12oz CAN Can Cup... 

12oz_Can_Can_Cup_V4.step

3D Design Checklist - Model like a PRO!

Checklist_Board_V2.step

If you can't fix it, you don't own it

Fix It Own It Desktop.STL

BART SIMPSON - DECOR

BART_DECOR_BACK.stl

8BitDo SN30 Pro+ Replacement Triggers

r-trigger.stl

DM-S0020 2.1G Ultra-Micro Servo

These new tiny servos are super useful for tiny robotics. Here is the model so you can incorporate them into your designs. 

Affiliate Link: https://amzn.to/47jrcRj

Speaker Stands - Desk Clamp Mounts!

Speaker_Stands_V2.step

Mushroom Caps for Glowing Mushroom Light

cap1.stl

Traffic Cone - Multi-part

traffic_cone_DISPLAY_ONLY.stl

Serious Sam magnet

A puck-like disc with the Serious Sam logo on it. There's two holes in the back for inserting magnets, it's a tight fit but that's by design. I used E6000 to adhere the magnets but I'm sure super glue or hot glue would work. I included a picture of the magnets in the files, this is the link at the time of writing this: https://www.amazon.com/gp/product/B01BX1MC6Y/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

Voron Y Endstop Relocation w/ PG7 Cable Gland Mount

PG7_Y_Endstop_Relocation_Voron_V1.step

Crochet Handle (3.75mm)

An ergonomic handle for a 3.75mm (Size F) standard crochet hook. Tolerance fit with a small gradual taper may require heating and working to house whole hook.

#090 Shellder Pokemon Wiremon

🔥 Looking for a unique and eye-catching home decoration for your space? Check out our #090 Shellder Pokemon Wiremon Figure! 🎨 This digital template is specially designed to create a stunning home decoration figure of Shellder using a resin 3D printer. 🌟 With its intricate wire design, this figure is sure to stand out and add personality to any room. 🏠 Perfect for Pokemon fans and collectors alike, our Wiremon figure makes an excellent addition to your home decor or office desk. 💯 Don't miss out on this exclusive opportunity to own a one-of-a-kind piece of Pokemon merchandise!

1/2" Pipe Clamp mount.stl

This is a simple but stable pipe clamp that can be color coded for the type of utility being held. It is sized for 1/2" copper pipe, and requires a couple bolts/screws of your choosing to hold it in place. I saw a flat surface, so I just had to add the Brainfuse logo.

Happy Printing!

Double Rack - DIY Filament Storage - RepRack Remix!

Double_Shelf_RepRack_V3.step

DIY Space Mouse for Fusion 360 Using Magnets

Base_top.stl

Concrete candle holder “Gugelhupf”

**A beautiful concrete candle holder – easily produced at home**
Candle diameter: 16 mm - 26 mm

**What you need**
- TPU filament
- Hobby grade pouring concrete
- Water
- Optional: Acrylic colors
- Optional: Vaseline or kitchen oil

**Instructions (also check images)**
1. Print the mold in TPU – I you have not yet printed this material, check YouTube for instructions. It’s quite easy even with a beginner machine like a Ender 3V2
2. Mix the concrete according to the instructions of the manufacturer
3. Optional: Add acrylic colors to the mix
4. Optional: rub the inside of the mold with Vaseline or kitchen oil for easier separation later
5. Pour the mix into the mold
6. Optional: Bumb the filled mold lightly on your table to get rid of air bubbles
7. Wait until the mix dried. Note that the acrylic color might add to the time it takes to fully dry.
8. Remove the cast by inverting the mold and pulling it out
9. Optional: Paint the cake
10. Have fun!

Size of the finished holder: 89 x 89 x 41 mm
Don't forget to post your makes

**Print settings**
Required build volume: 100 x 100 x 60 mm
Material usage: 40g
Print time: 4h

Material: TPU 95 – other shore hardness down to 80 should work, too – but are not tested.
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

Echo dot 3 Stand 

This unique & wonderful Eye shape holder will look great in any location. Perfect for small areas or as a small surprise in a tucked-away corner.
It transforms your Amazon Echo Dot into a stylish and functional piece of decor.  A perfect gift for yourself or any Amazon Echo Dot owner!
This custom designed, 3D printed stand holds your Amazon Echo Dot in an upright position making it easier to use and hear.   
Simply place the Amazon Echo Dot into the back and feed the cable through the hole on the bottom to connect it and you're ready to go, easy! 

Easy to print without any supports. If you like my design print it and share your makes. 
Follow me on instagram: https://www.instagram.com/b3_3dtech/

Big Thread Spool

Gracewindale-Big-Thread-Spool-part2.stl

Side table

Table_01.stl

DIY

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

12oz CAN Can Cup...

3D Design Checklist - Model like a PRO!

If you can't fix it, you don't own it

BART SIMPSON - DECOR

View 66 new models

DM-S0020 2.1G Ultra-Micro Servo

Speaker Stands - Desk Clamp Mounts!

Mushroom Caps for Glowing Mushroom Light

View 10 new models

Serious Sam magnet

Voron Y Endstop Relocation w/ PG7 Cable Gland Mount

Crochet Handle (3.75mm)

View 104 new models

1/2" Pipe Clamp mount.stl

Double Rack - DIY Filament Storage - RepRack Remix!

DIY Space Mouse for Fusion 360 Using Magnets

Concrete candle holder “Gugelhupf”

Echo dot 3 Stand

View 143 new models

View 31 new models