A Chocolate Shamrock optimized for printing with a Cocoa Press Chocolate printer using a 0.8mm nozzle. Happy St. Patrick’s Day!

See here for video: https://youtu.be/U2hhQF4Yszo 

To print, set your bottom layers to “2” and turn on spiralized mode. The first two layers will print as a solid foundation, the rest of the leaveswill print in spiralized mode. Specialized printing is a great way to get smooth and consistent layers with your chocolate printer.

These files can also be printed with standard FDM filament printers, just don’t eat them!


Chocolate Shamrock

Chocolate Shamrock.stl

Get ready for St. Patrick's Day with these shamrock designs! Great for fridge magnets and other accessories!

Like these? Check out [my other March Magnets models!](https://thangs.com/search/%22march%20magnets%22%20creator%3A%22karenchaudesigns%22?scope=thangs&view=compact-grid)

---

Add magnets to your 3D prints!

**Shop supplies on Amazon:**
- [Magnets with adhesive](https://amzn.to/49TaubS)
- [Magnets](https://amzn.to/3Pw5kLD) & [Glue](https://amzn.to/3KezErc)

As an Amazon Associate I earn from qualifying purchases at no additional cost to you -- thanks for your support!

---

Likes appreciated :)

Enjoy!
💖Karen

Connect with me!
Twitter
Instagram
Threads
YouTube
TikTok


March Magnets - Day 2 #marchmagnets | Lucky Shamrock / Clover Magnets

March Magnets_Day 2a_Karen Chau Designs.stl

March Magnets_Day 2b_Karen Chau Designs.3mf

**Wicked - Complete Character Collection
**16 print-ready STL files from the hit Broadway musical
What's Included:

Witches: Elphaba, Glinda, Madame Morrible
Shiz University: Fiyero, Boq, Nessarose, Pfannee, Shenshen
Oz: Wizard of Oz, Dr. Dillamond
Flying Monkeys: Chistery, Nikko
Classic Characters: Scarecrow, Tin Man, Cowardly Lion, Dorothy

Specs:

10cm chibi style figurines
Pre-tested STL files
Resin & FDM compatible
One-piece prints
Layer height: 0.1-0.2mm

**Perfect for Wicked fans, Broadway collectors, and 3D printing enthusiasts!**

Wicked STL Files - Elphaba Glinda Fiyero - Musical Characters 3D Print Models

Character_4_Nessarose.stl

Power Ranger Turbo - Turbo R.A.M (Robotic Arsenal Mobilizer) is the five Turbo Weapons put together into a race car mounted  

This is a complete collection of my 3D-printable Turbo Ranger weapons, designed to let you build and combine the full Turbo Ram configuration — just like in the show!

Build Video:https://youtu.be/cNooqyEVG0k

Includes Files for :
Turbo Lightning Sword 
Turbo Hand Blasters
Turbo Thunder Cannon
Turbo Wind Fire 
Turbo Star Chargers
Connector parts

Whether you're printing for cosplay, display, or just for fun, each part is crafted for detail and modular connection. When combined, the weapons transform into the Turbo Ram — the iconic team cannon from Power Rangers Turbo!

Designed to be fun to build and even more fun to show off!

Power Ranger Turbo - Turbo R.A.M (Robotic Arsenal Mobilizer)

All Parts Green Ranger Turbo Thunder Cannon (Engine Cannon).stl

Unleash the power of the Green Turbo Ranger with my Green Ranger Turbo Thunder Cannon (Engine Cannon) This life-sized replica is a meticulously crafted homage to the iconic weapon wielded by , the Turbo Green Ranger.

The five Turbo Weapons put together into The Turbo R.A.M (Robotic Arsenal Mobilizer)

Build Video:https://youtu.be/tlZUzmmWrWo

Scale: 1:1 (Life-sized replica)
Height including handle: 31.2 cm
Height without handle: 20.6 cm
Length : 72.4cm
Width : 15cm

If file comes out small please scale to 1000%
Layer height: 0.16 - 0.2mm
Walls: 2 - 3
Supports: Yes
Infill: 10% - 15%
Brim: (optional)

Follow me on social media:
https://www.instagram.com/mrcampbellprints
https://www.tiktok.com/@mrcampbellprints
https://youtube.com/@MrCampbellPrints

Upgrade your Green Turbo Ranger cosplay or Power Rangers collection with this precision-made Power Item. Go, go, Power Rangers!

Green Ranger Turbo Thunder Cannon (Engine Cannon)

Embark on a morphinominal journey with my 3D printed Zeo IV Green Ranger Power Hatchet! This life-sized 1:1 scale replica pays homage to the impressive weapon wielded by Adam, the Zeo Ranger IV Green.

Build Video:https://youtu.be/5cJtmEawni0

Scale: 1:1 (Life-sized replica)
Height(thick):5cm
Length:28cm
Width:15.5cm

This Power Hatchet replica is a must-have for Power Rangers enthusiasts, cosplayers, or collectors seeking to add a touch of authenticity to their collection.

Zeo IV Green Ranger Power Hatchet

All Parts Zeo IV Power Hatchet.stl

Unleash the power of the Incredible Hulk with this striking 3D printable lightbox featuring the Marvel superhero. Choose to print just the Hulk or the base, which includes a customizable name option in Fusion 360 (free for personal use). Simply open the .f3d file and follow the step-by-step instructions provided in the accompanying YouTube video. Bring the strength and fury of the Hulk into your space with this impressive lightbox.

How to change Name:
https://www.youtube.com/watch?v=MC7ybI3dqj4

If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign!

WARNING!

- remove purge line at the beginning of the print, it may interfere, specially with bigger prints!






Materials and tools:
- glue gun
- aluminum tape
- led strip (here is the one I use): simple 1m white led USB

- soldering iron (optional)



RECOMMENDATIONS

- use a textured PEI sheet
- remove purge line at the beginning of the print!
- use the print profile, it has quite a few setting changes that help achieve the best results
- make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer

- use the aluminum tape on the inside of the backplate to help with light diffusion
- glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible

Bambu Studio Settings:
I always recommend using the print profile I provided since it has settings with which I've been able to get the best results.
If you choose not to here are the main slicer settings I recommend:
- preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 to 1.08
- Quality → Wall generator → Arachne
- Quality → Wall transitioning threshold angle → 30º to 50º
- Strength → Advanced → Infill/wall overlap → 20% to 25%
- Increasing retraction / reducing temperature can help reducing wisps
- Order color printing from lightest to darkest color


How to make a hole in Bambu Studio:
https://www.youtube.com/watch?v=OsA23WCxRtg&t=14s&ab_channel=braga3dprint




Assembly video:
https://www.youtube.com/watch?v=QNsShLmXYh0&t=8s&ab_channel=braga3dprint




How to print without AMS:
https://www.youtube.com/watch?v=RUSTGxOOS_U&t=4s&ab_channel=braga3dprint


The Hulk Customizable Name Lightbox LED Lamp

LED_hulk_customizable_ams_ready_private.3mf

NO AMS, NO SUPPORTS ✅

Share photos of your prints 🥒 

©Personal use only 💀
👉 Check My  [Patreon](https://patreon.com/bigovereasy)  and  [Boosty](https://boosty.to/bigovereasy) 👈
Join my [Telegram!](https://t.me/best_layer) ⭐💬

Flexible Pickle keychain

pickle7(Faceless)wm.stl

NO AMS, NO SUPPORTS ✅
There are two versions here, one is assembled with [glue](https://media.printables.com/media/prints/1632157/rich_content/8a84197a-5f75-4fae-a2cd-91c74f0a3b6b/vid_20260306_170104.gif), the second is based on the [snap-fit principle](https://media.printables.com/media/prints/1632157/rich_content/3b726729-9223-47b2-b238-85b823a87001/vid_20260306_170104_3.gif)

[A hole in the top](https://media.printables.com/media/prints/1632157/rich_content/a577b8aa-f217-438d-a58c-7a7345dd07e0/vid_20260228_225013_1_3.gif) part for use as a pendant or keychain 🔑

Share photos of your prints 🥦

©Personal use only 💀
👉 Check My  [Patreon](https://patreon.com/bigovereasy)  and  [Boosty](https://boosty.to/bigovereasy) 👈
Join my [Telegram!](https://t.me/best_layer) ⭐💬

Flexible Broccoli keychain

Cap_(for_ultra_flexi).stl

# 🇲🇽 Mexico Eagle LED Light Box – Tricolor Wall Art

Honor your roots with this layered LED light box featuring the iconic Mexican eagle devouring the serpent — styled in bold red, white, and green. Designed for easy printing and clean wiring, this wall lamp brings a modern glow to traditional pride.

🪶 *Includes snap-in USB-C port, LED slot routing, and wall-mount keyholes.*

Perfect for your office, workshop, or as a meaningful gift for family and friends!

---

## 🖨️ Print Settings

- **Front Panel**: 0.20 mm layers (First layer 0.16 mm)
- **Back Panel**: 0.24 mm layers
- **Scale**: 92% for Bambu X1C / Neptune 3/4 / P1P-S

| Setting    | Value                  |
|------------|------------------------|
| Walls      | 2 × 0.4 mm (0.8 mm)    |
| Infill     | 10% Grid               |
| Supports   | None                   |
| Seam       | Rear (Aligned)         |
| Adhesion   | Skirt or None          |

⚠️ *Calibrate flow for each filament — especially white! The first layer is the face.*

---

## 🛠️ Assembly Guide

1. **Print both parts** – the faceplate and the back panel.
2. **Install USB-C port** – snap-fit the USB-C female connector into the built-in orifice (14.6 mm x 5.4 mm).
3. **Solder wiring** – connect the USB-C to the 5V COB LED strip using the soldering kit.
4. **Secure connections** – protect solder joints with heat-shrink sleeves.
5. **Mount LEDs** – use foam tape to line the strip along the inner walls of the faceplate.
6. **Snap it shut** – press the back plate into place and hang using the rear keyholes.

---

## 🧰 Recommended Tools & Materials  
*These are affiliate links. If you purchase through them, I may earn a small commission at no extra cost to you. Thank you for your support!*

- 🔋 [5V COB LED Strip, Narrow 5mm](https://amzn.to/4kO7nqz)  
- 🔌 [USB-C Female Chassis Connector (Waterproof)](https://amzn.to/4kS8jdI)  
- 🔧 [Soldering Kit](https://amzn.to/411xkvQ)  
- 🛠️ [Helping Hand Soldering Vise](https://amzn.to/4lP1Dyn)
- 🔥 [Heat Shrink Sleeves – Assorted Sizes](https://amzn.to/3IEAEXy)  
- 🧻 [3M Double-Sided Foam Tape](https://amzn.to/3IWbJPa)  
- 🦾 [Super Glue – Clear & Strong](https://amzn.to/416hi3R)

### 🎨 Filaments I Use
- [Polymaker PLA PRO](https://amzn.to/3TV6DVP)  
- [Elegoo PLA](https://amzn.to/4lGFemL)  
- [ANYCUBIC PLA Plus](https://amzn.to/3IHtCkY)

## 🛠️ Level Up Your 3D Printing Setup  
Looking for more? Here's my personal list of tools, filaments, and must-haves:

👉 [**MS 3DPrints Essentials – Amazon Buying List**](#)  
*(Affiliate link – helps support my work at no extra cost to you)*

---

💬 Feedback, remixes, and makes are always welcome — let’s build smarter, together!  
☕ [**Buy Me a Coffee**](#) – Any support is truly appreciated!

Mexico Eagle LED Light Box – Tricolor Wall Art 

Mexico Eagle_1.3mf

This adjustable 3D-printed plant stand is designed to fit pots of various sizes, giving your plants the perfect lift. Easy to print and customize for your plant collection!


For more details, commercial licenses and exclusive models check out my Patreon :)
[Patreon](https://www.patreon.com/themakerslayer)


Needed Hardware:
Instant glue 

Assembly:
1. Print all pieces
2. Fix pieces together using instant glue
3. Leave to dry 


Printer info:
-Printed on bambu ps1, 0.4 nozzle, textured plate
-PLA from Bambu
-Support: yes, default, threshold angle: 30, on build plate only
-Brim: yes, 5 mm
-Infill: 15%


*Note:
- In the video and images, you'll see version 1, which didn’t have a support in the middle. The current updated version now includes a middle support to handle the weight of larger plant pots.
- A special 3-legged, no-wobble version is available exclusively for my patrons, and also for one-time purchase.


[Tap this link to visit my Patreon, but fair warning—you might experience an unexpected and uncontrollable desire to subscribe!](https://www.patreon.com/themakerslayer)

Flexi-Plant Stand 4 legs.3mf

Description:
A modern square plant pot with a cool twist—4 hidden coasters tucked underneath for easy use! Printable without AMS and without support!

For more details, commercial licenses and exclusive models check out my Patreon :)
[Patreon](https://www.patreon.com/themakerslayer)

Needed Hardware:
Instant glue (optional but adviced)

Assembly:
1. Slide the plant pot into the outer square holder. 
2. Optionally, add glue for extra support to hold the plant's weight.  
3. Lift the pot and place the coasters underneath.

Printer info:
Printed on bambu ps1, 0.4 nozzle, textured plate
PLA from Bambu + PLA / wood
Support: no
Brim: no
Infill: 15%


Note:
A 6-coaster version is also available for download on my Patreon!

[Tap this link to visit my Patreon, but fair warning—you might experience an unexpected and uncontrollable desire to subscribe!](https://www.patreon.com/themakerslayer)



Coasted plants series - #1 (no-ams)

Coasted plants series -1.3mf

**_FREE for a LIMITED time!_**

The Moss Planter is an organic and multi-textured item that will make a great home for your favorite houseplant. This unique and satisfying style is accomplished by combining standard and 'Fuzzy Skin' printing. Follow the printing guidelines below for a successful result! Download includes versions with and without holes (Planter vs Container), as well as a lid, and a drip tray (other drip trays shown in the photos may not be included).

This version of the planter is 80mm in diameter and 60mm tall. 

---

_**Printing Guidelines**_

- 3MF files for Bambu Studio and Prusa Slicer are included with the multi-texture settings already applied, but I still suggest you review the settings and slicer preview to make sure everything looks right for your setup

- Combine 'Main' and 'Fuzzy' parts to print together. 'Main' prints with standard settings (0.16mm layer height, 2-3 perimeters, 5 top layers, 0.4mm outer wall width). For the 'Fuzzy' part, set perimeters to 1, infill to 0%, and enable Fuzzy Skin on 'All walls' with point distance of '0.5mm' and thickness of '1mm'. 

- You can save some time and material by reducing the default value for 'Minimum sparse infill threshold' to 5mm².

_Importing STLs as multipart models_

- For Bambu Studio/Orca Slicer, drag both files into the slicer together and select 'Yes' to the prompt 'Load these files as a single object with multiple parts?' Now you can individually modify parameters under the 'Objects' setting tab.

- For Prusa Slicer, ensure that you are in 'Expert Mode'. First, import the 'Main' body, then right click on the name in the lefthand parts list, and click 'Add Part>Load' to add the 'Fuzzy' body. Now you can right click that part in the same list and go to 'Add Settings' to add 'Layers and Perimeters > Perimeters' + 'Infill > Fill density' + 'Fuzzy Skin > Fuzzy Skin + Fuzzy skin point distance + Fuzzy skin thickness'. That will add the ability to adjust those settings individually.

[I also made a video about the process](https://youtu.be/zmZCA9jqGiI?si=Nhn8_Sy2W9VxjTF9)


---

Photographed model was printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using colorFabb STONEFILL Moss Green ([Amazon](https://amzn.to/42q0beQ))([3DJake](https://tidd.ly/40tn7Hx))(Quite abbrasive and more prone to clogging but so beautiful!).*

*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_*. 




GREEN

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Chocolate Shamrock

March Magnets - Day 2 #marchmagnets | Lucky Shamrock / Clover Magnets

Wicked STL Files - Elphaba Glinda Fiyero - Musical Characters 3D Print Models

Power Ranger Turbo - Turbo R.A.M (Robotic Arsenal Mobilizer)

Green Ranger Turbo Thunder Cannon (Engine Cannon)

Zeo IV Green Ranger Power Hatchet

The Hulk Customizable Name Lightbox LED Lamp