Putting Game

housing (large).stl

Wild Holes Maze - Amateur

This is a maze, which requires calmness and dexterity. The goal of it is to put the ball in one corner and translocate it to the other. You solve it by tilting the maze, so that the ball moves along the paths. You have to avoid all the holes in your way. It can be played from both sides.

This is the easiest version with 12 holes. Check also versions with 24 holes and 48 holes!

Its width is 90 mm and the holes are 5 mm in diameter. It was designed for balls with a diameter of 4.4 mm (.177″). If needed, scale it according to these proportions.

---

**Recommended print settings**

- layer height: 0.2 mm
- infill: 10% grid
- perimeters: 2
- solid layers: 5
- ironing: yes

Turning on Ironing is recommended for the smoothest possible surface finish.

Wild Holes Maze - Standard

This is a maze, which requires calmness and dexterity. The goal of it is to put the ball in one corner and translocate it to the other. You solve it by tilting the maze, so that the ball moves along the paths. You have to avoid all the holes in your way. It can be played from both sides.

This is the easiest version with 24 holes. Check also versions with 12 holes and 48 holes!

Its width is 90 mm and the holes are 5 mm in diameter. It was designed for balls with a diameter of 4.4 mm (.177″). If needed, scale it according to these proportions.

---

**Recommended print settings**

- layer height: 0.2 mm
- infill: 10% grid
- perimeters: 2
- solid layers: 5
- ironing: yes

Turning on Ironing is recommended for the smoothest possible surface finish.

Wild Holes Maze - Nightmare

This is a maze, which requires calmness and dexterity. The goal of it is to put the ball in one corner and translocate it to the other. You solve it by tilting the maze, so that the ball moves along the paths. You have to avoid all the holes in your way. It can be played from both sides.

This is the hardest version with 48 holes. Check also versions with 12 holes and 24 holes!

Its width is 90 mm and the holes are 5 mm in diameter. It was designed for balls with a diameter of 4.4 mm (.177″). If needed, scale it according to these proportions.

---

**Recommended print settings**

- layer height: 0.2 mm
- infill: 10% grid
- perimeters: 2
- solid layers: 5
- ironing: yes

Turning on Ironing is recommended for the smoothest possible surface finish.

Pokemon Beast ball

Pokemon Beast Ball. 
many more of these to follow in the coming weeks

Peg Solitaire -Basic Triangle_ Bambu Lab MMU 3MF

**Objective:**
The objective of Peg Solitaire is to remove as many pegs as possible, ideally leaving just one peg remaining on the board.

**Gameplay:**
Start with the board set up with pegs in all holes, except for one predetermined hole (often the center hole) left empty.
- Pegs can only move horizontally or vertically, not diagonally.
- A peg can jump over an adjacent peg (either horizontally or vertically) to an empty hole on the other side, similar to how pieces move in checkers when capturing.
- The peg that was jumped over is removed from the board and considered "captured."
The game continues by making subsequent jumps, capturing pegs until no more legal moves can be made.
The goal is to make as many jumps as possible, ideally leaving just one peg on the board. If you succeed in leaving only one peg, you've won the game.

**Rules and Restrictions:**
You can only jump over a single peg at a time.
You can't jump over an empty hole.
The peg that is jumping must land in an empty hole after the jump.
The peg being jumped over must be adjacent to the peg making the jump, either horizontally or vertically.

**Winning:**
The game is considered a success if you end up with only one peg left on the board. If you achieve this, you have won the game. If you leave more than one peg on the board, or if no legal moves are possible, you lose the game.

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.
***
***Sculpt by @ChelsC423***

Peg Solitare -Basic Triangle_ Bambu Lab MMU 3MF

Peg Solitaire- Basic Triangle

PegSolitare_Board-Plain.stl

Thors chair Stargate SG1

the infamous chair of Thor from Stargate SG1
hope you love printing it as i did modelling it.

Xbox Series X Tentacle Dock - Print-in-Place

Tentacles_Xbox_X-Tentacle_Right_Holoprops.stl

Bell Pepper Springo (2 sizes)

bellpepper-full-singlepart.stl

Zelda Game and Watch Case

A case for carrying your Zelda Game and Watch on the go.

Depending on your printer's tolerances, the sliding door may be a little loose.

Printed at 0.2 mm layer height
Printed with Prusament Lime Green PLA, Prusament Pineapple Yellow PLA, and Amolen Bamboo Wood PLA.

I printed the lid and box separately, and swapped filament partway through to make the Triforce yellow and sword brown

HOMER SIMPSON - LAMP

HOMER_LAMP_CONTOUR.stl

POKEMON - LAMP

LAMP CONTORN.stl

BART SIMPSON - DECOR

BART_DECOR_BACK.stl

BART SIMPSON - LAMP

BART_LAMP_CONTOUR.stl

Zygarde Complete Form Pokemon Figure in the Style of Bandai Finger Puppets

A Pokemon figure of Zygarde Complete form in the style of Bandai finger puppets.

This figure was designed for a commission. If you would like to commission me to design 3d printable miniatures you can do so at my Etsy store. MechatronicGames:
https://mechatronicgames.etsy.com

Find all of my designs at cults3d here:
https://cults3d.com/en/users/Mechatronist


GAME

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Putting Game

Wild Holes Maze - Amateur

Wild Holes Maze - Standard

Wild Holes Maze - Nightmare

Pokemon Beast ball

Peg Solitaire -Basic Triangle_ Bambu Lab MMU 3MF

Peg Solitaire- Basic Triangle

Thors chair Stargate SG1

View 46 new models

View 20 new models

Zelda Game and Watch Case

HOMER SIMPSON - LAMP

POKEMON - LAMP

BART SIMPSON - DECOR

BART SIMPSON - LAMP

Zygarde Complete Form Pokemon Figure in the Style of Bandai Finger Puppets

Alphabet Board Game - BackToSchool

PASS_FAIL_1or20

View 66 new models

Murder in the Dark Game Necklace Tokens