The Tamiya Grasshopper II, Super Hornet, and Rising Fighter have a standard front suspension have the ability to use oil filled shocks which was an improvement on the originals but they suffer from tragic camber gain and bump steer. Not to mention the wobble they create when reversing due to the geometry. We have engineered a total replacement front lower control arm, upright and upper link mount to give these cars a double wishbone front suspension that looks like it was intended to be there. Zero modifications are needed to your bodies and all hardware needed is standard. We have a full installation video (episode 32) on our YouTube channel. and links to pre-printed and STL files are at AMProEngineering.com . 

The front end is shown in images are on the GH2 (white), Super Hornet (silver) and Rising Fighter (red).

All parts needed are attached on one sprue. 

Please see video before purchase:

Parts included are:
045026 0L Left Up.stl
045026 0R Right Up.stl
074002 04 Lower Brace.stl
074002 05 Upper Brace.stl
58074 02 1 1 Left Arm.stl
58074 03 1 1 Right Arm.stl

Super Hornet, Rising Fighter and Grasshopper II Double Wishbone Front Suspension

074002-01_1-1_gh_front_end.stl

The Tamiya Rising fighter has a very strange stance. The rear is in the air and this can create some strange handling characteristics and will raise the CG. We have created a rear shock mount similar to the Tamiya Super Hornet which will allow the rear of the car to sit lower and use all the original parts still. This is compatible with the AMPro trans brace. If you have a shelf queen, you can add the exhaust tips (one or two). Please see the video before purchase to see the hardware you will need to for the assembly and how to drill and clean the screw holes. 

Tamiya Rising Fighter Rear Shock Mount

416002-01_suspension_crossbar.stl

The Transmission brace will prevent the transmission from locking itself up to its bump stops under acceleration. This behavior will prevent the rear shocks from doing anything when accelerating. The AMPro brace holds the center of the trans in place but still allows for full articulation and as a result, a rear suspension with movement while you are under full throttle. Please see the video prior to purchase. 

Tamiya Rising Fighter Transmission Brace

416003-01_1-1.stl

**K-Pop Demon Hunters - Complete Character Collection**
10 print-ready STL files from the Korean animated series
What's Included:

Demon Hunters: Rumi, Mira, Zoey, Jinu, Gwi-Ma, Mystery, Abby, Romance, Baby
Duo: Dark Derphy with Susie

Specs:

10cm chibi style figurines
Pre-tested STL files
Resin & FDM compatible
One-piece prints
Layer height: 0.1-0.2mm

**Perfect for K-pop fans, anime collectors, and 3D printing enthusiasts!**

FIghter

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Super Hornet, Rising Fighter and Grasshopper II Double Wishbone Front Suspension

Tamiya Rising Fighter Rear Shock Mount

Tamiya Rising Fighter Transmission Brace

K-Pop Demon Hunters STL Files - Rumi Mira Zoey - Anime 3D Print Models