Epcot Spaceship Earth Amazon Echo Dot 2nd Gen Stand with Cover

Epcot Spaceship Earth Amazon Echo Dot 2nd Gen Stand

AT-AT Star Wars HueForge

I love the AT-AT outside Star Tours at Disney World's Hollywood Studios!  Instead of white, I used ProtoPasta Glitter Flake Stardust.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA PolyLite Dark Blue Transmission Distance: 0.5
	PLA PolyLite Starlight Mercury Transmission Distance: 2.5
	PLA PolyLite Starlight Neptune Transmission Distance: 1
	PLA Protopasta Nebula Multicolor Transmission Distance: 16
	PLA PolyLite Pro White Transmission Distance: 5

Swap Instructions:
	Start with Dark Blue
	At layer #7 (0.64mm) swap to Starlight Mercury
	At layer #10 (0.88mm) swap to Starlight Neptune
	At layer #16 (1.36mm) swap to Nebula Multicolor
	At layer #18 (1.52mm) swap to White for the rest.

Fig Pin Board

Fig pin rim.stl

Star Wars First Order Stormtrooper Sergeant - HueForge

Star Wars First Order Stormtrooper Sergeant from Rise of the Resistance at Galaxy's Edge - Disney World Hollywood Studios

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA PolyTerra Lava Red Transmission Distance: 1
	PLA PolyLite Grey Transmission Distance: 1
	PLA PolyLite Starlight Mercury Transmission Distance: 2.5
	PLA PolyLite Pro White Transmission Distance: 5

Swap Instructions:
	Start with Charcoal Black
	At layer #7 (0.64mm) swap to Lava Red
	At layer #9 (0.8mm) swap to Grey
	At layer #14 (1.2mm) swap to Starlight Mercury
	At layer #20 (1.68mm) swap to White for the rest.


EPCOT at Night HueForge

EPCOTNight_Front_150x125_S.stl

Darth Vader HueForge Photo

Darth Vader at Disney's Hollywood Studios! I played around with the "rules" of HueForge to make his lightsaber red!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA PolyLite Steel Grey Transmission Distance: 1
	PLA PolyLite Pro White Transmission Distance: 5
	PLA Protopasta Star Dust Silver Glitter Transmission Distance: 17
	PLA ProtoPasta Candy Apple Metallic Red HTPLA

Swap Instructions:
	Start with Charcoal Black
	At layer #7 (0.64mm) swap to Steel Grey
	At layer #13 (1.12mm) swap to White
	At layer #16 (1.36mm) swap to Star Dust Silver Glitter
	At layer #21 (1.76mm) swap to Red for the rest


Raven - Liberty Square Disney World

This raven spooked me near Liberty Square at Walt Disney's Magic Kingdom! 

Have fun playing with moody colours!  I had fun with some combos in HueForge!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA PolyLite Dark Blue Transmission Distance: 0.5
	PLA PolyLite Starlight Neptune Transmission Distance: 1
	PLA PolyLite Starlight Mercury Transmission Distance: 2.5
	PLA PolyLite Steel Grey Transmission Distance: 1
	PLA Protopasta Bobbi's Purple Iris Transmission Distance: 17

Swap Instructions:
	Start with Dark Blue
	At layer #7 (0.64mm) swap to Starlight Neptune
	At layer #8 (0.72mm) swap to Starlight Mercury
	At layer #15 (1.28mm) swap to Steel Grey
	At layer #20 (1.68mm) swap to Bobbi's Purple Iris for the rest.


Spaceship Earth Night Light

spaceship earth single color monorail.stl

Disney Springs HueForge "Postcard"

DisneySprings_Front_121x175_S.stl

Mickey Mouse Jack-O-Lantern

HEAD.stl

Lieutenant Bek - Star Wars Rise of the Resistance HueForge

Lt. Bek was a Mon Calamari lieutenant in the Resistance. I encountered him at Star Wars Galaxy's Edge in Walt Disney World.

Have fun with this HueForge!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA PolyLite Dark Blue Transmission Distance: 0.5
	PLA PolyLite Steel Grey Transmission Distance: 1
	PLA PolyLite Lime Green Transmission Distance: 3.5
	PLA PolyLite Starlight Mercury Transmission Distance: 2.5

Swap Instructions:
	Start with Dark Blue
	At layer #8 (0.72mm) swap to Steel Grey
	At layer #12 (1.04mm) swap to Lime Green
	At layer #16 (1.36mm) swap to Starlight Mercury for the rest.

Lt. Bek - Star Wars Rise of the Resistance HueForge

Madame Leota Poster - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA PolyLite Pro Dark Purple Transmission Distance: 0.3
	PLA Sunlu Purple Transmission Distance: 6
	PLA PolyLite Starlight Neptune Transmission Distance: 1
	PLA PolyLite Lime Green Transmission Distance: 3.5

Swap Instructions:
	Start with Dark Purple
	At layer #7 (0.64mm) swap to Purple
	At layer #11 (0.96mm) swap to Starlight Neptune
	At layer #15 (1.28mm) swap to Lime Green for the rest.


Hollywood Tower of Terror HueForge

A beautiful night shot of the lights on the Hollywood Tower of Terror!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA PolyLite Dark Blue Transmission Distance: 0.5
	PLA PolyLite Pro Purple Transmission Distance: 1
	PLA PolyLite Starlight Neptune Transmission Distance: 1
	PLA PolyLite Lime Green Transmission Distance: 3.5
	PLA Protopasta Gold Dust Glitter Transmission Distance: 17

Swap Instructions:
	Start with Dark Blue
	At layer #7 (0.64mm) swap to Purple
	At layer #10 (0.88mm) swap to Starlight Neptune
	At layer #16 (1.36mm) swap to Lime Green
	At layer #18 (1.52mm) swap to Gold Dust Glitter for the rest.


Disney World

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Epcot Spaceship Earth Amazon Echo Dot 2nd Gen Stand with Cover

AT-AT Star Wars HueForge

Fig Pin Board

Star Wars First Order Stormtrooper Sergeant - HueForge

EPCOT at Night HueForge

Darth Vader HueForge Photo

Raven - Liberty Square Disney World

Spaceship Earth Night Light

Disney Springs HueForge "Postcard"

Mickey Mouse Jack-O-Lantern

Lieutenant Bek - Star Wars Rise of the Resistance HueForge

Madame Leota Poster - HueForge

Hollywood Tower of Terror HueForge

Celebration Balloon Ears

Minnie Mouse Jack-O-Lantern

Main Street Pumpkin Ears

Food & Wine Ears

Astronaut Mouse Night Light

Pin Trading Ears

Star Wars Jedi and Sith Holocron Wall Mount