Basilisk, be sure to check out it’s cute younger sibling, the Short Bony Basilisk:

**Tight Tolerance Short Bony Basilisk:**
https://than.gs/m/936954
**Medium Tolerance Short Bony Basilisk:**
https://than.gs/m/937047
**Loose Tolerance Short Bony Basilisk:**
https://than.gs/m/937048

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

HALLOWEEN

Most Popular Paid of All Time

Categories

Paid

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Teacup Frog Clicker Keychain Fidget Toy

Zombie Head (Pre-Supported)

"Boo" Spinner Fidget Keychain

Gear Jack-O-Lantern

Glaceon halloween - Pokemon - Fan Art

Bobblehead Bat Keychain

Leafeon Halloween - Pokemon - Fan Art

Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints)

Cute articulated gecko halloween - totem design

Void Reaper: Dementor Inspired Wall Art/Hanger (Support-Free)

Zombie Charmander

Magic cloth shelf

Batman Beyond - Bust - Fan Art

Halloween Flexi Frankenstein V2

Halloween Flexi Cat

Gear Jack-O-Lantern

Nightmare Before Christmas - Fountain Lamp / Incense Holder

12oz Gunslinger Can Cozy Dice Tower

Pumpkaboo

Spooky Skeleton Dog – 3D Printable Halloween Pet