Hero Me Documentation - Details.stl

Documentation Membership Details.stl

5.5mm Nozzle Endoscope Mount for Bullseye

***Model originally uploaded to Thingiverse at*** https://www.thingiverse.com/thing:5828734

***Concept***
A 5.5mm endoscope mounting plate for the Petsfang Bullseye.


***Usage***
You will need to print:
- [1x] Endoscope mount

You will also need a M3x10 (or longer) screw and nut to keep the endoscope from slipping and rotating.


***Updates***
2023.02.01 - Initial release. **NEW:** 5.5mm nozzle endoscope Mount Bullseye Front v2

***History***
Had a go at making my own endoscope mount using the BLTouch mount on the side, but ended up giving up due to my endoscope constantly shifting in the PLA mount (it heats up with the LEDs enabled), so I moved it to the front using the Bullseye Insert plate template (thanks dpetel for Bullseye and panpankiss for blank template stl). 


***My Print Settings***
**Printer Brand:** Creality
**Printer:** Ender 3 Pro
**Rafts:** No
**Supports:** Print with flat side down. Supports are optional(?)
**Resolution:** 0.12
**Infill:** 15%
**Filament:** SUNLU PLA Black


HMG7 Lightweight Fan Guard V2.stl

This STL is a component of the Hero Me Gen7 Printhead assembly for 3D printers.

**Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.**

 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**

Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.

So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 

If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.

If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: [MediaMan3D@gmail.com](mailto:MediaMan3D@gmail.com)

If you want Hero Me documentation… The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs.  You will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

Endoscope

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Hero Me Documentation - Details.stl

5.5mm Nozzle Endoscope Mount for Bullseye

HMG7 Lightweight Fan Guard V2.stl

HMG7 Turbine Fan Guard.stl

HMG7 Velocity Stack Fan Guard.stl

HMG7 Jet Fan Guard.stl

HMG7.2 4mm flat zip tie cable clip.stl

HMG7 BMG PTFE Collar Insert C.stl

HMG7.2 4mm flat cable clip.stl

HMG7 40mm Fan Dial Gauge Holder Screw.stl

HMG7.4 NeoPixel Mount.stl

HMG7.3 LED Curved Bar Lightweight 5015 Ducts V3.stl

HMG7.4 8mm Endoscope Tall Mount.stl

HMG7 Duct Offset Check v5.stl

HMG7.3 Pen Plotter Right Mount.stl

HMG7 BMG PTFE Collar Insert B.stl

HMG7 BMG PTFE Collar Insert A.stl

HMG7.4 4mm Spacer for Skirt Mount.stl

HMG7 40mm Fan Dial Gauge Holder Press.stl

HMG7 LED Straight 51mm Lightweight 5015 Ducts.stl