The original CW01 double wishbone front suspension (created in 2015) will allow you to upgrade your Midnight Pumpkin, Lunchbox and Montero. There are two variations of the arms (the shorter standard arms and the 8mm offset arms) that you can select there. You can also select single replacement arms (left and right are the same). Please see the installation video below which will cover all the hardware you will need to complete the installation. 

Standard Offset: This option will maintain the same wheel track as the standard vehicle. Only tested with standard springs and Tamiya OEM oil shocks. 
8mm Offset HD: The 8mm offset version increases wheel track by 8mm per side and gives more clearance for alternative shocks. This version has flanges for more strength.

You will need the COMPLETE SET if you are installing them on your CW01 for the first time. A-Arm replacements alone are also an option. 

Color - All Nylon is white. Colors shown in video are painted (matte colors) as dyed options are expensive. MJF is grey. Clear coating (again, matte) is highly recommended as nylon is hygroscopic and absorbs water. 

THE MJF PRINT MATERIAL IS NOT FLEXIBLE. CRASHES CAN BREAK THE ARMS. ONLY USE THE STANDARD SILVERCAN MOTOR WITH THESE ARMS. 


Tamiya CW01 Front Double Wishbone Suspension

070001-00_1-1.stl

070005-01_1-1.stl

070005-02_1-1.stl

This is a lens set for the Tamiya Lunchbox Dodge van body. These will require you to carefully cut out the body for the tail light, side markers, and front turn signals.

These come on a sprue and I would recommend you file them apart with a small file. 

Please watch the video before you purchase them.




DODGE

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Tamiya CW01 Front Double Wishbone Suspension

Tamiya Lunchbox Dodge Van Light Lens Set