Headless Horseman  - Articulated Snap-Flex Fidget (Medium Tightness Joints)

PumpkinSpine_MediumTightness.stl

Flexi Pug - Articulated Dog, Style #1

FlexiPug_ArticulatedDog_Style1.stl

Lindwurm Dragon - Fidget Dragon - Ludo

Lazy Lindwurm.3mf

Round-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Round-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the *Medium* tolerance model.  For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Round-Eyed Bone Snake: https://than.gs/m/933819
Medium Tolerance Round-Eyed Bone Snake: https://than.gs/m/933823

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Round-Eyed Bone Snake, be sure to check out it’s sibling Sleek-Eyed Bone Snake:
Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Medium Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933820
Loose Tolerance Sleek Eyed Bone Snake: https://than.gs/m/933822


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Articulated Flexible Red Dragon Toy

red dragon (1).3mf

Dragon Egg Lamp

Hey, I'm glad you found my Dragon Egg Lamp.

You will need to buy a lamp socket and a bulp to assamble this.

EU Plug:

https://www.amazon.de/kwmobile-Lampenfassung-Schalter-Lampenaufh%C3%A4ngung-Pendelleuchte/dp/B07GJNQFTV?keywords=kwmobile%2Be27%2Blampenfassung&qid=1684505382&sr=8-5&th=1&linkCode=ll1&tag=ri0m0-21&linkId=eaf75460ed09825a9367f5ff362a73a5&language=de_DE&ref_=as_li_ss_tl

US Plug:

https://www.amazon.com/-/de/dp/B0BTY6VDYN/ref=sr_1_3?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=17E68V4WROX8K&keywords=Plug-in%2BLight%2BCord%2Be27&qid=1684505658&sprefix=plug-in%2Blight%2Bcord%2Be27%2Caps%2C173&sr=8-3&th=1

Bulb:

EU:

https://www.amazon.de/Kolbenform-dimmbarkeit-Farbsteuerung-Fernbedienung-Warmwei%C3%9F/dp/B07CNMGXGP?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=osram+led+mehrfarbig+e27&qid=1684505912&sr=8-4&linkCode=ll1&tag=ri0m0-21&linkId=07abaf8ee1dddbd81da2bca540915fc3&language=de_DE&ref_=as_li_ss_tl

US:

https://www.amazon.com/-/de/dp/B07NW17W9V/ref=sr_1_2?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=2R8ILT0PASFEX&keywords=e27+Multicolour+LED&qid=1684505841&sprefix=e27+multicolour+led%2Caps%2C195&sr=8-2


Print Settings:
You need the Egg and the holder assemble them like you can see in the last picture.
Egg: Use a 0.4 mm Nozzle! or a line height of 0.2 mm and a width of 0.4 mm.
Domes are quite hard to print. I always slow down the layers at the top to 50% print speed (at layer 670).
Use 100% infill with concentric infill, or set your wall count to something ridiculous like 40.
Any Basic white PLA will do the job just fine. I used Sunlu White PLA+ if that helps. Don't try Matte or glitter stuff, it will not work.
I use a brim of 10 lines to get this to stick.
It prints 16 hours for me. Be patient. The nosse usally scrapes the print at some point but thats kinda normal. This happnes beouse the curve of the print creates a spring effect.
No supports!

Holder: Print with supports.

Happy printing!
That's it. Enjoy your Lamp. :D If you made one, please consider Buying me a coffee at https://www.buymeacoffee.com/Ri0m0
I'm a poor student in need of filament.

Dragon Jar

dragon_jar.stl

Pumpkin Wyvern

Cinderwing3D Pumpkin Wyvern Colors.3mf

Wooden paint  station works with 2 disposable 9oz. water cup for eazy cleaning 

Wooden paint holder.stl

Dragon Headphone Holder/Sculpture

DRAGON HEADPHONE HEAD.stl

Storm Dragon

Cinderwing3D_StormDragon_Color.3mf

Dungeon Master Can Cozy Dicr Tower.

Dungeon Master.stl

Dragon Mug 01

TriDimen Studio_Dragon Mug.stl

Franken-Spine  - Articulated Snap-Flex Fidget (Tight Joints)

FrankenSpine_Tight_WithBody.stl

Reaper Cloak

Don't fear... Accessorize! 

While this ghostly garb might have others trembling in terror, your old bones can stride with spooky style in this long flowing fabric of fright.

Use this Reaper Cloak as decoration on its own or pair with the Skele-Spine Snap-Flex Articulated Fidget Toy for the ultimate spectral ensemble!

This Reaper Cloak is an accessory for the Skele-Spine (the fifth creation in a series of Snap-Flex models by Mimetics 3D), and it's available for free for a limited time.

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. I'm eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale to fit the Skele-Spine.  Shrinking may also result in thin walls.

The Classy Barbarian Can Cozy Dice Tower 16oz. and 12oz.

The Classy Barbarian 16OZ. Dice Mug.stl

Spike - Articulated Dragon Flexi Fidget Toy

Spike_ArticulatedDragon_Mimetics3D.stl

articulated dragon - Print in place

Discover the intricately designed 3D model of an adorable baby dragon exclusively on thangs.com. This model perfectly embodies the captivating mystique of fantasy-themed creatures, making it an excellent addition for enthusiasts of 3D printing crafts. The baby dragon, with its fascinated gaze and tiny wings, is sure to add a touch of enchantment to your collection. The model offers immense detail, from its delightful facial expression to the delicate texture of its scales, amplifying its appeal to mythical creature lovers. More than just a hobby, this 3D model will help bring the legendary tales to life. Explore the fantasy collection of Azure3D, the designer of the baby dragon model, for more enchanting creatures. Vote for Azure3D’s next 3D-inspired project right on thangs.com. Time to unleash your printer and delve into the mystical world of 3D fantasy models with this captivating baby dragon.

Check out, my other models!
What should make next?


Tubbums the articulated lizard - Print in place

fatlizard250k.stl

Articulated Dragon Keychain 005

ARTICULATED DRAGON KEYCHAIN 005 - WITH RING.stl

Dragon

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Headless Horseman - Articulated Snap-Flex Fidget (Medium Tightness Joints)

Flexi Pug - Articulated Dog, Style #1

Lindwurm Dragon - Fidget Dragon - Ludo

Round-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

Articulated Flexible Red Dragon Toy

Dragon Egg Lamp

Dragon Jar

Pumpkin Wyvern

Wooden paint station works with 2 disposable 9oz. water cup for eazy cleaning

Dragon Headphone Holder/Sculpture

Storm Dragon

Dungeon Master Can Cozy Dicr Tower.

Dragon Mug 01

Franken-Spine - Articulated Snap-Flex Fidget (Tight Joints)

Reaper Cloak

The Classy Barbarian Can Cozy Dice Tower 16oz. and 12oz.

Spike - Articulated Dragon Flexi Fidget Toy

articulated dragon - Print in place

Tubbums the articulated lizard - Print in place

Articulated Dragon Keychain 005