Dragon

_Body_01.stl

Articulated Coatl Dragon by Mesh Mayhem

Articulated  Dragon by Mesh Mayhem.stl

Cute little baby dragon - articulated

#18 cute little baby dragon - articulated.stl

articulated dragon - Print in place

Discover the intricately designed 3D model of an adorable baby dragon exclusively on thangs.com. This model perfectly embodies the captivating mystique of fantasy-themed creatures, making it an excellent addition for enthusiasts of 3D printing crafts. The baby dragon, with its fascinated gaze and tiny wings, is sure to add a touch of enchantment to your collection. The model offers immense detail, from its delightful facial expression to the delicate texture of its scales, amplifying its appeal to mythical creature lovers. More than just a hobby, this 3D model will help bring the legendary tales to life. Explore the fantasy collection of Azure3D, the designer of the baby dragon model, for more enchanting creatures. Vote for Azure3D’s next 3D-inspired project right on thangs.com. Time to unleash your printer and delve into the mystical world of 3D fantasy models with this captivating baby dragon.

Check out, my other models!
What should make next?


Baby Dragon Bowl

Baby_Dragon_Bowl.stl

The Legend Can Cozy Dice Tower

The Legend Mug.stl

Dragon Long

This dragon when stretched out is roughly 22 inches.  
Heavily scaling this dragon down may cause the links in the tail to be weaker. Want a smaller dragon? Check out our other dragons that are available on our profile.

Dragon Bookends

dragon bookends colored.3mf

Flexi Yeti - Articulated Fidget Toy

FlexiYeti_BambuMulticolor_Mimetics3D.3mf

Cute Flexi Baby Dragon Toy / Keychain - FREE

Dragon_v4.stl

Snappy Cat  - Prepainted 3MF for Bambu Users (Snap-Flex: All Tolerances)

**Print-In-Place, No Supports, Articulating Fidget Toy**

**Pre-Painted 3MF of all Snap-Flex joint tolerances**

Looks like the cat's out of the bag.  When you're feeling frisky or need a quick paws from the hassles of everyday life, reach for your purr-fect pocket pal.  

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Snap-Flex Collection:**
This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. 

Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

**Snap-Flex Instructions:**
To Lock: Push Body Segments together
To Unlock: Pull Body Segments Apart


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

Please try out each to see what works best for you, and let me know which version you prefer!

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.


**Other Models:**

If you like Snappy Cat, be sure to check out the latest spooky articulated model here:
**Tight Tolerance Franken-Spine:**
https://than.gs/m/956746
**Medium Tolerance Franken-Spine:**
https://than.gs/m/956751
**Loose Tolerance Franken-Spine:**
https://than.gs/m/956752


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
Brim Suggested
**No Supports, Print-In-Place at 100% scale** 
Printing any smaller may disable the Snap-Flex joint.

Printing larger than 100% will make the snap louder AND **harder to pop**, so be sure to do a shorter test print to make sure it's not **TOO hard to snap into place.**

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Dragon Shorty

Short and tubby articulating dragon that is a fast and cute print. 

Sleek-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Sleek-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.
This is the *Loose* tolerance model.  For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Medium Tolerance Sleek Eyed Bone Snake: https://than.gs/m/933820

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Sleek-Eyed Bone Snake, be sure to check out it’s sibling Round-Eyed Bone Snake:
Tight Tolerance Round-Eyed Bone Snake: https://than.gs/m/933819
Medium Tolerance Round-Eyed Bone Snake: Coming Soon
Loose Tolerance Round-Eyed Bone Snake: Coming Soon


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Glaciercoil Articulated Dragon

Glaciercoil.stl

Articulated Skeleton Hands

Skeleton FINGER  FULL.stl

Round-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Round-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.
This is the Tight tolerance model.  For the other tolerances, please check out the other versions of the model below:

Medium Tolerance Round-Eyed Bone Snake: Coming Soon
Loose Tolerance Round-Eyed Bone Snake: Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Round-Eyed Bone Snake, be sure to check out it’s sibling Sleek-Eyed Bone Snake:
Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Medium Tolerance Sleek-Eyed Bone Snake: Coming Soon
Loose Tolerance Sleek Eyed Bone Snake: Coming Soon


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Round-Eyed Bone Snake - Articulated Snap-Flex Fidget

Articulated Dragon Keychain 018

ARTICULATED DRAGON KEYCHAIN 018 - WITH RING.stl

Mini Winged Dragon

Printzee_MiniWingedDragon_15mmClearance.3mf

Velociraptor Head Wall Mounted Holder / No Supports / 3MF Included

Head single color.stl

Dragon Egg Lamp

Hey, I'm glad you found my Dragon Egg Lamp.

You will need to buy a lamp socket and a bulp to assamble this.

EU Plug:

https://www.amazon.de/kwmobile-Lampenfassung-Schalter-Lampenaufh%C3%A4ngung-Pendelleuchte/dp/B07GJNQFTV?keywords=kwmobile%2Be27%2Blampenfassung&qid=1684505382&sr=8-5&th=1&linkCode=ll1&tag=ri0m0-21&linkId=eaf75460ed09825a9367f5ff362a73a5&language=de_DE&ref_=as_li_ss_tl

US Plug:

https://www.amazon.com/-/de/dp/B0BTY6VDYN/ref=sr_1_3?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=17E68V4WROX8K&keywords=Plug-in%2BLight%2BCord%2Be27&qid=1684505658&sprefix=plug-in%2Blight%2Bcord%2Be27%2Caps%2C173&sr=8-3&th=1

Bulb:

EU:

https://www.amazon.de/Kolbenform-dimmbarkeit-Farbsteuerung-Fernbedienung-Warmwei%C3%9F/dp/B07CNMGXGP?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=osram+led+mehrfarbig+e27&qid=1684505912&sr=8-4&linkCode=ll1&tag=ri0m0-21&linkId=07abaf8ee1dddbd81da2bca540915fc3&language=de_DE&ref_=as_li_ss_tl

US:

https://www.amazon.com/-/de/dp/B07NW17W9V/ref=sr_1_2?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=2R8ILT0PASFEX&keywords=e27+Multicolour+LED&qid=1684505841&sprefix=e27+multicolour+led%2Caps%2C195&sr=8-2


Print Settings:
You need the Egg and the holder assemble them like you can see in the last picture.
Egg: Use a 0.4 mm Nozzle! or a line height of 0.2 mm and a width of 0.4 mm.
Domes are quite hard to print. I always slow down the layers at the top to 50% print speed (at layer 670).
Use 100% infill with concentric infill, or set your wall count to something ridiculous like 40.
Any Basic white PLA will do the job just fine. I used Sunlu White PLA+ if that helps. Don't try Matte or glitter stuff, it will not work.
I use a brim of 10 lines to get this to stick.
It prints 16 hours for me. Be patient. The nosse usally scrapes the print at some point but thats kinda normal. This happnes beouse the curve of the print creates a spring effect.
No supports!

Holder: Print with supports.

Happy printing!
That's it. Enjoy your Lamp. :D If you made one, please consider Buying me a coffee at https://www.buymeacoffee.com/Ri0m0
I'm a poor student in need of filament.

Dragon

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Dragon

Articulated Coatl Dragon by Mesh Mayhem

Cute little baby dragon - articulated

articulated dragon - Print in place

Baby Dragon Bowl

The Legend Can Cozy Dice Tower

Dragon Long

Dragon Bookends

Flexi Yeti - Articulated Fidget Toy

Cute Flexi Baby Dragon Toy / Keychain - FREE

Snappy Cat - Prepainted 3MF for Bambu Users (Snap-Flex: All Tolerances)

Dragon Shorty

Sleek-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

Glaciercoil Articulated Dragon

Articulated Skeleton Hands

Round-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget

Articulated Dragon Keychain 018

Mini Winged Dragon

Velociraptor Head Wall Mounted Holder / No Supports / 3MF Included

Dragon Egg Lamp