Round Self Watering Design Planter "Dropster"

SW007.stl

PRICKLY PEAR KEYCHAIN 002 - Cactus 

01.  PRICKLY PEAR KEYCHAIN 002 - WITH RING.stl

Designer Mid-Century Plant Pot with Feet

RP016.stl

Design Plant Pot "Thousand squares"

RP019.stl

Baby Groot Flowerpot

TriDimen Studio _ Groot Planter.stl

Moss Planter 70x120mm

MossPlanter70x200_Planter_Cura.3mf

Breeze Weave Planter

Breeze Weave Planter.stl

Design Octagonal Succulents Planter

OP004.stl

Modern Ribbed Designer Vase

RV030.stl

Modern design ribbed vase

RV036.stl

Curved Bonsai Pot with Drainage Hole

BP014.stl

Carrot Shaped Doggy Bag Holder

Carrot Doggy Bag Holder.STEP

Owl Vase Art Organizer

Untitled.stl

Honeycomb Planter

honeycomb-planter.stl

Onion Flowerpot

Thingamajig Ornament Suncatcher

*Not to be Sold*
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

*What is it?*
This is part of a series of designs that were originally intended as Christmas tree ornaments and I later found also made great suncatchers for any time of year (when printed with transparent filament/resin). This is the second in the series to be published.

Beyond that, what is it? Well, it's kind of a snowflake pattern (5 points instead of 6), kind of a star, kind of flowery, and bears a large resemblance to gothic architecture. Mostly, it's just a cool geometric design that I enjoy looking at.

*How to Hang it*
I've included two small, well hidden loops behind one of the arms so you can tie coat thread on them and hang it up. See the detail photo included above. They are really small and very well hidden.

*Print Time*
Depending on the wall thickness, these printed in 2-3 hours for me.

*Thickness*
If you want to use these as Christmas ornaments, I recommend trying to print this with 1 line (0.4mm) walls. As a suncatcher, it looks good with 1 or 2 line walls (I prefer 2). I needed to make the walls with 2 lines (0.8mm) to get a good print from the TTYT3D Silky Green. I set the top/bottom thickness to 0.3mm.

You probably have your printer set up to print 1.2mm walls and top/bottom thickness. Don't use those settings for this design unless you plan to use it as a paperweight. If you forget to change them, cancel the print and start over.

*Flow*
I increased the flow to 110% for the outer walls and 105% for the inner.

*Infill*
This doesn't need any infill. Seriously. Don't add it unless you want to use this as a paperweight. I tried adding infill. All it added was weight. The prints look exactly the same.

*Speed*
I print the first layer at 18mm/second. That makes sure that the complicated design gets good bed adhesion without a raft or brim. It also adds less time to the print and less clean-up than using a raft or a brim. If you have a cold bed, you might need the raft or brim anyway.

For all other layers, I use:
* 30mm/second outer wall speed
* 40mm/second inner wall speed
* 60mm/second overall speed

Flowerpot

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Round Self Watering Design Planter "Dropster"

PRICKLY PEAR KEYCHAIN 002 - Cactus

Designer Mid-Century Plant Pot with Feet

Design Plant Pot "Thousand squares"

Baby Groot Flowerpot

Moss Planter 70x120mm

Breeze Weave Planter

Design Octagonal Succulents Planter

Modern Ribbed Designer Vase

Modern design ribbed vase

Curved Bonsai Pot with Drainage Hole

Carrot Shaped Doggy Bag Holder

Owl Vase Art Organizer

Honeycomb Planter

Onion Flowerpot

Thingamajig Ornament Suncatcher

Heart Vase

Melted Woman Head- Support Free Planter/Jewelry Holder

Planter Rombus

PRICKLY PEAR KEYCHAIN 001 - Cactus - Floors