Tree of Life Napkin Holder

Tree of Life Napkin Holder for your table settings...

No Supports


BrachioNuggus

In addition to my previous Chicken Nugget models, I have created the 3D-Printable Brachio-Nuggus, the most longest of the Dino Nuggie family.

-If you want access to my entire library of designs for less than the cost of 2 or 3 downloads here on Cults, you can check out my Thangs Memberships (Thangs also has more of our models for free): https://thangs.com/designer/RWB%20Designs

Print Settings:
Enable Fuzzy Skin (I used default bambu slicer settings for this)
.1 - .2 mm layer height
no supports
15% - 25% infill
Print with flat side on bed
Brim recommended

Large Pasta Bowl Container - Spaghetti Monster!

4 Taco Remix of Taco Cat taco holder with handle

TacoCat_2.stl

Digestive Biscuit

Plain Digestive (McVities).stl

Taco Cat taco holder with handle

Pumpkin with vine | Fall / Autumn seasonal decor | Halloween / Thanksgiving magnet

Add any size magnet you want to the back and stick it everywhere!

[Magnets](https://amzn.to/3Pw5kLD)
[Glue](https://amzn.to/3KezErc)
[Magnets with adhesive](https://amzn.to/3LigqRP)

---

_As an Amazon Associate I earn from qualifying purchases.
Shopping through my links does NOT cost extra to you, but I may earn commission which helps support my design process so I can continue providing free 3D models to the community. Thanks for your support!_

Blessed Cookie Stamp

This model is a blessed cookie / fondant stamp!

The model is 80mm round, however you can scale it to whatever size you need!

Pumpkin Vampire Soda Can (remix of the Blank Can Cup RETURNS! made by MandicReally)

Pumpkin Vampire Soda Can is here. This is a remix of the Blank Can Cup RETURNS! made by MandicReally. To print it out and fit a 12oz can of soda, use these measurements in CURA. 

X:130.9177
Y:100.0732
Z:113.5002
Layer Heigh: 0.28mm (Optional)
Infill: 5% (Optional)

I recommend if you want to do a preliminary test only by printing the upper part of the model in its first layers and do a test to test the resistance when you put the can in (as seen in the photos).

Happy Halloween Printing

You can also follow me on:

https://www.instagram.com/gioteya_designs/
https://twitter.com/Gioteya72
https://www.facebook.com/gioteyadesigns

Thanks for watching.



shkoop // measuring scoop 1/3 cup and 1/4 cup

This measuring SHKOOP has an inner and outer marking at 1/4 cup, and is 1/3 cup at the brim. I figure it can be helpful for dry goods around the kitchen and other powders around the house.

---


Unless you're trying to make this watertight, you should be fine using 4-5 shells, 30% infill. I used PETG.

Tea Bag String Clip

I got tired of the paper on the end of my tea bags not having enough heft to keep themselves out of my tea, so I made these.  

They print in place with a live hinge and clip very nicely around the string.  

They also say tea time which is helpful in remembering that it is in fact tea time while you are drinking tea.

You're a Cunt cookie cutter

Got that friend who you think is a bit of a Cunt but cant say it to there faces? Well do I have the product for you!

Simply print one of these bad boys, make a simple sugar cookie or shortbread recipe (make sure the recipe has no baking soda or powder) then bake in an oven and voila!

Now you can give your friend a delicious treat saying how you really feel! This cutter can also be used for fondant or clay crafts.

You may have to increase the size of the cutter for better results. This is my first design so sorry if its janky.

Cheesy Box - No Holes

no_holes_FOR_DISPLAY.stl

Cheesy Box - Holes in lid

assembled_FOR_DISPLAY.stl

Mario mushroom pumpkin stash container

pumpkin no stem.stl

Delivery Car Accessory

Great for groceries and food deliveries! If you're worried about your cake or pizza sliding and tumbling around in your car trunk, set some boundaries for it with these corner pieces. 

Use 2 corner pieces for smaller items and 4 for larger items.

Simply add pieces of hard Velcro to the bottoms and stick them to the fuzzy carpet in your trunk or car floor.

This is what I used: https://amzn.to/3YvkR0R 

_As an Amazon Associate I earn from qualifying purchases. 
Shopping through my link does NOT cost extra to you, but I may earn commission which helps support my design process so I can continue providing free 3D models to the community. Thanks for your support!_

**Like & follow for more free 3D models!**

---

**Interested in selling physical prints?**
[Become a member for a commercial use license](https://thangs.com/designer/karenchaudesigns?plans=true)

Food Delivery Car Accessory

Tangle Trays (Large)

Tangle Tray Large 1.stl

Transforming Chopsticks

This is a fun little experiment relating to compliant mechanisms (though this one does rely on one moving part: the marble).

If you've seen my [Cool Prints video](https://youtu.be/PgDJlLqeTdo) about it, you know this doesn't function 100% as intended, but it's still pretty cool!

Print at about 4 shells, 35% infill. I used PLA, though other filaments may have better results.

Add one standard 9/16" (14mm) marble as the pivot point.

Food

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Tree of Life Napkin Holder

View 16 new models

Large Pasta Bowl Container - Spaghetti Monster!

4 Taco Remix of Taco Cat taco holder with handle

Digestive Biscuit

View 13 new models

Pumpkin with vine | Fall / Autumn seasonal decor | Halloween / Thanksgiving magnet

View 53 new models

Pumpkin Vampire Soda Can (remix of the Blank Can Cup RETURNS! made by MandicReally)

View 21 new models

Tea Bag String Clip

You're a Cunt cookie cutter

Cheesy Box - No Holes

Cheesy Box - Holes in lid

Mario mushroom pumpkin stash container

Delivery Car Accessory

Tangle Trays (Large)

View 111 new models

Ladu glass jar

BELL SIPHON FOR FLOOD AND DRAIN - 2 SIZES