**Introducing my Squirrel design!!** 

 A little something extra for the Holiday season, this design comes with an alternate head wearing a **Santa Hat!!**

I'm trying something a little different with this design, utilizing more of the Connector joints for added posing options.  As a result, this one has a bit more snap-fit assembly required when compared to my other designs, but I think it's worth it for the added benefits.  Additionally, I designed a simple tool I'm calling the "ConnectorHelper".  It can be used to add a bit more leverage and a larger pressing surface when inserting the Connector pins. Here's a [Demo Video](https://tinyurl.com/yh4naehe) that shows the assembly!

Multicolor 3MF included (Compatible with PrusaSlicer, Bambu Studio, Orca Slicer, etc.)!  

**PLEASE READ:**
All MatMire Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way, including altered or "remixed" versions. Prints of the design cannot be sold without authorization.

To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my [Patreon](https://tinyurl.com/5cm9wyrv) or [MMF Tribe](https://tinyurl.com/ye3tx7kb).  Membership also includes Exclusive Designs, Bonus Files, and Discounts on past files!

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!

Visit my [Amazon Storefront](https://www.amazon.com/shop/matmire_makes) for links to the Filaments & Equipment I used[.](https://youtube.com/shorts/C6Ny1xjLtiw)
.
.
**PRINTING DETAILS**
- **Body:** Print-in-place
- **Heads (Regular and Santa versions):** Snap-fit to Body using Connector Head. There is a small custom brim around the head to help with adhesion. Remove and discard it after printing
- **Tail:** Snap-fit to Body
- **Arms Lf & Rt:** Snap-fit to Body using Connector Legs
- **Hands Lf & Rt:** Snap-fit to Arms Lf & Rt
- **Legs Lf & Rt:** Snap-fit to Body using Connector Legs
- **Feet Lf & Rt:** Snap-fit to Legs Lf & Rt
- **Connector Head (x2):** Use to connect the heads to the body.
- **Connector Legs (x4):** Use to connect the Legs and Arms to the body.
- **“Squirrel_Full” STLs:** All parts pre-arranged in one file. File options with and without the Santa head.
- **Multicolor 3MFs:** (Compatible with PrusaSlicer, Bambu Studio, Orca based slicers) 
- -”5Color_BrownStyle” (5 colors, but deleting the Santa head reduces it to 4 colors)
- -”4Color_GrayStyle” (4 colors, but deleting the Santa head reduces it to 3 colors)
- -”SantaHeadOnly_4Color_BrownStyle” (To print Head separately in 4 Color/Brown Style)
- **Tool_ConnectorHelper:** Simple tool to aid in inserting connector pins (see video)
- **No supports**
- **10%-15% Infill** (I recommend Gyroid, Crosshatch or 3D Honeycomb)
- **3 Walls.** (Assuming 0.4mm nozzle. Adjust wall count to account for alternate nozzle sizes)
- This should generally scale down to about 65% with full articulation, on a well calibrated printer.  Your mileage may vary.

Check out this assembly [Demo Video !](https://www.youtube.com/watch?v=ZgPyVwSMCmI)

***This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.**

_**Attention:** Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3._

Squirrel, plus Santa Hat version - Articulated Figure

MMM_Squirrel__Full__v02.stl

MMM__Tool_ConnectorHelper_v01.stl

MMM_Squirrel__Full_noSanta_v02.stl

MMM_Squirrel_Arm_Lf_v02.stl

MMM_Squirrel_Arm_Rt_v02.stl

MMM_Squirrel_Body_v02.stl

MMM_Squirrel_Connector_Head_x2_v02.stl

MMM_Squirrel_Connector_Legs_x4_v02.stl

MMM_Squirrel_Foot_Lf_v02.stl

MMM_Squirrel_Foot_Rt_v02.stl

MMM_Squirrel_Hand_Lf_v02.stl

MMM_Squirrel_Hand_Rt_v02.stl

MMM_Squirrel_Head__v02.stl

MMM_Squirrel_Head_Santa_v02.stl

MMM_Squirrel_Leg_Lf_v02.stl

MMM_Squirrel_Leg_Rt_v02.stl

MMM_Squirrel_Tail_v02.stl

One more design for Thanksgiving Season, cute baby turkey hiding in a barrel. it have an ability to pose the eye and also multi purpose function as a keychain, toys, or as a coins container.

3D PRINTING SETTINGS:

0.4 Nozzle
0.16 layer height
5% gyroid sparse infill
PLA, PLA+ materials (I'm using Polyterra and SUNLU PLA+)
Bambu lab slicer
NO SUPPORT needed
Ready to print in multicolor AMS
Partial print in place
Snap in Assembly

Turkey in a Barrel

AllParts_AMS.3mf

AllParts_WithoutAMS.3mf

BarrelParts.stl

TurkeyParts.stl

**Introducing a spooky season favorite... the Tarantula!!** (...with apologies to anyone who's afraid of spiders)

The legs are super-posable using snap-fit assembly. The spinnerets on it's abdomen even form a loop you can use to hang it from some string. Great for a spooky decoration!

Please check out this video for a detailed breakdown of the assembly and features... [Demonstration Video\
](https://youtu.be/aZ6h31XeVPo)

With 3d printing tolerances being somewhat unpredictable, I added some methods to help fine-tune the leg joint tolerances if needed (either by clipping a specific spot on the model or using the joint test objects to dial-in the leg scale).  For help with that, **PLEASE READ THE INSTRUCTIONS GUIDE INCLUDED IN THE DOWNLOAD, or [watch This Video](https://youtu.be/-F45C86IXoo).**

ATTENTION:
All MatMire Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.

To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my [Patreon](https://www.patreon.com/matmire_makes) or [MMF Tribe](https://www.myminifactory.com/users/MatMireMakes?show=tribe#/).

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!

Please, share photos of your makes! I would love to see them!

Visit my [Amazon Storefront](https://www.amazon.com/shop/matmire_makes) for links to the Filaments & Equipment I used.

Attention:
Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.

Printing Details

-   **PLEASE READ THE INSTRUCTIONS GUIDE INCLUDED IN THE DOWNLOAD**
-   **Body**: No supports needed.
-   **Abdomen**: No supports needed, remove custom brim after printing and snap-fit to Body
-   **Legs**: all limbs in one stl for easy placement and scaling, snap-fit to Body, No supports needed.
-   **Legs (individual files)**: all limbs separated into individual STLs, in case you want to reprint specific ones, or arrange them differently on the print bed.
-   **Test Ball & Test Socket files**: If your print has too tight or too loose fitting legs, watch** [This Video](https://youtu.be/-F45C86IXoo) **to help dial in the joint tolerances.
-   **Multicolor 3MF**: (Compatible with PrusaSlicer and Bambu Studio)
-   **10%-15% Infill** (I recommend Gyroid, Crosshatch or 3D Honeycomb)
-   3 Walls.\
If you use brims to aid in bed adhesion, I recommend setting the brim gap to around 0.3-0.35mm. This will still help adhesion, yet will also make the brim much easier to remove. 

This should generally scale down to about 65% with full articulation, on a well calibrated printer.  Your mileage may vary.\
Please check out this video for a detailed breakdown of the assembly and features... [Demonstration Video\
](https://youtu.be/aZ6h31XeVPo)

**This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.*

Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.

Tarantula - Articulated Figure

MMM_Tarantula_Multicolor_v02_bambuEtc.3mf

MMM_Tarantula_Multicolor_v02_prusa.3mf

**Introducing my Quokka design!**  This adorable Australian marsupial has a reputation of being the happiest animal in the world.  It's hard to argue with that when you see their cute little smiles.  In honor of that, I am including two different head sculpts!  One with a closed mouth smile and one with an open mouth smile.

Check out a quick [Demo Video Here](https://youtu.be/CTClTSPxiHU)!

Multicolor 3mf included (works in PrusaSlicer and Bambu Studio)!!

Please, share photos of your makes! I would love to see them!


**PLEASE READ:**
All MatMire Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use.  You do NOT have permission to resell or redistribute those digital files in ANY way.  This includes altered or "remixed" versions of the designs.  Prints of the design cannot be sold without authorization.

To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my [Patreon](https://www.patreon.com/matmire_makes) or [MMF Tribe](https://tinyurl.com/ye3tx7kb).

If you like this design, please check out my Socials and give a follow. More designs are coming soon!

**This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.*

Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.

**Printing Details**
-   **Head (Open or Closed Mouth version!):** Snap-Fit to Body.  No additional support needed.
-   **Body:** Print-In-Place. No additional support needed.
-   **Tail:** Snap-Fit to Body. Print-In-Place. No additional support needed.
-   **Multicolor 3MF:** includes multicolor 3MF file that is compatible with both PrusaSlicer and Bambu Studio
-   **Misc: Test Fit objects (Ball and Socket):** These are trimmed down versions of the head snap fit joint. Due to tolerance variation in printers, there is a chance that the fit could be too tight or too loose. You can print these test files to either dial in your printer settings, or make fine adjustments of the head scale in order to find the fit that works best for you. Note, tight joints will loosen somewhat as they wear-in.
-   **5%-15% Infill.**
-   **3 Walls.**

Check out a quick [Demo Video Here](https://youtu.be/CTClTSPxiHU)!**

**This should generally scale down to about 65% with full articulation, on a well calibrated printer. Your mileage may vary.

Quokka - Articulated Figure

MMM_Quokka_Multicolor_v02_bambuEtc.3mf

MMM_Quokka_Multicolor_v02_prusa.3mf

**Introducing the Rat!** This articulated rodent prints in 3 parts and snap-fits together.  The head has a small pre-support that will have to be removed before it can be snapped into the body.  No slicer supports needed!

Here is a [**video demo**](https://youtu.be/h3b6mKVS7qw) of the model!

*Includes a multicolor 3MF that works in both Bambu Studio and PrusaSlicer

Please, share photos of your makes! I would love to see them!


**PLEASE READ:**
All MatMire Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.

To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my **[Patreon](https://www.patreon.com/matmire_makes)** or **[MMF Tribe](https://www.myminifactory.com/users/MatMireMakes?show=tribe)**.

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!

**This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.*

Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.

**Printing Details**
-   **Head:** Snap-Fit to Body. Pre-Supported for easy printing. No additional support needed.
-   **Body:** Print-In-Place. Snap-Fit to Head. No supports needed.
-   **Tail:** Print-In-Place. Snap-Fit to body. No supports needed.
-   **Multicolor 3MF:** includes a multicolor 3MF that works in both Bambu Studio and PrusaSlicer
-   5%-15% Infill.
-   3 Walls.
Here's a quick [Video](https://youtu.be/h3b6mKVS7qw) of the head and tail assembly.

Rat - Articulated Figure

MMM_Rat_Multicolor_v02_bambuEtc.3mf

MMM_Rat_Multicolor_v02_prusa.3mf

**Introducing my new Platypus design!** A true oddity of the natural world. The more you learn about these funny fellas, the weirder they get. My kind of critter.

It's fully print-in-place, and features a few mechanisms to allow the head to either move freely or pop into a slot that holds it in an upward looking pose. Here's a quick [demo video](https://youtu.be/SYsawWpqvkY) of how it works!

Multicolor 3mf included (works in PrusaSlicer and Bambu Studio)!!

I hope you like it!

Please, share photos of your makes! I would love to see them!

**PLEASE READ:**
All MatMire Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.

To sell PRINTS of MatMire Makes designs, you must obtain authorization by joining the "Merchant" Tier of either my [Patreon](https://www.patreon.com/matmire_makes) or [MMF Tribe](https://tinyurl.com/ye3tx7kb)

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!

Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.

Printing Details

-   **Platypus**: Print-In-Place, No additional support needed.
-   **3MF**: includes multicolor 3MF file (compatible with both PrusaSlicer and Bambu Studio)
-   5%-15% Infill.
-   3 Walls.

Head locking mechanism allows you to pose it looking up. Here's a quick [demo video](https://youtu.be/7H31dzezt44) of how it works!

This should generally scale down to about 65% with full articulation, on a well calibrated printer. Your mileage may vary.

Platypus - Articulated Figure

MMM_Platypus_Multicolor_v01_bambuEtc.3mf

MMM_Platypus_Multicolor_v01_prusa.3mf

**Introducing my articulated Tortoise design!** It's been quite a fun challenge to design of a tortoise that could both stand and retract into it's shell!

It's fully print-in-place, you just have to crack the head free (similar to the bunny and tiger). To help him stand, there are small ball and socket joints on the ends of the legs. Just pull the legs out as far as you can, and they should snap into the position that will allow them to support it's weight. Then pop them back in to let him hide back in his shell. (The first few times might take some extra effort, but they should break-in nicely)

Here is a **[demo video](https://youtu.be/SYsawWpqvkY)** of the model!

Multicolor 3mf included (works in PrusaSlicer and Bambu Studio)!!

**PLEASE READ:**
All MatMire Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.

**To sell PRINTS of my designs**, you must obtain authorization by joining the "Merchant" Tier of either my [Patreon](https://www.patreon.com/matmire_makes) or [MMF Tribe](https://www.myminifactory.com/users/MatMireMakes).

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!

Please, share photos of your makes! I would love to see them!

Printing Details

-   Print-inPlace: no supports
-   Multicolor 3mf included! (will load in Bambu Studio or Prusa Slicer)
-   3 Walls
-   10% infill\
Pulling the legs out fully allows them to pop into sockets. That creates enough tension to make him stand up.  It may be difficult the first few times, but once it breaks-in, it should work with light effort.  The head has built in pre-supports, just twist the head after printing to crack the joint free.\
Here is a **[demo video](https://www.youtube.com/watch?v=SYsawWpqvkY)** of the print.\
This should generally scale down to about 60% with full articulation, on a well calibrated printer. Your mileage may vary.

**This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.*

Tortoise - Articulated Figure

Tortoise_v02R.stl

Tortoise_Multicolor_MMU_v02_bambuEtc.3mf

Tortoise_Multicolor_MMU_v02_prusa.3mf

**A loveably quirky articulated Opossum**, with a poseable mouth so you can make him scream in excitement (or anxiety)!

Here's a quick [demo video](https://youtu.be/MGKBbPxaGE4) of the assembly.

Multicolor 3mf included (works in PrusaSlicer and Bambu Studio)!!

Please, share photos of your makes! I would love to see them!

PLEASE READ:
All MatMire Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.

To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my [Patreon](https://www.myminifactory.com/object/patreon.com/matmire_makes) or [MMF Tribe](https://www.myminifactory.com/users/MatMireMakes).

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!

**This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.*

Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.

**Printing Details**
-   **Head:** Snap-Fit to Body. Pre-Supported for easy printing. No additional support needed.
-   **Jaw:** Snap-Fit to Head. Pre-Supported for easy printing. No additional support needed.
-   **Body:** Print-In-Place. No additional support needed.
-   **Tail:** Snap-Fit to BodyRear.
-   **3MF:** includes multicolor 3MF file that is compatible with both PrusaSlicer and Bambu Studio
-   5%-15% Infill.
-   3 Walls.

Here's a quick [demo video](https://youtu.be/MGKBbPxaGE4) of the assembly.

Opossum - Articulated Figure

Opossum_Head_v01R.stl

MMM_Opossum_MultiColor_v01_BambuEtc.3mf

MMM_Opossum_MultiColor_v01_prusa.3mf

***Updated!...*** Multicolor 3mf file now included!

**Introducing the Ghost Crab!!** I've been wanting to make a crab for quite some time, so it was a lot of fun to design this fella.

This one is a little unique in that most of the joints are designed to hold their posing. The legs do wiggle and flop when in their print position, but twist them around into the standing position and the joints tighten, allowing the legs to hold the body up in many fun poses!

I created a [Demo Video](https://studio.youtube.com/video/YmVHAsbuGNE/edit) of how all the joints work, and how you can replace the legs if you want!

Please, share photos of your makes! I would love to see them!

**PLEASE READ:**
All MatMire Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.

To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe ([myminifactory.com/users/MatMireMakes?show=tribe](https://www.myminifactory.com/users/MatMireMakes?show=tribe))

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!

**Printing Details**
**"GhostCrab_Full" A or B:** These versions are print-in place and ready to go, all in one STL/print.
- The"A" version has standard sized tolerances in the Leg socket joint
- The "B" version has slightly wider tolerances, in case your machine/filament prints with tolerances that are too tight.

**"Separated Parts" folder (Optional):** In this folder you will find the Body and all of the Legs separated out into individual STL files that will allow you to:
- set the legs to print in another color/filament.
- make fine scale adjustments to the legs for better tolerances.
- print individual legs to replace failed parts.

**"Tolerance_Test_Print" (Optional):** [Video Demo](https://youtu.be/0amDkrg1N9c)
- A very fast print with both "A" and "B" leg tolerances. Print it to help choose which works best for you!

- **Multicolor 3MFs:** (Compatible with PrusaSlicer, Bambu Studio, Orca based slicers)
-3 Walls (when using 0.4 mm nozzle. 2 Walls with 0.6mm)\
-10-15% infill (I like Gyroid)

This should generally scale down to about 70% with full articulation, on a well calibrated printer. YMMV

**This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.*

Ghost Crab - Articulated Figure

GhostCrab_Full_A_regularTolerances_v03.stl

GhostCrab_Full_B_widerTolerances_v03.stl

Tolerance_Test_Print_v03.stl

**I hope you like my new Ferret design!** This fella has a new feature that adds another level of fun and posing, belly muscles! Well, not really... but if you simply add a rubber band to special channels along it's belly, it adds the tension needed to keep him standing with his belly off of the ground, yet he still remains super-flexible! Please watch [**This Video**](https://youtu.be/fj8n6YVZI5k) for a demonstration of the model and the proper way to string up the rubber band (it needs to be twisted between each link to work correctly).

In addition, he comes with optional belly extension links, so that you can make your Ferret belly as long as you want! I personally prefer one added extension. They come in two version, style A and B. Both are functionally identical, but have slightly different texturing so that the fur pattern doesn't repeat.

**Updated:* Newer Multicolor 3MF with more fur pattern detailing.

Please, share photos of your makes! I would love to see them!

**PLEASE READ:** All MatMire Makes Designs are protected under Copyright Law.Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.

To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my [**Patreon**](https://www.patreon.com/matmire_makes) or [**MMF Tribe**](https://www.myminifactory.com/users/MatMireMakes?show=tribe).

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!
.
.
**PRINTING DETAILS**
A few of the parts have small connective "anchors" on the first layer to help with bed adhesion. You will need to trim them away before adding the rubber bands.

I use size #12 rubber bands (same size as used in my Bat design), [like these here.](https://www.amazon.com/dp/B0035GE3YA?asc_item-id=amzn1.ideas.1TNMBMGM4SU9F&th=1&qty=1&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&linkCode=ll1&tag=matmiremakes-20&linkId=41fc328f5170fec5d81f12c8c812723d&language=en_US&ref_=as_li_ss_tl)***

- **Head:** Snap-Fit to Body. Pre-Supported for easy printing. No additional support needed. Remove the neck clip pre-support after printing.
- **BodyFront:** Print-In-Place. Snap-Fit to BodyRear or Extensions.
- **BodyRear:** Print-In-Place. Snap-Fit to BodyFront or Extensions.
- **ExtensionA & ExtensionB (optional):** Make the body longer by inserting these in between BodyFront and BodyRear! The only difference between the two is the fur texture, so that you can avoid a repeated fur pattern.
- **Tail:** Snap-Fit to BodyRear.
- **Multicolor 3MFs:** Compatible with PrusaSlicer, Bambu Studio, Orca based slicers. *(for Orca based slicers… it's often better to use File>Import rather than Open Project, so that it doesn't import any printer specific presets/settings.)*
- 5%-15% Infill.
- 3 Walls.
- This should generally scale down to about 65% with full articulation, on a well calibrated printer. YMMV

Please watch **[This Video](https://youtu.be/fj8n6YVZI5k)** for a demonstration of the model and the proper way to string up the rubber band.

**This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.*

Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.

***Paid Link. As an Amazon Associate I earn from qualifying purchases.


Ferret - Articulated Figure

Ferret_BodyFront_v04.stl

Ferret_BodyRear_v04.stl

Ferret_ExtensionA_v04.stl

Ferret_ExtensionB_v04.stl

Ferret_Head_v04.stl

Ferret_Tail_v04.stl

MMM_Ferret_MultiColor_v04_bambuEtc.3mf

MMM_Ferret_MultiColor_v04_prusa.3mf

**I hope you enjoy this articulated Crested Gecko!**
This design comes with two separate snap-fit tail options. In reality, Cresties drop their tails quite easily, and unlike many other lizards... theirs don't grow back. As a result, there are many many cresties out there without tails. I wanted that "frog butt" to be an option for my model too, so you can print either the full tail or the little nub and snap-fit it to the body.

I put together a short video demonstrating the model's features.
This includes the swappable tail options, head pre-support removal, head attachment, and leg locks. [[Watch Here](https://youtu.be/P9llZj7NBvs)]

Please, share photos of your makes! I would love to see them!


**PLEASE READ:**
All MatMire Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use.  You do NOT have permission to resell or redistribute those digital files in ANY way.  This includes altered or "remixed" versions of the designs.  Prints of the design cannot be sold without authorization.

To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe.

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!

Warning: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Furthermore, broken 3D printed parts can create sharp edges and/or points. Not recommended for children under 3.

**Printing Details**
- Body: Print-In-Place.
- Head: Snap-Fit to Body. Pre-Supported for easy printing. Break off pre-support after printing. No additional support needed.
- Full Tail: Print-in-place. Snap-fit to Body
- Nub Tail: Print-in-place. Alternate tail option. Snap-fit to Body
- 5-15% Infill.
- 3 Walls.
Here is a quick video showing the easiest method for snap-fitting the head onto the body: https://youtu.be/P9llZj7NBvs?t=57

This has been test printed as low as 60% with full articulation, on a well calibrated printer. The "full tail" is the part most likely to fail at small sizes, so if you go with the "nub" it can likely scale down even further. YMMV

*Good bed adhesion is a must for successful printing. If you find you are having adhesion issues, use a brim/raft or use the model variants with the custom brims built in. If the custom brim shapes aren't showing up in your slice, try lowering your Initial/First Layer Height.

***This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional SLA results. Resin print at your own risk.**


Crested Gecko - Articulated Figure

mmm-crestedgecko-body-v03r.stl

**Introducing the articulated Bunny Rabbit!!**

**_UPDATED: Multicolor 3MF files now included!_**

I'm excited to share this new design! This is 100% Print-in-place, where one body part pre-supports another as it builds upwards. No additional supports needed! Once printed, you just have to wiggle the joints to break the small contact points and free up the articulation (see video).

Please watch This Video on the best way to free up the joints after printing! Be use extra care when printing in more brittle filaments like silks. Please use 3 walls if you use a 0.4mm nozzle! 

Please, share photos of your makes! I would love to see them!

**PLEASE READ:**
All MatMire Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.

To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe.

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!

Warning: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Furthermore, broken 3D printed parts can create sharp edges and/or points. Not recommended for children under 3.

**Printing Details**
-Print-In-Place. No additional supports needed. Several joints must be wiggled and "cracked" free in order to articulate them. Be Extra careful with brittle filaments, like silks
-Pre-supported version included for extra print stability (recommended). Support is connected to the front legs that must be removed and discarded.
-Multicolor 3MF: Compatible with PrusaSlicer and Bambu Studio
-15%-20% Infill.
-3 Walls when using a 0.4mm nozzle <--This is very important!
-Please watch This Video on the best way to free up the joints!

This model has been successfully printed down to 50%. Below that the joint function may start to become compromised. YMMV

Bunny Rabbit - Articulated Figure

BunnyRabbit__Presupported_v05R.stl

BunnyRabbit__Presupported__MultiColor_v06_prusa.3mf

BunnyRabbit__Presupported__MultiColor_v06.3mf

***UPDATED:  Multicolor 3MF files now included!***
Includes a 4 Color version for most AMS printing, as well as a5 Color version(which more closely matches my hand painted example) for those with multiple AMS units or a 5 tool head printer.

**I'm really excited to share my Articulated Bat!** It makes a really fun fidget toy on its own, but... add a #12 rubber band to each wing and it become really dynamic! (Size #12 rubber bands have been tested from 70%-100% print scale. Outside of that range, different sized bands may be required)

This model is Pre-Supported *(no added supports required).*

For a walkthrough of the model, including how to add the rubber bands, watch this video
For additional info on attaching the head, [watch this video](youtu.be/dbuXpUTG3Dc)
Please, share photos of your makes! I would love to see them!

**PLEASE READ:**
All MatMire_Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use.  You do NOT have permission to resell or redistribute those digital files in ANY way.  This includes altered or "remixed" versions of the designs.  Prints of the design cannot be sold without authorization.

To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe.

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!
Warning: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Furthermore, broken 3D printed parts can create sharp edges and/or points. Not recommended for children under 3.

*This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.

**Printing Details**
- *Body with Custom Brim:* Print-in-Place, Brim geo is built in so no need to generate one.
- *Head with Custom Support:* A small pedestal support is built into the model.  Snap it off when complete.  ***No Additional Supports Needed***
- *Multicolor 3MFs now included:*
- *4 Color:* for most AMS printing
- *5 Color:* for those with multiple AMS units or a 5 tool head printer (like the Prusa XL).
- 10-15% Infill.
- 3 Walls.

*Good bed adhesion is a must for successful printing. If the custom brim shapes aren't showing up in your slice, try lowering your Initial/First Layer Height.

Scale to your liking!  100% creates a model with a roughly 10" wingspan, so that will make it easy to scale it to your desired size. (80% = 8",  75% = 7.5", etc.)  Depending on your printer tolerances, you should be able to print close to 60% before the joint function may start to become compromised. Your mileage may vary

***This model was designed for FDM printing.  It was not designed for Resin printing, and I cannot guarantee good/functional results.  Resin print at your own risk.**

Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.

Bat- Articulated Figure

MMM_Bat_Body_builtinBrim_v04R.stl

MMM_Bat_Head_builtinSupport_v04R.stl

This is a fun addition to our dinosaur collection! It's super fun to play with!

Want more? Thangs Memberships live now!
Commercial License and free models available with subscription!

[ Wanna follow us? Check out our Linktree!](https://linktr.ee/twistyprints)

Print tips!
- Don't go below 80%!
- 2-3 walls
- 10-25% infill
- No supports
- Raft or brim if you have adhesion issues.
- If you have issues with the tall parts, please go slower and check your overhangs!

Creepy Pterodactyl

Articulated Ptero_Colors.3mf

Flexy

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Squirrel, plus Santa Hat version - Articulated Figure

Turkey in a Barrel

Tarantula - Articulated Figure

Quokka - Articulated Figure

Rat - Articulated Figure

Platypus - Articulated Figure

Tortoise - Articulated Figure

Opossum - Articulated Figure

Ghost Crab - Articulated Figure

Ferret - Articulated Figure

Crested Gecko - Articulated Figure

Bunny Rabbit - Articulated Figure

Bat- Articulated Figure

Creepy Pterodactyl