Pokemon Bulbasaur Lowpoly 

Bulbasaur.stl

Geometric world map (resized version)

full.stl

 Baby Slug

Baby Slug FREE.3mf

Zørp-O'-Lantern Head

Zorp_Head.stl

The forbidden pear

The forbidden pear.3mf

Ghost Walker

Ghost_.stl

Dragon Yin Yang Clock

Dragons_Yin_Yang_Clock.stl

A-Frame Cabin Lamp - No Supports, No AMS - Christmas Day 13 - Light - Lighting

a-frame-cabin.stl

Giant Snowman - Saint Patrick's Day Edition

Demo - Assembled.3mf

Amiibo Hexagon Display / No supports

Amiibo Hexagonal v2.stl

Flowery Whatsit Ornament Suncatcher

*What is it?*
This is part of a series of designs that were originally intended as Christmas tree ornaments and I later found also made great suncatchers for any time of year (when printed with transparent filament/resin). This is the second in the series to be published.

Beyond that, what is it? Well, it's kind of a snowflake pattern (5 points instead of 6), kind of a star, kind of flowery, and bears a large resemblance to gothic architecture. Mostly, it's just a cool geometric design that I enjoy looking at.

*How to Hang it*
I've included two small, well hidden loops behind one of the arms so you can tie coat thread on them and hang it up. See the detail photo included above. They are really small and very well hidden.

**Print Settings**
You shouldn't need a raft or brim. 

*Print Time*
Depending on the wall thickness, these printed in 2-3 hours for me.

*Thickness*
If you want to use these as Christmas ornaments, I recommend trying to print this with 1 line (0.4mm) walls. As a suncatcher, it looks good with 1 or 2 line walls (I prefer 2). I needed to make the walls with 2 lines (0.8mm) to get a good print from the TTYT3D Silky Orange. I set the top/bottom thickness to 0.3mm.

You probably have your printer set up to print 1.2mm walls and top/bottom thickness. Don't use those settings for this design unless you plan to use it as a paperweight. If you forget to change them, cancel the print and start over.

*Flow*
I increased the flow to 110% for the outer walls and 105% for the inner.

*Infill*
This doesn't need any infill. Seriously. Don't add it unless you want to use this as a paperweight.

*Speed*
I print the first layer at 18mm/second. That makes sure that the complicated design gets good bed adhesion without a raft or brim. It also adds less time to the print and less clean-up than using a raft or a brim. If you have a cold bed, you might need the raft or brim anyway.

For all other layers, I use:
* 30mm/second outer wall speed
* 40mm/second inner wall speed
* 60mm/second overall speed

Star Wars May The Pumpkin Spice Be With You Decorative Sign (MMU Version)

 Spice up your decor this fall with this Star Wars/Fall themed "May The Pumpkin Spice Be With You" decorative wall sign

Fun sign perfect for fans of Star Wars and Pumpkin Spice. MMU Version with hanger slots on the back for wall hanging.

Decoration

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Pokemon Bulbasaur Lowpoly

Geometric world map (resized version)

Baby Slug

Zørp-O'-Lantern Head

The forbidden pear

Ghost Walker

Dragon Yin Yang Clock

A-Frame Cabin Lamp - No Supports, No AMS - Christmas Day 13 - Light - Lighting

Giant Snowman - Saint Patrick's Day Edition

Amiibo Hexagon Display / No supports

Flowery Whatsit Ornament Suncatcher

Star Wars May The Pumpkin Spice Be With You Decorative Sign (MMU Version)

Heart Bowl

PIGGY TOWER OF PISA | ITALIAN PIGGY BANK MONUMENT

Mini Candy Cane Dragon

Swoop 1 Christmas Stretch Ornament 2024

Boo Sign

Bean bag as a wine bottle holder

Scruffy Bear Heart Swing

Demented Carrot