These files are part of my print automation project for the A1 Mini and A1. The files are an upgrade for the A1 Mini to add an external fan which cools down the build plate during the ejection phase. The button is pressed using the extruder head at the end of a print.

Please be careful when printing multicolor objects over 160 mm height with this add on. The same is true for filament cutting when using the AMS for 160 mm single color prints.

You can watch the full YouTube Guide here:
[Automate Your Bambu Lab A1 & A1 Mini, Free & Easy](https://youtu.be/SFd0sxN2eqk)

---

🔹 **DETAILS** 
- detailed print instructions included (material, settings, orientation, size ...)
- Modifiable STEP files
- 3MF files for Bambu Studio

 MATERIALS NEEDED

**Button Holder:**
- 2x  M3x25 mm screws 
(not longer or it might  hit your extruder head)
- 2x M3 nut
- 45x13,5x16 mm button with 450 mm cable and AMS plug 
I used the one included in this kit:
[Button Fan Kit](https://de.aliexpress.com/item/1005008067767560.html)

**Cooling Fan:**
- Do not exceed 24V & 0,5A DC!!!
- 120x120x25 mm size, [the fan I used](https://de.aliexpress.com/item/1005002978096606.html)
- 2x  M4x35 screws mm or longer
- 2x M4 nut


This is plenty of cooling already at half the power (6W). The official Bambu Lab AMS instructions show a maximum current of 0,5A at 24V (12W) but I would not push the limit.
Depending on your fan cable length you may need some kind of cable extension.

If you have a different button, feel free to modify the STEP file for your needs. You can also send me the modified file and I’ll add it to the upload for others to use.

**For the A1:**
The STEP file should be easy to modify to fit the A1 to achieve the same goal. You can also send me the modified files and I'll add them to the upload.

---

🎨 **Filament recommended for this design** 
This is a functional part and printing it with material that maintains its shape under long tension times is recommended, you can use: (*affiliate)
- [Carbon Fiber Reinforced Filaments*](https://go.factoriandesigns.com/Fiber-Reinforced)
- [Polycarbonate (PC)*](https://go.factoriandesigns.com/PC-Polycarbonate)
- [Nylon (PA)*](https://go.factoriandesigns.com/Fiber-Reinforced)
But this part should be fine with [normal PETG*](https://go.factoriandesigns.com/PETG-HF) as well.

I recommend the PETG-CF filament, any color is fine.

A heartfelt thank you to everyone who supports my work!

----

🚩 **For Private Use Only! Commercial License?**

If you're looking to sell my printed models commercially, [upgrading to a seller membership](https://thangs.com/designer/FactorianDesigns/memberships) grants you access and commercial permissions for all my designs. 

Click on the member button at the top for more information and additional benefits!

___

🔥 **More of my Designs**
If you enjoy the art style and wish to sustain my work long-term, consider becoming a member to access premium designs each month at a significant discount! 

Explore all creations here:
[Thangs Profile](https://thangs.com/designer/FactorianDesigns)

or on other platforms:
[Factorian Designs](https://factoriandesigns.com)

____

👉 **3D Printer & Equipment?** 

Get my favorites here!
- [Recommended Equipment & Details](https://factoriandesigns.com/products)
- [Current Favorite Printer](https://go.factoriandesigns.com/Favorite-Printer)
- [Best Budget Printer](https://go.factoriandesigns.com/Budget-Printer)

---
*This post contains affiliate links. If you click through and make a purchase, I may earn a small commission at no extra cost to you. Thank you!

External Fan A1 Mini Print Automation | Button Holder and Fan Holder STEP & 3MF

Button_Holder.3mf

These files are part of my print automation project for the A1 Mini and A1. The files are an upgrade for the A1 Mini tilt the printer at a 20 degree angle to help clear the bed during the ejection phase. 
You can watch the full YouTube video here on how this works:
[Automate your A1 & A1 Mini, Free & Easy](https://youtu.be/SFd0sxN2eqk)

---

🔹 **DETAILS**
- detailed print instructions included (material, settings, orientation, size ...)
- Modifiable STEP files
- 3MF files for Bambu Studio

 MATERIALS NEEDED
- 1x  M4x15-20 mm screw 
(not longer or it might  hit your extruder head)
- 1x M4 nut
- Rubber pads for the sides and bottom
(anything no slip surface you have around)
- A 3mm hex key with at least 100 mm length.

Feel free to modify the STEP files for your needs. You can also send me the modified file and I’ll add it to the upload for others to use.
I recommend placing something rubbery under the front of the A1 Mini so it doesn’t slide away. 

You can also screw the tilt blocks to your printing table and add screws and some kind of limiter block (a simple block with a screw is enough) at the front of the printer.
For the A1:

Some else already made a tilt block model for the A1:
[A1 Tiltblocke Model](https://www.printables.com/model/1012180-bambu-a1-20-degree-tilt-block-for-auto-ejection)

---

🎨 **Filament recommended for this design** 
This is a functional part and I highly recommend printing it with material that maintains its shape under long tension times, you can use:
- [Carbon Fiber Reinforced Filaments*](https://go.factoriandesigns.com/Fiber-Reinforced)
- [Polycarbonate (PC)*](https://go.factoriandesigns.com/PC-Polycarbonate)
- [Nylon (PA)*](https://go.factoriandesigns.com/Fiber-Reinforced)

I recommend the PETG-CF filament, any color is fine.

A heartfelt thank you to everyone who supports my work!

----

🚩 **For Private Use Only! Commercial License?**

If you're looking to sell my printed models commercially, [upgrading to a seller membership](https://thangs.com/designer/FactorianDesigns/memberships) grants you access and commercial permissions for all my designs. 

Click on the member button at the top for more information and additional benefits!

___

🔥 **More of my Designs**
If you enjoy the art style and wish to sustain my work long-term, consider becoming a member to access premium designs each month at a significant discount! 

Explore all creations here:
[Thangs Profile](https://thangs.com/designer/FactorianDesigns)

or on other platforms:
[Factorian Designs](https://factoriandesigns.com)

____

👉 **3D Printer & Equipment?** 

Get my favorites here!
- [Recommended Equipment & Details](https://factoriandesigns.com/products)
- [Current Favorite Printer](https://go.factoriandesigns.com/Favorite-Printer)
- [Best Budget Printer](https://go.factoriandesigns.com/Budget-Printer)

---
*This post contains affiliate links. If you click through and make a purchase, I may earn a small commission at no extra cost to you. Thank you!



FactorianDesigns

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads