Hex Bin Gridfinity 2x3

Hex Tray Gridfinity 2x3

This Hex Tray offers thicker walls for a more rigged tray. 2x2 Gridfinity base plate.  

Hex Tray Gridfinity 2x3

Steampunk Spider

josh-steampunkspider-cinderwing3d.stl

Rey's Collapsing Lightsaber

**Ray’s Print-in-place Collapsing Lightsaber**
_Print-in-Place Version_

This Lightsaber is designed to be printed all as one part as a single print-in-place assembly containing both the saber and the blade. It prints 231mm tall but extends to over 1000mm long. 

The [Removable Blade Version]( https://www.patreon.com/3dprintingworld) is available to my Patrons.

**Printing**
Supports are not required, there is a built in support for the on/off switch. When printing use a .4mm nozzle and set the line width to .43 so the blades are two shell thick. This print is sensitive to first layer height, the  layer seam and extruder calibration.  If this is your first time printing, I would suggest you try the [test print]( https://social.thangs.com/m/23601) first. Make sure the segments are totally free before continuing.  it’s a good idea to make sure your setting are tuned so the blades don’t fuse. The test print is a total of 24mm high so I change; retraction, cost, wipe, extra restart, z-hop, ext.. settings every 8mm.  Then I compare the changes until I achieve the best result.  The removable blade version is a much easier print because you can print the blades separately in vase mode. 

Printed on the [Muldex]( https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer with [Polymaker Silk Silver PLA](https://amzn.to/3zMj2Ca)(aff.)

**Other Collapsing Lightsabers**
[ROTJ Dual Extrusion]( https://thangs.com/3dprintingworld/Collapsing-Lightsaber-Dual-Extrusion--34803)
[Vader’s Single Extrusion]( https://thangs.com/3dprintingworld/Collapsing-Sith-Lightsaber-23598)
[Vader’s Dual Extrusion]( https://thangs.com/3dprintingworld/Collapsing-Sith-Lightsaber-dual-extrusion-28319)
[Leia’s Dual and Single](https://thangs.com/3dprintingworld/Leias-Dual-Extrusion-Collapsing-Lightsaber--25509)


Cinnaswirl Turtle

Cinderwing3D Cinnaswirl Turtle.stl

Flexi Flounder - Little Mermaid Articulated Toy

Flounder2.3mf

Gridfinity Flip-Top Container

FlipUp_Container_Bottom.stl

Winter Tadling

winter-tadling-with-wings-keyring.stl

Garden Stakes - English, French, and German - new added

Garden Stakes - Cilantro.stl

Master Chunk - Halo Master Chief Kit | No Supports, No AMS, No Glue

Ash Grey.stl

Orchid Tadling

floral-tadling-set-orchid-tadling.stl

Flexi Dragon

New Flexible Dragon
Easy to Print & No support required 

3D Print Flexible Dragon

Desk Bin - Medium garbage bin - Trash

Tub (in one piece).stl

haunter 

I'm thrilled to unveil my latest creation! a meticulously designed and incredibly fun 3D printable model of the mischievous Ghost/Poison Pokémon, Haunter!
I've aimed to capture the essence of this iconic Pokémon while also adding a unique twist that will surely make it stand out in any collection. Unlike traditional models, this one has a special feature that allows Haunter to stand on its very own tongue! It's an eye-catching pose that brings an extra dose of personality to this spectral Pokémon.

**this model can only be printed in a single color, for those who prefer multicolor printing, there's a multipart version available on my Patreon page at:  https://www.patreon.com/pressprint
meaning that you can print in multicolor using your ender 3.**


•min scale should be 100%
• use supports for the main body
• use a raft for the main body


happy printing.

Box Builders - Shelf/Storage/Box/Whatever Building Connectors

Shelf X Bracket.stl

Straight Weave Planter

Straight Weave Wall Pot 4.5.stl

Iron-Chunk - Iron-Man Marvel Kit | No Supports, No AMS, No Glue

Plate 1 - Army Red.stl

Gridfinity 16pcs ¼in Screwdriver Bit Holder 1x1x3.stl

A somewhat simple compartment to organize your quarter inch screwdriver bits. Fits up to 16, but I recommend storing 8 at most for quick access, or you'll end up fat fingering super hard when trying to reach the one you want

Crochet Penguin 3

Crochet Penguin 3.stl

Jigglypuff -Jason

JigglyPuff-Jason.stl

Lechonk - Pokemon - Fan Art

Lechonk - Pokemon - Fan Art
If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

G

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Hex Bin Gridfinity 2x3

Steampunk Spider

Rey's Collapsing Lightsaber

Cinnaswirl Turtle

Flexi Flounder - Little Mermaid Articulated Toy

Gridfinity Flip-Top Container

Winter Tadling

Garden Stakes - English, French, and German - new added

Master Chunk - Halo Master Chief Kit | No Supports, No AMS, No Glue

Orchid Tadling

Flexi Dragon

Desk Bin - Medium garbage bin - Trash

haunter

Box Builders - Shelf/Storage/Box/Whatever Building Connectors

Straight Weave Planter

Iron-Chunk - Iron-Man Marvel Kit | No Supports, No AMS, No Glue

Gridfinity 16pcs ¼in Screwdriver Bit Holder 1x1x3.stl

Crochet Penguin 3

Jigglypuff -Jason

Lechonk - Pokemon - Fan Art