Modern Key & Coin Catcher Bowl

B022.stl

Screwless Heart Gear Stand

Looking for a stand to display your Emmett [Screwless Heart Gear](https://www.thingiverse.com/thing:12208/files) model? Look no further than this 3D printable stand, specifically designed to hold the heart-shaped gear with ease. 
Made to perfectly fit the Screwless Heart Gear by Emmett, this stand offers a sleek, modern design that enhances the aesthetic appeal of your gear model. With its screwless design, this stand is easy to assemble and disassemble, making it the perfect option for those who want a low-maintenance display option. 
Download and print this stand today to showcase your heart gear model in style!

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

Franky

Franky Combined.stl

Christmas Snowman Candy Bowl 2024.3mf

SnowmanCandybowl2024.3mf

Baby Owlbear

Isnt he cute and dangerous? Needs some supports but makes a perfect addition!

If you would like to sell prints of our models please subscribe to thangs memberships!

Decorative (Box) Cake (Small) [Marshmallow]

This is a little present I made for the community to celebrate my birthday (June 4) 😁

What's better if not by celebrating a birthday with a fully customizable and delicious cake with yummy toppings to decorate as many cake as possible? 😋🎂

And, what's even better, is that this is not just a simple cake, but can also be used as a box to store every kind of items inside, from jewelry to your most used or precious items!
_
**No support needed.**
**Size:**
- Marshmallow [2,5 x 2,5 x 2,4 cm (W, L, H)]

⸻⸻⸻⸻⸻⸻⸻⸻

**_Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @randomizy.3d, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #randomizy when sharing your video)_**

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here:_** https://www.patreon.com/RandomizY

⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

Decorative (Box) Cake [Marshmallow]

Death Cap Mushroom

Deathcap Mushroom.3mf

Closed Spiral Christmas Ornament

**ABOUT THE DESIGN**
This is a new variation on my Christmas Balls with Integrated Stems.

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**RESIZING**
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

**PRINT TIME**
About 4 hours.

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height. I printed at 200 C with 115% flow.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 mm. 

*Infill*
This does not need any infill. JUST DON'T DO IT – especialy if you print it with transparent filament.

*Speed*
* Outer Wall: 20 mm/sec
* Top/Bottom Speed: 20 mm/sec
* Travel Speed: 50 mm/sec

*Build Plate Adhesion*
I relied on the supports for build plate adhesion. 

*Supports*
I first printed with used normal supports and an overhang angle of 67 degrees and no other supports. It worked until 2 minutes from completion, when the model came loose from the bed. When I tried again, I with an overhang angle of 64 degrees and added 8 custom supports that keep the model from wobbling. I've included a screenshot from Cura of the supports. 

I added a support blocker in the loop to keep from having supports added inside the loop.

DECORATION

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Modern Key & Coin Catcher Bowl

Screwless Heart Gear Stand

Franky

Christmas Snowman Candy Bowl 2024.3mf

Baby Owlbear

Decorative (Box) Cake (Small) [Marshmallow]

Death Cap Mushroom

Closed Spiral Christmas Ornament

Mega Charizard X

Little guardian baby dragon - compatible with Toniebox

POKEMON - LAMP

Keychain Pistol Wall Holster — For Glock & Pistol Blasters

GEN2 Decor Handles - Deco Series

GEN2 Decor - Handles - Crystal

Skull and Cat

Rounded Remote Caddy, Remote Holder

Gingerbread Cookie Dragon Egg

Knitted Grogu With Santa Claus Hat Ornament / Multiparts / 3MF Included

8 Party Pack of FULL SIZE Halloween Skulls Haunted Decor

Shelf Santa