Bears on Skates Flexis

BearSkates1Color3MF_FunFam3D.3mf

Mug Trap: Self-Adjusting Coaster

STL_trap_coaster_main.STL

Sleek-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget 

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.
This is the Tight tolerance model.  For the other tolerances, please check out the other versions of the model below:

Medium Tolerance Sleek-Eyed Bone Snake: Coming Soon
Loose Tolerance Sleek Eyed Bone Snake: Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Sleek-Eyed Bone Snake, be sure to check out it’s sibling Round-Eyed Bone Snake:
Tight Tolerance Round-Eyed Bone Snake: Coming Soon
Medium Tolerance Round-Eyed Bone Snake: Coming Soon
Loose Tolerance Round-Eyed Bone Snake: Coming Soon


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Sleek-Eyed Bone Snake - Articulated Snap-Flex Fidget 

M3D - Flexi Baby Axolotl

M3D-BabyAxolotl-V2-scaled-regular.stl

Plastic3D Articulated Otter

Plastic3D Articulated Otter .stl

Mr Rose Bud-Dee

RoseLegFlexi1Color3MF_FunFam3D.3mf

Articulated Bat-Winging It in Style

Plastic3D Articulated Bat.stl

Tree Dragon Fidget

TreeDragonFidget.stl

Flexi Lyra Dragon

lyra flexi f.stl

Christmas Tree with Star

ChristmasTreewithstar.stl

Flexi Bunny Eggs

EggBunnies1Color3MF_FunFam3D.3mf

Baby Grumpy Dragon Keychains 🐉

Grumpy_BabyDragon_Keychain.stl

M3D - Flexi Baby Raptor

M3D_BabyRaptor_v2.stl

Swimming Crocodile

SwimmingCrocodile.stl

Year of the Snake Flexi (Large & Small)

YearOFSnake_Flexi-Large.stl

Garnet Dragon - Articulated Dragon

GarnetDragon_BambuMulticolor_Mimetics3D.3mf

Flexi Robot Lobster

robot (1).3mf

Witch Hat Snappy Cat  - Prepainted 3MF for Bambu Users (Snap-Flex: All Tolerances)

**Print-In-Place, No Supports, Articulating Fidget Toy**

**Pre=Painted 3MF of all Snap-Flex joint tolerances**

The cauldron is bubbling, the potions are pouring, and this mystical kitty is up to no good.  With a twitch of its nose and a flick of its paws it weaves magical spells that defy natures laws.  

As the time slips away through a long boring day you may find that your fingers are growing quite bored.  You may reach for a widget but it doesn't quite fidget like the fun little friend in your pocket that's stored.  

So put that phone away and delightfully play with this witchy  and whiskered fun companion that can only be known by its true name alone, and that moniker is the **Witch Hat Snappy Cat**.

Witch Hat Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.
Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.



**Snap-Flex Collection:**
This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. 

Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

**Snap-Flex Instructions:**
To Lock: Push Body Segments together
To Unlock: Pull Body Segments Apart


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

Please try out each to see what works best for you, and let me know which version you prefer!

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. 

**Recommended Types of FIlament:**
I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

FLEXI

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Bears on Skates Flexis

Mug Trap: Self-Adjusting Coaster

Sleek-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget

M3D - Flexi Baby Axolotl

Plastic3D Articulated Otter

Mr Rose Bud-Dee

Articulated Bat-Winging It in Style

Tree Dragon Fidget

Flexi Lyra Dragon

Christmas Tree with Star

Flexi Bunny Eggs

Baby Grumpy Dragon Keychains 🐉

M3D - Flexi Baby Raptor

Swimming Crocodile

Year of the Snake Flexi (Large & Small)

Garnet Dragon - Articulated Dragon

Flexi Robot Lobster

Witch Hat Snappy Cat - Prepainted 3MF for Bambu Users (Snap-Flex: All Tolerances)

SIMPLE FLEXI CROCODILE - SUPPORT FREE - PRINT IN PLACE

Sly - Articulated Snake, Snap-Flex TWIST