This 6in drum would make a perfect addition to any drummer's arsenal.

Printed in PLA

It uses 65mm M5 screws with a M5 T-Nut.  (I have linked the ones I used.)

I included two different shell heights. 70mm and 60mm.

I used a soldering iron to insert the T-nuts into the bottom “lug”.

Once the t-nuts are in place just find a 6in drum head.  I have used 3 types on this drum and they all work wonderfully.

I have also included an snare attachment.

 

Hardware

Screws: 65mm M5 screws 

Nuts: M5 T-Nut

Drum Heads

Printed: https://www.printables.com/model/1216377-tpu-drum-head-or-frisbee

Traditional: https://www.sweetwater.com/c1027--6_inch_Drum_Heads?all&sb=low2high

Mesh: https://www.sweetwater.com/store/detail/SN0006--remo-silentstroke-drumhead-6-inch

Print Settings

For the rims and drums walls are the most important infill percentage and type can vary.

    Rims

    Walls - 8
    Layer height 0.2mm 
    Top Shell Layers - 6
    Bottom Shell Layers -7
    Infill - 10% Cubic

    Drums 

    Walls - 8
    Layer height 0.2mm (I also printed at 0.24 with no problem)
    Top Shell Layers - 6
    Bottom Shell Layers -7
    Infill - 7.5% Adaptive Cubic

Accessory

     Snare attachment

    Walls - 2
    Layer height 0.16 mm 
    Infill - 10% Gyroid

6in Drum

6-in-70mm-shell.stl

Create your own 3D printed practice drum pad using PLA and TPU.  Perfect for the beginning drummer or experienced percussionist!

Snare Pad Base.stl

Base.3mf

A cute little set for kids education and entertainment, we printed ours in PETG but we suggest looking at a variety of materials intended for strength. 


Filament used in photo- Polymaker PETG in Gold and Polylite in Black PLA

Drums

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

6in Drum

Snare Pad Base.stl