Cylindrical Celtic Knot Vase (Single Panel)

This stone-textured cylindrical vases feature bands of Celtic knot latticing. It is part of a series of three.

See here for video: https://youtu.be/vKYsNHof_KA 

See here for others in the series: 
Single Panel:
Double Panel:
Triple Panel:


Garter Knit Round Bowl (Vertical)

This bowl is part of a pair of knitted round bowls featuring a “garter knit” pattern. A garter knit is formed by alternating rows of regular and purl stitches.

In one bowl, the alternating rows are oriented vertically, in the other they are oriented circumferentially.

See here for video: https://youtu.be/y0uVxO7lLik 

See here for other Garter Knit Round Bowls:
Circumferential: https://social.thangs.com/m/507033 
Vertical:


Use supports for the outside bottom of the bowl. The top inside of the bowl has bridges and overhangs that cannot be supported. The print fails will be small and mostly hidden, and you can clean up any visible flaws with a file.


Garter Knit Round Bowl (Circumferential)

This bowl is part of a pair of knitted round bowls featuring a “garter knit” pattern. A garter knit is formed by alternating rows of regular and purl stitches.

In one bowl, the alternating rows are oriented vertically, in the other they are oriented circumferentially.

See here for video: https://youtu.be/y0uVxO7lLik 

See here for other Garter Knit Round Bowls:
Circumferential:
Vertical:


Use supports for the outside bottom of the bowl. The top inside of the bowl has bridges and overhangs that cannot be supported. The print fails will be small and mostly hidden, and you can clean up any visible flaws with a file.


Serac Vase 140mm

This piece is part of a set of four abstract vases inspired by glacial seracs. A serac is a block or column of glacial ice, often formed by intersecting crevasses on a glacier. They are dangerous to mountaineers since they may topple with little warning, so be sure to put them on a sturdy surface.

See here for video: https://youtu.be/BL3vv8oyQlk 

The center hole is approximately 40mm in diameter, large enough to hold an electric tealight or suitably sized glass container. Approximate heights are indicated below and in the file name.

See here for others in the set:

Serac Vase 80mm: https://social.thangs.com/m/491853 
Serac Vase 100mm: https://social.thangs.com/m/491867 
Serac Vase 120mm: https://social.thangs.com/m/491883 
Serac Vase 140mm:

The models shown are printed with the following types of tricolour silk filament by Eryone:

Serac Vase 80mm: “Red & Yellow & Blue”
Serac Vase 100mm: “Red & Blue & Green”
Serac Vase 120mm: “Red & Gold & Purple”
Serac Vase 140mm: “Gold & Silver & Copper”


Serac Vase 100mm

This piece is part of a set of four abstract vases inspired by glacial seracs. A serac is a block or column of glacial ice, often formed by intersecting crevasses on a glacier. They are dangerous to mountaineers since they may topple with little warning, so be sure to put them on a sturdy surface.

See here for video: https://youtu.be/BL3vv8oyQlk 

The center hole is approximately 40mm in diameter, large enough to hold an electric tealight or suitably sized glass container. Approximate heights are indicated below and in the file name.

See here for others in the set:

Serac Vase 80mm: https://social.thangs.com/m/491853 
Serac Vase 100mm: 
Serac Vase 120mm: 
Serac Vase 140mm:

The models shown are printed with the following types of tricolour silk filament by Eryone:

Serac Vase 80mm: “Red & Yellow & Blue”
Serac Vase 100mm: “Red & Blue & Green”
Serac Vase 120mm: “Red & Gold & Purple”
Serac Vase 140mm: “Gold & Silver & Copper”


Serac Vase 80mm

This piece is part of a set of four vases is inspired by glacial seracs. A serac is a block or column of glacial ice, often formed by intersecting crevasses on a glacier. They are dangerous to mountaineers since they may topple with little warning, so be sure to put them on a sturdy surface.

See here for video: https://youtu.be/BL3vv8oyQlk 

The center hole is approximately 40mm in diameter, large enough to hold an electric tealight or suitably sized glass container. Approximate heights are indicated below and in the file name.

See here for others in the set:

Serac Vase 80mm: 
Serac Vase 100mm: 
Serac Vase 120mm: 
Serac Vase 140mm:

The models shown are printed with the following types of tricolour silk filament by Eryone:

Serac Vase 80mm: “Red & Yellow & Blue”
Serac Vase 100mm: “Red & Blue & Green”
Serac Vase 120mm: “Red & Gold & Purple”
Serac Vase 140mm: “Gold & Silver & Copper”


Knitted Stocking Container.stl

Warm your winter supplies with this cozy Knitted Stocking container! 

See here for video: https://youtu.be/jKJB6-62kV4 

The toe, heel and body of the stocking use a regular knit geometry. The upper trim uses a rib knit geometry.

Print without supports. You will get some small areas of print fail on the inside and lower edges, but this will either not be visible or easy to clean up with a file if you choose.


Wicker Bowl (Vertical Stakes)

This model is part of a set of two styles of round wicker bowls. In wicker weaving, the “stakes” are the rigid structures around which thinner “strands” are woven. The files are named for the orientation of the stakes in the model.

See here for video: https://youtu.be/GwzDR4dE8Fw 

Others in the set:
Circumferential Stakes: https://social.thangs.com/m/475733 
Vertical Stakes: 

Wicker is a very challenging geometry for 3D printing because of the many bridges and overhangs. It is often difficult or impossible to set up supports for all overhangs. 
The models shown are printed without supports, and I invite you to try the same! You will get some areas of print fail that will add to the uniqueness of the print and can be cleanup up easily with a file if needed.


Wicker Bowl (Circumferential Stakes)

This model is part of a set of two styles of round wicker bowls. In wicker weaving, the “stakes” are the rigid structures around which thinner “strands” are woven. The files are named for the orientation of the stakes in the model.

See here for video: https://youtu.be/GwzDR4dE8Fw 

Others in the set:
Circumferential Stakes:
Vertical Stakes: 

Wicker is a very challenging geometry for 3D printing because of the many bridges and overhangs. It is often difficult or impossible to set up supports for all overhangs. 
The models shown are printed without supports, and I invite you to try the same! You will get some areas of print fail that will add to the uniqueness of the print and can be cleanup up easily with a file if needed.


Wacky Wicker Gerbera Bubble 2

This “Wacky Wicker Gerbera Bubble 2” is part of a playful kitchenware set featuring warped and asymmetrical wicker patterns.

See here for video: https://youtu.be/505m3MXVl1A 

Wicker is a very challenging geometry for 3D printing because of the many bridges and overhangs. This set is made even more challenging with the addition of extra angles and contours.

I made this set to test out my new Lulzbot TAZ Pro, and it did quite well! Use the designs as a “torture test” for your own 3D printer.


Wacky Wicker Gerbera Bubble 1

This “Wacky Wicker Gerbera Bubble 1” is part of a playful kitchenware set featuring warped and asymmetrical wicker patterns.

See here for video: https://youtu.be/505m3MXVl1A 

Wicker is a very challenging geometry for 3D printing because of the many bridges and overhangs. This set is made even more challenging with the addition of extra angles and contours.

I made this set to test out my new Lulzbot TAZ Pro, and it did quite well! Use the designs as a “torture test” for your own 3D printer.


Wacky Wicker Broccoli Basket

This “Wacky Wicker Broccoli Basket” is part of a playful kitchenware set featuring warped and asymmetrical wicker patterns.

See here for video: https://youtu.be/505m3MXVl1A 

Wicker is a very challenging geometry for 3D printing because of the many bridges and overhangs. This set is made even more challenging with the addition of extra angles and contours.

I made this set to test out my new Lulzbot TAZ Pro, and it did quite well! Use the designs as a “torture test” for your own 3D printer.


Rib Knit Round Bowl

This knitted round bowl features a “rib knit” pattern. A rib knit is formed by alternating regular and purl stitches.

See here for video: https://youtu.be/nda4gtQC9Ws 


voronoi pot.obj

no rounded edge on the throat. it looks better to me personally.
printed :
0.2 mm layer height
0.4 mm layer with
50mm/s

flower pot plate higher.obj

this plate its higher then first one . more practical.
printed :
0.2 mm layer height
0.4 mm layer with
50mm/s

Pasta Vase (Large)

This vase is part of a set of vases inspired by pasta. Each vase is made with twelve interwoven hollow tubes.

See here for video: https://youtu.be/dszT0SkozdU

See here for others in the set:
Small: https://social.thangs.com/m/408292 
Medium: https://social.thangs.com/m/408303 
Large: 


Pasta Vase (Medium)

This vase is part of a set of vases inspired by pasta. Each vase is made with twelve interwoven hollow tubes.

See here for video: https://youtu.be/dszT0SkozdU

See here for others in the set:
Small: https://social.thangs.com/m/408292 
Medium:
Large: 


Pasta Vase (Small)

This vase is part of a set of vases inspired by pasta. Each vase is made with twelve interwoven hollow tubes.

See here for video: https://youtu.be/dszT0SkozdU

See here for others in the set:
Small:
Medium:
Large: 


Stylish vase

A 3D printable vase for flowers and decoration.

Enjoy and have fun 3D printing!

Braided Grass Vase (Large)

This “Braided Grass Vase” is part of a series of three vases derived from a 24-strand regular weave with a float length of 2. 

Small: https://social.thangs.com/m/377788 
Medium: https://social.thangs.com/m/377789 
Large:

See here for video: https://youtu.be/kW1Rz8yfZ84 


Flower Vase

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Cylindrical Celtic Knot Vase (Single Panel)

Garter Knit Round Bowl (Vertical)

Garter Knit Round Bowl (Circumferential)

Serac Vase 140mm

Serac Vase 100mm

Serac Vase 80mm

Knitted Stocking Container.stl

Wicker Bowl (Vertical Stakes)

Wicker Bowl (Circumferential Stakes)

Wacky Wicker Gerbera Bubble 2

Wacky Wicker Gerbera Bubble 1

Wacky Wicker Broccoli Basket

Rib Knit Round Bowl

voronoi pot.obj

View 12 new models

Pasta Vase (Large)

Pasta Vase (Medium)

Pasta Vase (Small)

Stylish vase

Braided Grass Vase (Large)