3d Printed mecha model based off the MR-1 Knightmare Frame from Code Geass. Model is designed to be able to fold into the MR-1's "storage form".
Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. 20 AWG wire is used to attach the "slash harkens" to the model. This model is designed to be approximately 1/32nd scale and stands about 5.5" tall (140mm).

MR-1 Knightmare Frame

MR_1_DarkGrey.3mf

**Download Rumi from K-Pop Demon Hunters completely free. This is a sample from our full HUNTR/X collection.**

Full bundle available here: [@3depicmodels](https://than.gs/m/1526142)

K-Pop Demon Hunters - Complete Character Collection
10 print-ready STL files from the hit Netflix animated movie
HUNTR/X: Rumi, Mira, Zoey
Saja Boys: Jinu and the demon boy band
Supporting characters included

Specs:
10cm chibi style figurines
Pre-tested STL files
Resin and FDM compatible
One-piece prints
Layer height: 0.1-0.2mm

**Perfect for K-Pop Demon Hunters fans, Netflix collectors, and 3D printing enthusiasts.**

Rumi K-Pop Demon Hunters - Free Sample STL | Full 10-Character Bundle on Profile

Character_1_Rumi.stl

**Download Elsa from Frozen II completely free. This is a sample from our full Frozen collection.**

Full bundle available here: [@3depicmodels](https://than.gs/m/1526116)

Frozen - Complete Character Collection
14 print-ready STL files from the beloved animated movie
Royal Sisters: Elsa (dress), Elsa (casual), Anna (dress), Anna (casual)
Friends: Olaf, Kristoff, Sven
Spirits: Nokk (water), Bruni (fire), Earth Giant
Northuldra: Yelena, Honeymaren, Ryder
Arendelle: Mattias

Specs:
10cm chibi style figurines
Pre-tested STL files
Resin and FDM compatible
One-piece prints
Layer height: 0.1-0.2mm

**Perfect for Frozen fans, princess collectors, and 3D printing enthusiasts.**

Elsa Frozen II – Free Sample STL | Full 14-Character Bundle on Profile

Character_3_Elsa.stl

**Download Woody from Toy Story completely free. This is a sample from our full Toy Story collection.**

Full bundle available here: [@3depicmodels](https://than.gs/m/1526168)

Toy Story - Complete Character Collection
14 print-ready STL files from the beloved animated movie
Main Characters: Woody, Buzz Lightyear, Jessie, Rex, Hamm, Slinky Dog, Mr. Potato Head, Mrs. Potato Head
Friends: Bo Peep, Bullseye, Forky, Lotso, Zurg, Wheezy

Specs:
10cm chibi style figurines
Pre-tested STL files
Resin and FDM compatible
One-piece prints
Layer height: 0.1-0.2mm

**Perfect for Toy Story fans, Disney collectors, and 3D printing enthusiasts.**

Woody Toy Story - Free Sample STL | Full 12-Character Bundle on Profile

Character_2_Woody.stl

The sale, sharing, and modification of data is prohibited.
**If you wish to sell prints, please obtain a commercial license from here:**
https://www.patreon.com/Manabun_lab

**Create a Multicolor Puzzle with a Single-Color Printer!**
By using 5x2mm magnets, adhesive, and this puzzle data, you can create a colorful puzzle without the need for supports (we recommend adding a brim). By printing the color-coded parts with different filament colors, you can achieve a stunning multicolor effect.

**There is an explanation on how to glue magnets. https://youtu.be/DR4dDgUL4IQ**

The puzzle fun begins with attaching neodymium magnets to each piece. Once completed, challenge your family and friends to solve it! After the fun, it makes a perfect decorative piece for your room.
If you prefer, you can also glue the pieces together directly without magnets to enjoy it as a figurine.

As a bonus, we have also included a model with the puzzle pieces fused together.

**Excited! Enjoy a larger puzzle by enlarging it!**
By enlarging the print to 155%, you can create a big puzzle using 8x3mm magnets! The larger size makes it easier for small children to play with and provides great satisfaction.
For more details, please watch this video: https://youtu.be/y-1LrwWMlUI

**Things to prepare**
**(1)** super glue.

**(2)** 20 pieces of 5x2mm magnets.
Magnets can be purchased on Amazon or AliExpress. I bought mine from here: https://s.click.aliexpress.com/e/_ooTqNVy
Alternatively, you can also purchase them from Bambu Lab with the model number CA-003: https://store.bambulab.com/products/round-magnet
When printing at 155%, please prepare 8x3mm magnets.

**How to make**
**(1)**  Please print the following files: Please print the following files:"Baby_Dragon_primary_color.stl","Baby_Dragon_secondary_color.stl","Baby_Dragon_horn_color.stl"I recommend adding a brim. No support is needed.

You can enjoy the combination of colors by printing in multiple colors. The print data is set to the optimal orientation, so please print as is. 

**(2)** Glue the magnets into the hexagonal holes. (The hole is made hexagonal to prevent the glue from overflowing.) Be careful with the orientation of the magnets, the holes are designed to be loose, so be sure to glue them firmly.

**(3)** Have fun!

Low Poly Baby Dragon Magnet Puzzle (No supports, no AMS)

Baby_Dragon_figurine.stl

Mettaur from the Mega Man Battle Network series. Designed with color separated sections and for those sections to be printed in different colored filaments. Assembly requires glue. Designed to be printed on FDM printer, supports required. Assembled model is approximately 1.75" (45mm) tall.

Mettaur

Mettaur_Print-Helmet.stl

The sale, sharing, and modification of data is prohibited.
**If you wish to sell prints, please obtain a commercial license from here:**
https://www.patreon.com/Manabun_lab

**Create a Multicolor Puzzle with a Single-Color Printer!**
By using 5x2mm magnets, adhesive, and this puzzle data, you can create a colorful puzzle without the need for supports (we recommend adding a brim). By printing the color-coded parts with different filament colors, you can achieve a stunning multicolor effect.

**There is an explanation on how to glue magnets. https://youtu.be/DR4dDgUL4IQ**

The puzzle fun begins with attaching neodymium magnets to each piece. Once completed, challenge your family and friends to solve it! After the fun, it makes a perfect decorative piece for your room.
If you prefer, you can also glue the pieces together directly without magnets to enjoy it as a figurine.

As a bonus, we have also included a model with the puzzle pieces fused together.

**Excited! Enjoy a larger puzzle by enlarging it!**
By enlarging the print to 155%, you can create a big puzzle using 8x3mm magnets! The larger size makes it easier for small children to play with and provides great satisfaction.
For more details, please watch this video: https://youtu.be/y-1LrwWMlUI

**Things to prepare**
**(1)** super glue.

**(2)** 44 pieces of 5x2mm magnets.
Magnets can be purchased on Amazon or AliExpress. I bought mine from here: https://s.click.aliexpress.com/e/_ooTqNVy
Alternatively, you can also purchase them from Bambu Lab with the model number CA-003: https://store.bambulab.com/products/round-magnet

When printing at 155%, please prepare 8x3mm magnets.

**How to make**
**(1)** Please print the following files: "Koi_Puzzle_Black_color.stl","Koi_Puzzle_Red_color.stl","Koi_Puzzle_white_color.stl"I recommend adding a brim. No support is needed.

You can enjoy the combination of colors by printing in multiple colors. The print data is set to the optimal orientation, so please print as is. Individual piece data is also included, and you can print only your favorite parts by comparing it with the file name in the image.

**(2)** Glue the magnets into the hexagonal holes. (The hole is made hexagonal to prevent the glue from overflowing.) Be careful with the orientation of the magnets, the holes are designed to be loose, so be sure to glue them firmly.

**(3)** Have fun!


Low Poly Koi Magnet Puzzle (No supports, no AMS)

Koi_Puzzle_white_color.stl

The sale, sharing, and modification of data is prohibited.
**If you wish to sell prints, please obtain a commercial license from here:**
https://www.patreon.com/Manabun_lab

**Create a Multicolor Puzzle with a Single-Color Printer!**
By using 5x2mm magnets, adhesive, and this puzzle data, you can create a colorful puzzle without the need for supports (we recommend adding a brim). By printing the color-coded parts with different filament colors, you can achieve a stunning multicolor effect.

**There is an explanation on how to glue magnets. https://youtu.be/DR4dDgUL4IQ**

The puzzle fun begins with attaching neodymium magnets to each piece. Once completed, challenge your family and friends to solve it! After the fun, it makes a perfect decorative piece for your room.
If you prefer, you can also glue the pieces together directly without magnets to enjoy it as a figurine.

As a bonus, we have also included a model with the puzzle pieces fused together.

**Excited! Enjoy a larger puzzle by enlarging it!**
By enlarging the print to 155%, you can create a big puzzle using 8x3mm magnets! The larger size makes it easier for small children to play with and provides great satisfaction.
For more details, please watch this video: https://youtu.be/y-1LrwWMlUI

**Things to prepare**
**(1)** super glue.

**(2)** 18 pieces of 5x2mm magnets.
Magnets can be purchased on Amazon or AliExpress. I bought mine from here: https://s.click.aliexpress.com/e/_onmWkGg
Alternatively, you can also purchase them from Bambu Lab with the model number CA-003: https://store.bambulab.com/products/round-magnet
When printing at 155%, please prepare 8x3mm magnets.

**How to make**
**(1)** Please print the following files:"Baby_Fox_Orange_Color.stl","Baby_Fox_White_Color.stl","Baby_Fox_Black_Color.stl"I recommend adding a brim. No support is needed.

You can enjoy the combination of colors by printing in multiple colors. The print data is set to the optimal orientation, so please print as is. 

**(2)** Glue the magnets into the hexagonal holes. (The hole is made hexagonal to prevent the glue from overflowing.) Be careful with the orientation of the magnets, the holes are designed to be loose, so be sure to glue them firmly.

**(3)** Have fun!

Low Poly Baby Fox Magnet Puzzle (No supports, no AMS)

Baby_Fox_Orange_Color.stl

The sale, sharing, and modification of data is prohibited.
**If you wish to sell prints, please obtain a commercial license from here:**https://www.patreon.com/Manabun_lab

**Create a Multicolor Puzzle with a Single-Color Printer!**
By using 5x2mm magnets, adhesive, and this puzzle data, you can create a colorful puzzle without the need for supports (we recommend adding a brim). By printing the color-coded parts with different filament colors, you can achieve a stunning multicolor effect.

**There is an explanation on how to glue magnets. https://youtu.be/DR4dDgUL4IQ**

The puzzle fun begins with attaching neodymium magnets to each piece. Once completed, challenge your family and friends to solve it! After the fun, it makes a perfect decorative piece for your room.
If you prefer, you can also glue the pieces together directly without magnets to enjoy it as a figurine.

As a bonus, we have also included a model with the puzzle pieces fused together.

**Excited! Enjoy a larger puzzle by enlarging it!**
By enlarging the print to 155%, you can create a big puzzle using 8x3mm magnets! The larger size makes it easier for small children to play with and provides great satisfaction.
For more details, please watch this video: https://youtu.be/y-1LrwWMlUI

**Things to prepare**
**(1)** super glue.

**(2)** 51 pieces of 5x2mm magnets. These magnets can be purchased from Amazon or AliExpress. I bought mine from here: https://s.click.aliexpress.com/e/_ooTqNVy
Alternatively, you can also purchase them from Bambu Lab with the model number CA-003. You can buy them from here: https://store.bambulab.com/products/round-magnet
When printing at 155%, please prepare 8x3mm magnets.

**How to make**
**(1)** Please print “dog_primary_color.STL“,“dog_secondary_color.STL”,“dog_Tertiary_color.STL”.No support is needed.

You can enjoy the combination of colors by printing in multiple colors. The print data is set to the optimal orientation, so please print as is. Individual piece data is also included, and you can print only your favorite parts by comparing it with the file name in the image.

**(2)** Glue the magnets into the hexagonal holes. (The hole is made hexagonal to prevent the glue from overflowing.) Be careful with the orientation of the magnets, the holes are designed to be loose, so be sure to glue them firmly.

**(3)** Have fun!


Low Poly Dog "beagle" Magnet Puzzle (No supports, no AMS)

dog_primary_color.stl

The sale, sharing, and modification of data is prohibited.
**If you wish to sell prints, please obtain a commercial license from here:**
https://www.patreon.com/Manabun_lab

**Create a Multicolor Puzzle with a Single-Color Printer!**
By using 5x2mm magnets, adhesive, and this puzzle data, you can create a colorful puzzle without the need for supports (we recommend adding a brim). By printing the color-coded parts with different filament colors, you can achieve a stunning multicolor effect.

**There is an explanation on how to glue magnets. https://youtu.be/DR4dDgUL4IQ**

The puzzle fun begins with attaching neodymium magnets to each piece. Once completed, challenge your family and friends to solve it! After the fun, it makes a perfect decorative piece for your room.
If you prefer, you can also glue the pieces together directly without magnets to enjoy it as a figurine.

As a bonus, we have also included a model with the puzzle pieces fused together.

**Excited! Enjoy a larger puzzle by enlarging it!**
By enlarging the print to 155%, you can create a big puzzle using 8x3mm magnets! The larger size makes it easier for small children to play with and provides great satisfaction.
For more details, please watch this video: https://youtu.be/y-1LrwWMlUI

**Things to prepare**
**(1)** super glue.

**(2)** 40 pieces of 5x2mm magnets.
Magnets can be purchased on Amazon or AliExpress. I bought mine from here: https://s.click.aliexpress.com/e/_ooTqNVy
Alternatively, you can also purchase them from Bambu Lab with the model number CA-003: https://store.bambulab.com/products/round-magnet
When printing at 155%, please prepare 8x3mm magnets.

**How to make**
**(1)** Please print the following files: "Chicken_body_color.stl","Chicken_comb_color.stl","Chicken_Beak_feet_color.stl"I recommend adding a brim. No support is needed.

You can enjoy the combination of colors by printing in multiple colors. The print data is set to the optimal orientation, so please print as is. Individual piece data is also included, and you can print only your favorite parts by comparing it with the file name in the image.

**(2)** Glue the magnets into the hexagonal holes. (The hole is made hexagonal to prevent the glue from overflowing.) Be careful with the orientation of the magnets, the holes are designed to be loose, so be sure to glue them firmly.

**(3)** Have fun!

Low Poly Chicken Magnet Puzzle (No supports, no AMS)

Chicken_body_color.stl

The sale, sharing, and modification of data is prohibited.
**If you wish to sell prints, please obtain a commercial license from here:**
https://www.patreon.com/Manabun_lab

**Create a Multicolor Puzzle with a Single-Color Printer!**
By using 5x2mm magnets, adhesive, and this puzzle data, you can create a colorful puzzle without the need for supports (we recommend adding a brim). By printing the color-coded parts with different filament colors, you can achieve a stunning multicolor effect.

**There is an explanation on how to glue magnets. https://youtu.be/DR4dDgUL4IQ**

The puzzle fun begins with attaching neodymium magnets to each piece. Once completed, challenge your family and friends to solve it! After the fun, it makes a perfect decorative piece for your room.
If you prefer, you can also glue the pieces together directly without magnets to enjoy it as a figurine.

As a bonus, we have also included a model with the puzzle pieces fused together.

**Excited! Enjoy a larger puzzle by enlarging it!**
By enlarging the print to 155%, you can create a big puzzle using 8x3mm magnets! The larger size makes it easier for small children to play with and provides great satisfaction.
For more details, please watch this video: https://youtu.be/y-1LrwWMlUI

**Things to prepare**
**(1)** super glue.

**(2)** 34 pieces of 5x2mm magnets.
Magnets can be purchased on Amazon or AliExpress. 
I bought mine from here: https://s.click.aliexpress.com/e/_ooTqNVy
Alternatively, you can also purchase them from Bambu Lab with the model number CA-003: https://store.bambulab.com/products/round-magnet
When printing at 155%, please prepare 8x3mm magnets.

**How to make**
**(1)** Please print the following files: "Astronaut_Body_color.stl", "Astronaut_face_shield_color.stl","Astronaut_hands_feet_color.stl","Astronaut_Ring_color.stl",I recommend adding a brim. No support is needed.

You can enjoy the combination of colors by printing in multiple colors. The print data is set to the optimal orientation, so please print as is. Individual piece data is also included, and you can print only your favorite parts by comparing it with the file name in the image.

**(2)** Glue the magnets into the hexagonal holes. (The hole is made hexagonal to prevent the glue from overflowing.) Be careful with the orientation of the magnets, the holes are designed to be loose, so be sure to glue them firmly.

**(3)** Have fun!

Low Poly Astronaut Magnet Puzzle (No supports, no AMS)

Astronaut_Body_color.stl

The sale, sharing, and modification of data is prohibited.
**If you wish to sell prints, please obtain a commercial license from here:**
https://www.patreon.com/Manabun_lab

**Create a Multicolor Puzzle with a Single-Color Printer!**
By using 5x2mm magnets, adhesive, and this puzzle data, you can create a colorful puzzle without the need for supports (we recommend adding a brim). By printing the color-coded parts with different filament colors, you can achieve a stunning multicolor effect.

**There is an explanation on how to glue magnets. https://youtu.be/DR4dDgUL4IQ**

The puzzle fun begins with attaching neodymium magnets to each piece. Once completed, challenge your family and friends to solve it! After the fun, it makes a perfect decorative piece for your room.
If you prefer, you can also glue the pieces together directly without magnets to enjoy it as a figurine.

As a bonus, we have also included a model with the puzzle pieces fused together.

**Excited! Enjoy a larger puzzle by enlarging it!**
By enlarging the print to 155%, you can create a big puzzle using 8x3mm magnets! The larger size makes it easier for small children to play with and provides great satisfaction.
For more details, please watch this video: https://youtu.be/y-1LrwWMlUI

**Things to prepare**
**(1)** super glue.

**(2)** 58 pieces of 5x2mm magnets.
Magnets can be purchased on Amazon or AliExpress. I bought mine from here: https://s.click.aliexpress.com/e/_ooTqNVy
Alternatively, you can also purchase them from Bambu Lab with the model number CA-003: https://store.bambulab.com/products/round-magnet
When printing at 155%, please prepare 8x3mm magnets.

**How to make**
**(1)**This puzzle is divided into Red_Macaw_Parrot and Blue_Macaw_Parrot folders to make it easy to print two different patterns. Both folders contain models with the same shape, differing only in color distribution.
Please refer to the included PDF and print the STL files within the respective folders.
I recommend adding a brim. No support is needed.

You can enjoy the combination of colors by printing in multiple colors. The print data is set to the optimal orientation, so please print as is. Individual piece data is also included, and you can print only your favorite parts by comparing it with the file name in the image.

**(2)** Glue the magnets into the hexagonal holes. (The hole is made hexagonal to prevent the glue from overflowing.) Be careful with the orientation of the magnets, the holes are designed to be loose, so be sure to glue them firmly.

**(3)** Have fun!

Low Poly Macaw Parrot Magnet Puzzle (No supports, no AMS)

Macaw_Parrot_figurine.stl

The sale, sharing, and modification of data is prohibited.
**If you wish to sell prints, please obtain a commercial license from here:**
https://www.patreon.com/Manabun_lab

**Create a Multicolor Puzzle with a Single-Color Printer!**
By using 5x2mm magnets, adhesive, and this puzzle data, you can create a colorful puzzle without the need for supports (we recommend adding a brim). By printing the color-coded parts with different filament colors, you can achieve a stunning multicolor effect.

**There is an explanation on how to glue magnets. https://youtu.be/DR4dDgUL4IQ**

The puzzle fun begins with attaching neodymium magnets to each piece. Once completed, challenge your family and friends to solve it! After the fun, it makes a perfect decorative piece for your room.
If you prefer, you can also glue the pieces together directly without magnets to enjoy it as a figurine.

As a bonus, we have also included a model with the puzzle pieces fused together.

**Excited! Enjoy a larger puzzle by enlarging it!**
By enlarging the print to 155%, you can create a big puzzle using 8x3mm magnets! The larger size makes it easier for small children to play with and provides great satisfaction.
For more details, please watch this video: https://youtu.be/y-1LrwWMlUI

**Things to prepare**
**(1)** super glue.

**(2)** 62 pieces of 5x2mm magnets.
Magnets can be purchased on Amazon or AliExpress. I bought mine from here: https://s.click.aliexpress.com/e/_ooTqNVy
Alternatively, you can also purchase them from Bambu Lab with the model number CA-003: https://store.bambulab.com/products/round-magnet
When printing at 155%, please prepare 8x3mm magnets.

**How to make**
**(1)** Please print the following files: "Majestic_Dragon_primary_color.stl", "Majestic_Dragon_secondary_color.stl","Majestic_Dragon_tongue_color.stl", I recommend adding a brim. No support is needed.

You can enjoy the combination of colors by printing in multiple colors. The print data is set to the optimal orientation, so please print as is. Individual piece data is also included, and you can print only your favorite parts by comparing it with the file name in the image.

**(2)** Glue the magnets into the hexagonal holes. (The hole is made hexagonal to prevent the glue from overflowing.) Be careful with the orientation of the magnets, the holes are designed to be loose, so be sure to glue them firmly.

**(3)** Have fun!

Low Poly Majestic Dragon Magnet Puzzle (No supports, no AMS)

Majestic_Dragon_primary_color.stl

The sale, sharing, and modification of data is prohibited.
**If you wish to sell prints, please obtain a commercial license from here:**
https://www.patreon.com/Manabun_lab

**Create a Multicolor Puzzle with a Single-Color Printer!**
By using 5x2mm magnets, adhesive, and this puzzle data, you can create a colorful puzzle without the need for supports (we recommend adding a brim). By printing the color-coded parts with different filament colors, you can achieve a stunning multicolor effect.

**There is an explanation on how to glue magnets. https://youtu.be/DR4dDgUL4IQ**

The puzzle fun begins with attaching neodymium magnets to each piece. Once completed, challenge your family and friends to solve it! After the fun, it makes a perfect decorative piece for your room.
If you prefer, you can also glue the pieces together directly without magnets to enjoy it as a figurine.

As a bonus, we have also included a model with the puzzle pieces fused together.

**Excited! Enjoy a larger puzzle by enlarging it!**
By enlarging the print to 155%, you can create a big puzzle using 8x3mm magnets! The larger size makes it easier for small children to play with and provides great satisfaction.
For more details, please watch this video: https://youtu.be/y-1LrwWMlUI

**Things to prepare**
**(1)** super glue.

**(2)** 46 pieces of 5x2mm magnets.
Magnets can be purchased on Amazon or AliExpress. I bought mine from here: https://s.click.aliexpress.com/e/_ooTqNVy
Alternatively, you can also purchase them from Bambu Lab with the model number CA-003: https://store.bambulab.com/products/round-magnet
When printing at 155%, please prepare 8x3mm magnets.

How to make
**(1)** Please print the following files: "Puzzle_Snake_primary_color.stl", "Puzzle_Snake_secondary_color.stl", 
I recommend adding a brim. No support is needed.
**

You can enjoy the combination of colors by printing in multiple colors. The print data is set to the optimal orientation, so please print as is. Individual piece data is also included, and you can print only your favorite parts by comparing it with the file name in the image.

**(2)** Glue the magnets into the hexagonal holes. (The hole is made hexagonal to prevent the glue from overflowing.) Be careful with the orientation of the magnets, the holes are designed to be loose, so be sure to glue them firmly.

**(3)** Have fun!


Low Poly Snake Magnet Puzzle (No supports, no AMS)

Puzzle_Snake_primary_color.stl

The sale, sharing, and modification of data is prohibited.
**If you wish to sell prints, please obtain a commercial license from here:**
https://www.patreon.com/Manabun_lab

**Create a Multicolor Puzzle with a Single-Color Printer!**
By using 5x2mm magnets, adhesive, and this puzzle data, you can create a colorful puzzle without the need for supports (we recommend adding a brim). By printing the color-coded parts with different filament colors, you can achieve a stunning multicolor effect.

**There is an explanation on how to glue magnets. https://youtu.be/DR4dDgUL4IQ**

The puzzle fun begins with attaching neodymium magnets to each piece. Once completed, challenge your family and friends to solve it! After the fun, it makes a perfect decorative piece for your room.
If you prefer, you can also glue the pieces together directly without magnets to enjoy it as a figurine.

As a bonus, we have also included a model with the puzzle pieces fused together.

**Excited! Enjoy a larger puzzle by enlarging it!**
By enlarging the print to 155%, you can create a big puzzle using 8x3mm magnets! The larger size makes it easier for small children to play with and provides great satisfaction.
For more details, please watch this video: https://youtu.be/y-1LrwWMlUI

**Things to prepare**
**(1)** super glue.

**(2)** 56 pieces of 5x2mm magnets. These magnets can be purchased from Amazon or AliExpress. I bought mine from here: https://s.click.aliexpress.com/e/_ooTqNVy
Alternatively, you can also purchase them from Bambu Lab with the model number CA-003. You can buy them from here: https://store.bambulab.com/products/round-magnet
When printing at 155%, please prepare 8x3mm magnets.

**How to make**
**(1)** Please print "Triceratops_primary_color.stl","Triceratops_secondary_color.stl","Triceratops_tongue_color.stl".I recommend adding a brim. **No support is needed.**

You can enjoy the combination of colors by printing in multiple colors. The print data is set to the optimal orientation, so please print as is. Individual piece data is also included, and you can print only your favorite parts by comparing it with the file name in the image.

**(2)** Glue the magnets into the hexagonal holes. (The hole is made hexagonal to prevent the glue from overflowing.) Be careful with the orientation of the magnets, the holes are designed to be loose, so be sure to glue them firmly.

**(3)** Have fun! 

Low Poly Triceratops Magnet Puzzle (No supports, no AMS)

Triceratops_primary_color.stl

The sale, sharing, and modification of data is prohibited.
**If you wish to sell prints, please obtain a commercial license from here:
**
https://www.patreon.com/Manabun_lab

**Create a Multicolor Puzzle with a Single-Color Printer!**
By using 5x2mm magnets, adhesive, and this puzzle data, you can create a colorful puzzle without the need for supports (we recommend adding a brim). By printing the color-coded parts with different filament colors, you can achieve a stunning multicolor effect.

**There is an explanation on how to glue magnets. https://youtu.be/DR4dDgUL4IQ**

The puzzle fun begins with attaching neodymium magnets to each piece. Once completed, challenge your family and friends to solve it! After the fun, it makes a perfect decorative piece for your room.
If you prefer, you can also glue the pieces together directly without magnets to enjoy it as a figurine.

As a bonus, we have also included a model with the puzzle pieces fused together.

**Excited! Enjoy a larger puzzle by enlarging it!**
By enlarging the print to 155%, you can create a big puzzle using 8x3mm magnets! The larger size makes it easier for small children to play with and provides great satisfaction.
For more details, please watch this video: https://youtu.be/y-1LrwWMlUI

**Things to prepare**
**(1)** super glue.

**(2)** 46 pieces of 5x2mm magnets. These magnets can be purchased from Amazon or AliExpress. I bought mine from here: https://s.click.aliexpress.com/e/_ooTqNVy
Alternatively, you can also purchase them from Bambu Lab with the model number CA-003. You can buy them from here: https://store.bambulab.com/products/round-magnet
When printing at 155%, please prepare 8x3mm magnets.

**How to make**
**(1)** Please print “squirrel_primary_color.stl“,“squirrel_secondary_color.stl”,“squirrel_acorn_color.stl”,“squirrel_acorn_cup_color.stl”.**I recommend adding a brim.**No support is needed.

You can enjoy the combination of colors by printing in multiple colors. The print data is set to the optimal orientation, so please print as is. Individual piece data is also included, and you can print only your favorite parts by comparing it with the file name in the image.

**(2)** Glue the magnets into the hexagonal holes. (The hole is made hexagonal to prevent the glue from overflowing.) Be careful with the orientation of the magnets, the holes are designed to be loose, so be sure to glue them firmly.

**(3)** Have fun!

Low Poly Squirrel Magnet Puzzle (No supports, no AMS)

squirrel_primary_color.stl

The sale, sharing, and modification of data is prohibited.
**If you wish to sell prints, please obtain a commercial license from here:**
https://www.patreon.com/Manabun_lab

**Create a Multicolor Puzzle with a Single-Color Printer!**
By using 5x2mm magnets, adhesive, and this puzzle data, you can create a colorful puzzle without the need for supports (we recommend adding a brim). By printing the color-coded parts with different filament colors, you can achieve a stunning multicolor effect.

**There is an explanation on how to glue magnets. https://youtu.be/DR4dDgUL4IQ**

The puzzle fun begins with attaching neodymium magnets to each piece. Once completed, challenge your family and friends to solve it! After the fun, it makes a perfect decorative piece for your room.
If you prefer, you can also glue the pieces together directly without magnets to enjoy it as a figurine.

As a bonus, we have also included a model with the puzzle pieces fused together.

**Excited! Enjoy a larger puzzle by enlarging it!**
By enlarging the print to 155%, you can create a big puzzle using 8x3mm magnets! The larger size makes it easier for small children to play with and provides great satisfaction.
For more details, please watch this video: https://youtu.be/y-1LrwWMlUI

**Things to prepare**
**(1)** super glue.

**(2)** 46 pieces of 5x2mm magnets. These magnets can be purchased from Amazon or AliExpress. I bought mine from here: https://s.click.aliexpress.com/e/_ooTqNVy
Alternatively, you can also purchase them from Bambu Lab with the model number CA-003. You can buy them from here: https://store.bambulab.com/products/round-magnet
When printing at 155%, please prepare 8x3mm magnets.

**How to make**
**(1)** Please print "frog_primary_color.stl","frog_Secondary_color.stl","frog_Tertiary_color.stl","frog_eye_color.stl".If you print these files, you can reproduce the tree frog.I recommend adding a brim.No support is needed.

You can enjoy the combination of colors by printing in multiple colors. The print data is set to the optimal orientation, so please print as is. Individual piece data is also included, and you can print only your favorite parts by comparing it with the file name in the image.

**(2)** Glue the magnets into the hexagonal holes. (The hole is made hexagonal to prevent the glue from overflowing.) Be careful with the orientation of the magnets, the holes are designed to be loose, so be sure to glue them firmly.

**(3)** Have fun!

Low Poly Frog Magnet Puzzle (No supports, no AMS)

frog_primary_color.stl

The sale, sharing, and modification of data is prohibited.
**If you wish to sell prints, please obtain a commercial license from here:**
https://www.patreon.com/Manabun_lab

**Create a Multicolor Puzzle with a Single-Color Printer!**
By using 5x2mm magnets, adhesive, and this puzzle data, you can create a colorful puzzle without the need for supports (we recommend adding a brim). By printing the color-coded parts with different filament colors, you can achieve a stunning multicolor effect.

**There is an explanation on how to glue magnets. https://youtu.be/DR4dDgUL4IQ**

The puzzle fun begins with attaching neodymium magnets to each piece. Once completed, challenge your family and friends to solve it! After the fun, it makes a perfect decorative piece for your room.
If you prefer, you can also glue the pieces together directly without magnets to enjoy it as a figurine.

As a bonus, we have also included a model with the puzzle pieces fused together.

**Excited! Enjoy a larger puzzle by enlarging it!**
By enlarging the print to 155%, you can create a big puzzle using 8x3mm magnets! The larger size makes it easier for small children to play with and provides great satisfaction.
For more details, please watch this video: https://youtu.be/y-1LrwWMlUI

**Things to prepare**
**(1)** super glue.

**(2)** 52 pieces of 5x2mm magnets. These magnets can be purchased from Amazon or AliExpress. I bought mine from here: https://s.click.aliexpress.com/e/_ooTqNVy
Alternatively, you can also purchase them from Bambu Lab with the model number CA-003. You can buy them from here: https://store.bambulab.com/products/round-magnet
When printing at 155%, please prepare 8x3mm magnets.

**How to make**
**(1)** Please print "Gorilla_primary_color.stl","Gorilla_secondary_color.stl".Please add a brim because there is a piece with a small contact surface.No support is needed.

You can enjoy the combination of colors by printing in multiple colors. The print data is set to the optimal orientation, so please print as is. Individual piece data is also included, and you can print only your favorite parts by comparing it with the file name in the image.

**(2)** Glue the magnets into the hexagonal holes. (The hole is made hexagonal to prevent the glue from overflowing.) Be careful with the orientation of the magnets, the holes are designed to be loose, so be sure to glue them firmly.

**(3)** Have fun!


Low Poly Gorilla Magnet Puzzle (No supports, no AMS)

Gorilla_primary_color.stl

The sale, sharing, and modification of data is prohibited.
**If you wish to sell prints, please obtain a commercial license from here:**
https://www.patreon.com/Manabun_lab

**Create a Multicolor Puzzle with a Single-Color Printer!**
By using 5x2mm magnets, adhesive, and this puzzle data, you can create a colorful puzzle without the need for supports (we recommend adding a brim). By printing the color-coded parts with different filament colors, you can achieve a stunning multicolor effect.

**There is an explanation on how to glue magnets. https://youtu.be/DR4dDgUL4IQ**

The puzzle fun begins with attaching neodymium magnets to each piece. Once completed, challenge your family and friends to solve it! After the fun, it makes a perfect decorative piece for your room.
If you prefer, you can also glue the pieces together directly without magnets to enjoy it as a figurine.

As a bonus, we have also included a model with the puzzle pieces fused together.

**Excited! Enjoy a larger puzzle by enlarging it!**
By enlarging the print to 155%, you can create a big puzzle using 8x3mm magnets! The larger size makes it easier for small children to play with and provides great satisfaction.
For more details, please watch this video: https://youtu.be/y-1LrwWMlUI

**Things to prepare**
**(1)** super glue.

**(2)** 52 pieces of 5x2mm magnets. These magnets can be purchased from Amazon or AliExpress. I bought mine from here: https://s.click.aliexpress.com/e/_ooTqNVy
Alternatively, you can also purchase them from Bambu Lab with the model number CA-003. You can buy them from here: https://store.bambulab.com/products/round-magnet
When printing at 155%, please prepare 8x3mm magnets.

**How to make**
**(1)** I have prepared data with two types of rabbit patterns separated by color. You can choose your favorite rabbit pattern. The two rabbits have exactly the same pieces.
Please print ‘rabbit_primary_color.stl’and‘rabbit_secondary_color.stl’or‘Dutch_rabbit_primary_color.stl’and‘DDutch_rabbit_secondary_color.stl’.If you feel the adhesion to the bed is weak, I recommend adding a brim. No support is needed. 

You can enjoy the combination of colors by printing in multiple colors. The print data is set to the optimal orientation, so please print as is. Individual piece data is also included, and you can print only your favorite parts by comparing it with the file name in the image.

**(2)** Glue the magnets into the hexagonal holes. (The hole is made hexagonal to prevent the glue from overflowing.) Be careful with the orientation of the magnets, the holes are designed to be loose, so be sure to glue them firmly.

**(3)** Have fun!

Low Poly Rabbit Magnet Puzzle (No supports, no AMS)

low_poly_rabbit_figurine.stl

The sale, sharing, and modification of data is prohibited.
**If you wish to sell prints, please obtain a commercial license from here:**https://www.patreon.com/Manabun_lab

**Create a Multicolor Puzzle with a Single-Color Printer!**
By using 5x2mm magnets, adhesive, and this puzzle data, you can create a colorful puzzle without the need for supports (we recommend adding a brim). By printing the color-coded parts with different filament colors, you can achieve a stunning multicolor effect.

**There is an explanation on how to glue magnets. https://youtu.be/DR4dDgUL4IQ**

The puzzle fun begins with attaching neodymium magnets to each piece. Once completed, challenge your family and friends to solve it! After the fun, it makes a perfect decorative piece for your room.
If you prefer, you can also glue the pieces together directly without magnets to enjoy it as a figurine.

As a bonus, we have also included a model with the puzzle pieces fused together.

**Excited! Enjoy a larger puzzle by enlarging it!**
By enlarging the print to 155%, you can create a big puzzle using 8x3mm magnets! The larger size makes it easier for small children to play with and provides great satisfaction.
For more details, please watch this video: https://youtu.be/y-1LrwWMlUI

**Things to prepare**
**(1)** super glue.

**(2)** 49 pieces of 5x2mm magnets. These magnets can be purchased from Amazon or AliExpress. I bought mine from here: https://s.click.aliexpress.com/e/_ooTqNVy
Alternatively, you can also purchase them from Bambu Lab with the model number CA-003. You can buy them from here: https://store.bambulab.com/products/round-magnet
When printing at 155%, please prepare 8x3mm magnets.

**How to make**
**(1)** Please print “horse_primary_color.stl“,“horse_secondary_color.stl”,“horse_Tertiary_color.stl”.
If you want to make a unicorn, please print the horn “unicorn_horn_color.stl” as well. Combine it with the forehead piece included in “horse_Tertiary_color.stl”.No support is needed.

You can enjoy the combination of colors by printing in multiple colors. The print data is set to the optimal orientation, so please print as is. Individual piece data is also included, and you can print only your favorite parts by comparing it with the file name in the image.

**(2)** Glue the magnets into the hexagonal holes. (The hole is made hexagonal to prevent the glue from overflowing.) Be careful with the orientation of the magnets, the holes are designed to be loose, so be sure to glue them firmly.

**(3)** Have fun!

Low Poly Horse and Unicorn Magnet Puzzle (No supports, no AMS)

horse_primary_color.stl

# ⚔️ Cyber Oni-Samurai 13 – Dummy 13 Custom Figurine  

A cybernetic Oni warrior brought to life!  
This figurine is built on the **Dummy 13 platform**, scaled up to **150%** to better capture the intricate details of the face, horns, and armor.  

The design is split into **4 plates**, making it easier to manage the build, mix materials, and customize your colors.  

---

## 🧩 Plates & Print Setup  

**Plate 1 – Frame**  
- 🔧 Best printed in **PETG** (recommended for joints).  
- **ABS/ASA** works best for long-term durability.  
- PLA is not recommended (stiff, brittle, and creeps under stress), though it can work if it’s all you have.  
- ⚠️ Expect tighter joints, possible snapping, and loosening over time if you go with PLA.  

*(Frame material recommendations adapted from @soozafone’s original Dummy 13 v1.0 post.)*  

---

**Plate 2 – Head Armor**  
- 🎨 Printed with **PLA** (AMS multi-color setup).  
- Easier to swap AMS filaments than to paint the head (though painting works too).  
- **Recommended Settings:**  
  - Layer Height: **0.12 mm**  
  - Supports: **Tree Supports Slim**  
- Be gentle removing supports from the **hair** – proper calibration will give you a clean result.  
- ✅ I ran a full calibration and maintenance pass before printing the head, highly recommended.  

---

**Plate 3 – Armor**  
- Printed in **PLA**.  
- Designed for multi-color printing – most parts are separated for easy AMS swaps.  
- ⚠️ Chest piece is not separated (too late in the design to redo).  
- Supports: **Tree Supports Slim** are required.  

---

**Plate 4 – Sword & Sheath**  
- Printed in **PLA**.  
- Simple weapon accessory to complete the Oni-Samurai aesthetic.  

---

## 🎨 Filament Recommendations  

**Armor parts:**  
- Works with PLA, PETG, or ASA.  

**Frame parts:**  
- Best with **ABS/ASA**, **PETG** also works.  
- PLA is possible, but expect issues with joints over time.  

---

## ⚔️ Final Notes  

- Platform scaled up to **150%** for better detail.  
- Total: **4 plates**.  
- Color scheme is flexible – swap filaments in AMS or remix your palette.  

---

## 🧵 Recommended Filaments (Affiliate Links)  
If you’d like to try the filaments I use and support my work, here are affiliate links (I may earn a small commission at no extra cost to you):  

**PLA Filaments**  
- [Overture PLA](https://amzn.to/3V8SXac)  
- [Polymaker PLA](https://amzn.to/45pdmhj)  
- [Anycubic PLA](https://amzn.to/45VPK3T)  

**PETG Filaments**  
- [Overture PETG](https://amzn.to/4mIeTog)  
- [Elegoo Rapid PETG](https://amzn.to/4oGvpqD)  
- [Anycubic PETG](https://amzn.to/4fMKTFG)  

---

 


Cyber Oni-Samurai 13

Cyber_Samurai_Project.3mf

**Amefuri Kozō – Chibi YokaiZ Collection
**
This model is part of the **Chibi YokaiZ** collection. Check out our growning collection on our [Patreon!](https://www.patreon.com/c/shojostudio/shop)

Optimized for resin printing, but also compatible with FDM printers.

Most YokaiZ characters are designed to stand on their own without the need for a base.

They have been printed as 5 cm tall figures.

**Included in the archive:
**
3 model files (unsupported – requires slicing)
Formats: OBJ, STL, 3MF

**Recommended Print Settings:
**
- Layer Resolution: 0.16 mm
- Supports: Yes (Tree supports recommended)
- Brim: Yes

**License: Commercial Use**
To sell physical prints, you must be an active subscriber to our Patreon: [patreon.com/shojostudio](https://www.patreon.com/shojostudio)

Please note: digital files may not be shared or resold under any circumstances.

We hope you enjoy printing and painting this Chibi YokaiZ as much as we enjoyed creating it!

**3D printing settings
**Layer Resolution: 0.16 mm
Supports: Yes (Tree supports recommended)
Brim: Yes

Amefuri Kozō - Chibi YokaiZ

Amefuri Kozō.3mf

**Amabie – Chibi YokaiZ Collection
**
This model is part of the Chibi YokaiZ collection. Find the growing collection on our [Patreon!](https://www.patreon.com/c/shojostudio/shop)

Optimized for resin printing, but also compatible with FDM printers.

Most YokaiZ characters are designed to stand on their own without the need for a base.

They have been printed as 5 cm tall figures.

**Included in the archive:
**
3 model files (unsupported – requires slicing)
Formats: OBJ, STL, 3MF

**Recommended Print Settings:
**
- Layer Resolution: 0.16 mm
- Supports: Yes (Tree supports recommended)
- Brim: Yes

**License: Commercial Use
**
To sell physical prints, you must be an active subscriber to our Patreon: [patreon.com/shojostudio](https://www.patreon.com/c/shojostudio)

Please note: digital files may not be shared or resold under any circumstances.

We hope you enjoy printing and painting this Chibi YokaiZ as much as we enjoyed creating it!

**3D printing settings
**
- Layer Resolution: 0.16 mm
- Supports: Yes (Tree supports recommended)
- Brim: Yes

Amabie - Chibi YokaiZ

Amabie.3mf

**Tippi Tipmas everyone :D**

Here are some new seasonal accessories for your [Tippi Tree!](https://than.gs/m/933018?affiliateCode=MAKE) (game sold separately)

---

**_Printing Guidelines_**

All parts print without supports using default print settings. Download includes 'Combined' versions of the hats so you can just do a filament swap, or print in 3 separate pieces and glue together. In either case the Pom Pom is printed separately.

To make the Brim and Pom Pom look extra fluffy, I  sliced those parts using 'Fuzzy Skin' set to 'Contour' or 'Outer Walls Only' with Point distance 0.2mm and Thickness 0.3mm.

The Santa Beard just snaps into place. Glue optional.

---


Tippi Tree Santa + Finch Santa

Tippi_Santa_Hat_Combined.stl

Figurine of a bull, in 3MF format, pre-painted. 
Supports are needed, we used auto tree supports at 30 degree threshold angle successfully. 
Filaments used in photos- Polymaker Polyterra Earth Brown PLA, Polylite Black PLA, Polylite Jungle Green PLA and Polylite Muted White PLA for the hoofs and horns.

Bull

Bull Painted.3mf

**This adorable baby dragon is bursting with charm and whimsy, making it the perfect addition to any collection or decor.**

**If you like this model don't forget to check the new [Baby Dragon Skeleton Figurine](https://than.gs/m/1451412)!**

It's super easy to print as it needs no supports at all! Also it looks beautiful printed in a single color but even better in colors.

I decided to use Spyro colors on him and it suits him very well!

Get creative and please share your makes so I can keep creating more beautiful models.

"_If you love this model, please let me know by giving it a like and uploading your makes and check out the rest of my catalog for more beautiful models._"

----------------------------------------------------------

**3D PRINTING SETTINGS:**

-No supports needed
-2 Walls, 3-5% rectlinear infill at least, 0.16mm layer height or less is recommended
-If printed in colors 0.2mm layer height works well
-Includes 3MF Factory Files for Bambu Studio

----------------------------------------------------------


**All IK3D designs are Copyrighted and for PERSONAL USE ONLY. To sell prints of my models, you can subscribe to my Patreon or Thangs with the commercial tier membership. Digital files can’t be shared or resold!**

➡️[Patreon IK3D](https://www.patreon.com/c/IK3D)

➡️[Thangs IK3D](https://thangs.com/designer/IK3D/memberships)

➡️[You are welcome to follow my socials, check all my links or contact me here!](linktr.ee/ik3d)
 

FIgurine

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Clips

Cyber Oni-Samurai 13

Amefuri Kozō - Chibi YokaiZ

Amabie - Chibi YokaiZ

Tippi Tree Santa + Finch Santa

Bull

Adorable Baby Dragon Figurine / 3MF Included / No Supports

Cyber Oni-Samurai 13

Amefuri Kozō - Chibi YokaiZ

Amabie - Chibi YokaiZ

Tippi Tree Santa + Finch Santa

Bull

Adorable Baby Dragon Figurine / 3MF Included / No Supports

MR-1 Knightmare Frame

Rumi K-Pop Demon Hunters - Free Sample STL | Full 10-Character Bundle on Profile

Woody Toy Story - Free Sample STL | Full 12-Character Bundle on Profile

Low Poly Baby Dragon Magnet Puzzle (No supports, no AMS)

Mettaur