This drawer organizer is 45mm high and 55mm wide (inner size of cells). It's easy to print and can be assembled in different ways. No glue is required: everything is connect by snap joints. 
The following items are included in the model:
- 1x1 cell   
- 1x2 cell
- 2x2 cell
- lock for cell connection (snap joint)
- end piece to close the lock opening (snap joint)
Every cell size comes in two variations (open bottom and closed bottom) and with two lid versions. Check the video for assembly instructions

Drawer organizer H45W55 

H45_B55_cell_2x2.stl

**Edit on 5/24/24, New Version B Clip:** I've added a version B clip after a helpful suggestion from a user who noted that the original clips might slide off the sides sometimes. The new version B clip is designed to stay securely in place, ensuring a better user experience.

Embrace the charm of 60s design fused with modern simplicity in this Groovy Modular Organizer. This customizable system offers three different shelf types and three different drawers, allowing you to combine them into an infinite number of options, perfectly blending style with functionality. Whether standing upright or laid horizontally, this organizer adjusts to your preferences and space requirements. Ideal for any area where you need to organize tiny knick-knacks without sacrificing style—be it your home office, craft room, bathroom, or living area.

Inspired by the sleek, clean lines typical of 60s aesthetics, this organizer is touched by kitsch charm, adding a vibrant yet sophisticated look to any room. Each component features an innovative outer shelf with connection points on each drawer section, allowing for a high degree of customization in orientation. The system includes clips that securely lock each box together, ensuring a durable setup. Stack and expand horizontally or vertically to utilize every inch of your space effectively.


**Print Settings**
- No brim needed.
No supports are necessary for printing. For the clips, I recommend positioning them on their side with the narrow part touching the build plate to eliminate the need for supports. Additionally, it's advisable to print the shelf with the connection points facing down towards the plate for optimal results.
- 10% infill
- 2-3 walls
- 0.4mm nozzle
- 0.2mm layer height

**Assembly**
To learn the technique for connecting each shelf, please watch this video: https://youtu.be/ZfQCY7tjM8E

This design features three different drawer sizes and three shelf configurations to match your chosen drawer size. It also includes two unique flower shapes. I printed the flowers separately and simply glued them onto the front using super glue.

Modular Groovy Flower Drawer Organizer System: A Retro, Customizable Storage Solution

pixelandpapier_groovy_organizer_shelf_3.stl

pixelandpapier_groovy_organizer_drawer_medium.stl

pixelandpapier_groovy_organizer_flower_clip__version_B.stl

Simple drawer handle with aesthetically pleasing design. Handle swivels up/down and helps hide the screw holes. Entire design is only half an inch thick with rounded corners so it does not catch onto clothing. 

Swivel Drawer Handle

Drawer Handle (1).stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for instructions and a complete look at the GEN2 collection.
_______________________

The EdgeLabel Series is a collection of modular drawer faceplates for the GEN2 Decor Series. These faceplates are designed to make labeling drawers simple while adding a clean, modern handle style that pairs nicely with the original GEN2 drawers.

V1.3 has been redesigned from the ground up to print faster, use less material, require less bridging, and install more easily. Accent pieces now attach using new mini dovetail clips instead of full-length rails, making larger faceplates much easier to assemble. The faceplates also snap into place more securely, with new locking clips available for upcoming v2602 Decor Drawers as an alternative to using M3 screws.

The EdgeLabel Series is designed to be easy to customize, whether you are using a multicolor 3D printer or a single-color printer with filament swaps. Print the accent pieces face down on a textured build plate for a great finished look, then add your own text, icons, or color combinations to match your setup.

Try it out first for free [⬇HERE](https://than.gs/m/1292349)

**V1.3 Compatibility Notes**

• Main EdgeLabel faceplates are fully backwards compatible with all GEN2 Decor Drawers.  
• New optional Faceplate Back Covers are only compatible with the upcoming v2602 Decor Drawers.  
• Some sizes are being made available ahead of the full v2602 Decor Drawer release.  
• New locking clips are designed for v2602 Decor Drawers and can be used as an alternative to M3 screws.  
• Many new sizes have been added, including support for larger drawer sizes such as 4W-2H.

**What You'll Need**

Visit **[Jerrari3D.com](https://www.jerrari3d.com/gen2-modular-system)** for a list of compatible GEN2 Decor Drawers.

**HARDWARE**  
_Includes affiliated links to help support my projects_

• Filament - PLA, PETG, or your preferred decorative filament  
• Optional M3 screws: M3x6 [(I prefer this kit)](https://amzn.to/3LSaQFv)  
• Optional locking clips for compatible v2602 Decor Drawers  

Find more GEN2 Decor Drawer options and sizes at **[Jerrari3D.com](https://www.jerrari3d.com/gen2-modular-system)**

---

## UPDATES

**UPDATE V1.3 (5-13-2026)**

• Faceplates have been redesigned from the ground up.  
• Redesigned to print faster, use less material, and require less bridging.  
• Accent pieces now attach using mini dovetail clips instead of full-length rails, making installation easier on larger faceplates.  
• Faceplates snap into place more securely.  
• New locking clips are compatible with v2602 Decor Drawers as an alternative to using M3 screws.  
• Optional Faceplate Back Covers added for upcoming v2602 Decor Drawers.  
• Many new sizes added, including larger drawer sizes such as 4W-2H.  

*Main faceplates are fully backwards compatible with all GEN2 Decor Drawers. Optional Faceplate Back Covers require v2602 Decor Drawers.*

**UPDATE V1.2 (3-15-2025)**

• This update introduced even more customization by splitting the faceplates into multiple parts that snap together with compliant mechanisms. Create beautiful faceplates even without a multicolor 3D printer.  
• Print accent pieces face down on textured plates for outstanding results.

**UPDATE V1.1 (1-20-2025)**

• This update removed the M3 nut slot and instead uses a new self-tapping hole for M3 screws.  
• Divided the faceplates to allow for an optional additional color if desired. This can also be toggled or modified for fun appearances.

---

## INSTRUCTIONS

See attached instructions.

GEN2 Decor - Faceplate - EdgeLabel

1w-3h-accent.stl

1w-3h-back-cover.stl

2w-1h-accent.stl

2w-1h-back-cover.stl

2w-2h-accent.stl

2w-2h-back-cover.stl

2w-3h-accent.stl

2w-3h-back-cover.stl

2w-05h-back-cover.stl

2w-15h-accent.stl

2w-15h-back-cover.stl

3w-1h-accent.stl

3w-1h-back-cover.stl

3w-2h-accent.stl

3w-2h-back-cover.stl

3w-05h-back-cover.stl

3w-15h-accent.stl

3w-15h-back-cover.stl

4w-1h-accent.stl

4w-1h-back-cover.stl

4w-2h-accent.stl

4w-2h-back-cover.stl

4w-05h-back-cover.stl

4w-15h-accent.stl

4w-15h-back-cover.stl

edgelabel-1w-2h.3mf

edgelabel-1w-3h.3mf

edgelabel-1w-3h.stl

edgelabel-2w-1h.3mf

edgelabel-2w-1h.stl

edgelabel-2w-2h.3mf

edgelabel-2w-2h.stl

edgelabel-2w-3h.3mf

edgelabel-2w-3h.stl

edgelabel-2w-05h.3mf

edgelabel-2w-05h.stl

edgelabel-2w-15h.3mf

edgelabel-2w-15h.stl

edgelabel-3w-1h.3mf

edgelabel-3w-1h.stl

edgelabel-3w-2h.3mf

edgelabel-3w-2h.stl

edgelabel-3w-05h.3mf

edgelabel-3w-05h.stl

edgelabel-3w-15h.3mf

edgelabel-3w-15h.stl

edgelabel-4w-1h.3mf

edgelabel-4w-1h.stl

edgelabel-4w-2h.3mf

edgelabel-4w-2h.stl

edgelabel-4w-05h.3mf

edgelabel-4w-05h.stl

edgelabel-4w-15h.3mf

edgelabel-4w-15h.stl

1w-1h-accent.stl

1w-1h-back-cover.stl

1w-2h-accent.stl

1w-2h-back-cover.stl

1w-05h-back-cover.stl

1w-15h-accent.stl

1w-15h-back-cover.stl

edgelabel-1w-1h.3mf

edgelabel-1w-1h.stl

edgelabel-1w-2h.stl

edgelabel-1w-05h.3mf

edgelabel-1w-05h.stl

edgelabel-1w-15h.3mf

edgelabel-1w-15h.stl

label-v13.stl

label-v13-bambu.3mf

label-v13-prusaslicer.3mf

| **Visit** [JERRARI.com](https://www.jerrari3d.com/) for **Instructions** and a complete look at the GEN2 collection 
_______________________

The EdgeMetal Series is a collection of drawer faceplates for the **GEN2 Decor Series**. Simply print the drawer bodies from one of the Base Drawer Models, and slide your personalized faceplate in place. Lock in place by mounting a printable handle with a M3 screw and nut.

The EdgeMetal series has a strong sharp look unlike anything else. Printed in a highly reflective filament, the angled corners generate an striking appearance. Print as one solid color or experiment with multicolor printing for some really fascinating results.

**What You'll Need**
 
**BASE DRAWER MODELS**
• GEN2 Decor Drawers - Standard - [DOWNLOAD](https://than.gs/m/1116945)
 
**HANDLE/KNOBS**
• BlockBar Series - [DOWNLOAD](https://than.gs/m/1116949)
• Crystal Series - [DOWNLOAD](https://than.gs/m/1134382)

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Silk Silver PLA](https://amzn.to/4g88Hn8) (this is what I used in many of my photos)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)

**INSTRUCTIONS**
• Print the model laying face up, no supports needed
• Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.



GEN2 Decor - Faceplate - EdgeMetal

EdgeMetal - Single - 44mm Handle.stl

Visit [JERRARI3D.com](https://www.jerrari3d.com/)  
For instructions and a complete look at the entire GEN2 collection.  
__________________________________________________

### The GEN2 Modular System
The GEN2 Modular System is a 3D printable storage solution offering ultimate flexibility and customization. Perfect for home users, hobbyists, and small businesses, it lets you print exactly what you need and customize each piece to match your unique style and space.  

Unlike store-bought sets, GEN2 lets you print only what you need and expand your setup whenever you want. The drawers snap together seamlessly, giving you unlimited expansion possibilities. With the unique QuickLock mechanism, rearranging or relocating drawers is quick and effortless—so your storage can grow and adapt with you.  

---

### GEN2 Chevron Series
Where 3D printing meets home design, bringing the signature GEN2 modular system into spaces beyond the workshop. With its clean, angled pattern and subtle texture, the Chevron faceplate adds a modern, furniture-like touch whether it’s organizing coffee pods, craft supplies, or small tools.  

Designed for full customization, each faceplate supports your choice of handle or knob attached with standard M3 screws, letting you tailor both function and style. From carbon-fiber-infused prints that pop on a workbench to soft neutral tones that complement a kitchen counter, the Chevron Series proves that 3D-printed storage can look at home anywhere.  

---

### What You’ll Need
**BASE DRAWER MODELS**  
• GEN2 Decor Drawers – Standard – [DOWNLOAD](https://than.gs/m/1116945)  

**HANDLES / KNOBS**  
• BlockBar Series – [DOWNLOAD](https://than.gs/m/1116949)  
• Crystal Series – [DOWNLOAD](https://than.gs/m/1134382)  
• Deco Handle / Knob Collection – [DOWNLOAD](https://than.gs/m/1159960)  

**HARDWARE**  
Includes affiliated links to help support my projects:  
• Filament – [Poplar Wood Filament](https://amzn.to/3X0rYzz) (used in many of my photos). Use a hardened nozzle for abrasive filaments.  
• M3 nuts and screws – Stainless-Steel or Steel (screw length may vary depending on your faceplate and drawer combo—kits like [this one](https://amzn.to/3LSaQFv) offer a variety of lengths to help you find the perfect fit).  

---

### Optional Accessories
Take your Decor setup even further with compatible accessories and inserts:  
• K-Cup Insert – Perfect for coffee stations and home setups – [DOWNLOAD](https://than.gs/m/1159960)  
• Additional GEN2 Decor Add-ons – Organizers, inserts, and new modules are always being added at [JERRARI3D.com](https://www.jerrari3d.com/).  

---

### Instructions
1. Push M3 nuts into the slots on handles or knobs.  
2. Slide the faceplate into position on your GEN2 Decor Drawer.  
3. Insert an M3 screw from inside the drawer, through the faceplate, and into the handle’s nut to secure it in place.  

*Note:* Some handle designs include self-tapping screw versions, so M3 nuts are not always required.  

---

### Slicing Tips
Both 3MF and STL files are included.  
- The 3MF file is pre-sliced and ready to print (just select your printer).  
- When using the STL file, split it into parts for multi-color printing.  
- Works in PrusaSlicer, Bambu Studio, and similar slicers.  
- Prints face down for textured build plates or face up—no supports required.  

---

### Updates
**2025-10-04** – Recreated all models from the ground up to support the latest faceplate design, now compatible with all Decor Drawer sizes including 3W and 4W units.  

---

### License
The Non-Commercial license applies only to selling printed models.  
You’re absolutely welcome to use my designs in commercial environments—I actually encourage you to use them anywhere you see fit! 👍  


GEN2 Decor - Faceplates - Chevron

1W-1H - V2 - Handle.stl

1W-2H - V2 - Handle.stl

1W-05H - V2 - Handle.stl

1W-15H - V2 - Handle.stl

2W-1H - V2 - Handle.stl

2W-2H - V2 - Handle.stl

2W-05H - V2 - Handle.stl

2W-15H - V2 - Handle.stl

3W-1H - V2 - Handle.stl

3W-05H - V2 - Handle.stl

4W-1H - V2 - Handle.stl

4W-05H - V2 - Handle.stl

1W-1H - V2 - Handle.3mf

1W-2H - V2 - Handle.3mf

1W-05H - V2 - Handle.3mf

1W-15H - V2 - Handle.3mf

2W-1H - V2 - Handle.3mf

2W-2H - V2 - Handle.3mf

2W-05H - V2 - Handle.3mf

2W-15H - V2 - Handle.3mf

3W-1H - V2 - Handle.3mf

3W-05H - V2 - Handle.3mf

4W-1H - V2 - Handle.3mf

4W-05H - V2 - Handle.3mf

1W-1H - V2 - Knob.stl

1W-2H - V2 - Knob.stl

1W-05H - V2 - Knob.stl

1W-15H - V2 - Knob.stl

2W-1H - V2 - Knob.stl

2W-2H - V2 - Knob.stl

2W-05H - V2 - Knob.stl

2W-15H - V2 - Knob.stl

3W-1H - V2 - Knob.stl

3W-05H - V2 - Knob.stl

4W-1H - V2 - Knob.stl

4W-05H - V2 - Knob.stl

1W-1H - V2 - Knob.3mf

1W-2H - V2 - Knob.3mf

1W-05H - V2 - Knob.3mf

1W-15H - V2 - Knob.3mf

2W-1H - V2 - Knob.3mf

2W-2H - V2 - Knob.3mf

2W-05H - V2 - Knob.3mf

2W-15H - V2 - Knob.3mf

3W-1H - V2 - Knob.3mf

3W-05H - V2 - Knob.3mf

4W-1H - V2 - Knob.3mf

4W-05H - V2 - Knob.3mf

**Edit on 5/24/24, New Version B Clip:** I've added a version B clip after a helpful suggestion from a user who noted that the original clips might slide off the sides sometimes. The new version B clip is designed to stay securely in place, ensuring a better user experience.

Embrace the charm of midcentury design fused with modern simplicity in this Modular Midcentury Drawer Organizer. This customizable system allows you to personalize your storage solution, perfectly blending style with functionality. Whether standing upright or laid horizontally, this organizer adjusts to your preferences and space requirements. Ideal for any area where you need to organize tiny knick-knacks without sacrificing style—be it your home office, craft room, bathroom or living area.

Inspired by the sleek, clean lines typical of midcentury aesthetics, this organizer is touched by kitsch charm, adding a vibrant yet sophisticated look to any room. Each component features an innovative outer shelf with connection points on each drawer section, allowing for a high degree of customization in orientation. The system includes clips that securely lock each box together, ensuring a durable setup. Stack and expand horizontally or vertically to utilize every inch of your space effectively.

**Print Settings**
- No brim needed.
- No supports are necessary for printing. For the clips, I recommend positioning them on their side with the narrow part touching the build plate to eliminate the need for supports. Additionally, it's advisable to print the shelf with the connection points facing down towards the plate for optimal results.
- 10% infill
- 2-3 walls
- 0.4mm nozzle
- 0.2mm layer height.

**Assembly**
To learn the technique for connecting each shelf, please watch this video: https://youtu.be/ZfQCY7tjM8E

**PLA Used**:
- Gold stars: https://amzn.to/3B4OIWv
-Pink Shelves: https://amzn.to/4bafycI
- Green Drawers: https://amzn.to/4dnPDQG,  https://proto-pasta.com/products/for-the-lulz-metallic-green-htpla?aff=187, https://proto-pasta.com/collections/all/products/kermie-green-multicolor-htpla?aff=187
- Pink Drawers: https://amzn.to/49PjPkm, https://amzn.to/3QeT1TP, https://amzn.to/3vYSSNv
- Orange Drawers: https://amzn.to/3XHNJnO
- Peach Drawers: https://amzn.to/47qJaS7

Modular Midcentury Drawer Organizer System: A Retro, Customizable Storage Solution

pixelandpapier_midcentury_organizer_drawer.stl

pixelandpapier_midcentury_organizer_clip__version_B.stl

| **Visit** [JERRARI.com](https://www.jerrari3d.com/) for **Instructions** and a complete look at the GEN2 collection 

These are the original Fusion 360 CAD files uses to create the GEN2 Adjustable Steel Sheet Holder.

GEN2 Steel Sheet Holder CAD Files

Sheet Holders.3mf

This is a collection of the GEN2 Drawers in Fusion 360 and some in STEP file format ready for import. STEP files are great for opening in programs such as Autodesk Fusion and Blender, allowing you to easily edit the models. Please feel free to edit these to your liking or create remixes. If there are files you don't see but would like added please feel free to ask and I'll try to get them added here as soon as possible.

If sharing files all I ask is to not share the original STEP files from here, but rather your remixes and awesome creations 👍

Thank you

GEN2 - STEP Files

GEN2-QL Case - Single - Standard.stl

DRAWER

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Drawer organizer H45W55

Modular Groovy Flower Drawer Organizer System: A Retro, Customizable Storage Solution

Swivel Drawer Handle

GEN2 Decor - Faceplate - EdgeLabel

GEN2 Decor - Faceplate - EdgeMetal

Modular Midcentury Drawer Organizer System: A Retro, Customizable Storage Solution